Explicit analysis and design equations for buckling loads and minimum stiffener requirements of orthotropic and isotropic plates under compressive load braced by longitudinal stiffeners

Thin-Walled Structures

Volumn 46, Issue 12, 2008, Pages 1409-1429

  Mittelstedt, Christian ^a  

^a AIRBUS OPERATIONS GMBH   (Germany)

Author keywords

Buckling; Closed form analysis; Composites; Minimum stiffness; Stability; Stiffened plates

Indexed keywords

CLOSED-FORM ANALYSIS; COMPOSITES; MINIMUM STIFFNESS; STABILITY; STIFFENED PLATES;

BUCKLING;

EID: 51049107506     PISSN: 02638231     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.tws.2008.03.007     Document Type: Article

References (48)

1. Turvey G.J., and Marshall I.H. Buckling and postbuckling of composite plates (1995), Chapman & Hall, London
2. Timoshenko S.P. Über die Stabilität versteifter Platten. Eisenbau 12 (1921) 147-163
3. Schnadel G. Knickung von Schiffsplatten. Werft, Reederei, Hafen 6 (1930) 461-465 493-7
4. Way S. Stability of rectangular plates under shear and bending forces. J Appl Mech 3 (1936) A131-A135
5. Barbre R. Beulspannungen von Rechteckplatten mit Längssteifen bei gleichmässiger Druckbeanspruchung. Der Bauing 17 (1936) 268-273
6. Barbre R. Stabilität gleichmäßig gedrückter Rechteckplatten mit Längs- oder Quersteifen. Ingenieur-Archiv 8 (1937) 117-150
7. Barbre R. Stability of rectangular plates with longitudinal or transverse stiffeners under uniform compression. NACA-National Advisory Committee for Aeronautics-Technical Memorandum No. 904, Washington, USA; 1939
8. Hampl M. Ein Beitrag zur Stabilität des horizontal ausgesteiften Stegbleches. Der Stahlbau 10 (1937) 16 21-2
9. Stiffel R. Biegungsbeulung versteifter Rechteckplatten. Der Bauing 22 (1941) 367-381
10. Kromm A. Zur Frage der Mindeststeifigkeiten von Plattenaussteifungen. Der Stahlbau 17 (1944) 81-84
11. Chwalla E. Über die Biegebeulung der längsversteiften Platte und das Problem der Mindeststeifigkeit. Der Stahlbau 17 (1944) 84-88
12. Wang T.K. Buckling of transverse stiffened plates under shear. J Appl Mech 14 (1947) A269-A274
13. Crate H, Lo H. Effect of longitudinal stiffeners on the buckling load of long flat plates under shear. NACA-National Advisory Committee for Aeronautics-Technical Note No. 1589, Washington, USA; 1948
14. Seide P, Stein M. Compressive buckling of simply supported plates with longitudinal stiffeners. NACA-National Advisory Committee for Aeronautics-Technical Note No. 1825, Washington, USA; 1949.
15. Stein M, Fralich RW. Critical shear stress of infinitely long, simply supported plate with transverse stiffeners. NACA-National Advisory Committee for Aeronautics-Technical Note No. 1851, Washington, USA; 1949.
16. Brcic V. Über Versteifungen einer auf Schub beanspruchten rechteckigen Platte. Der Stahlbau 25 (1956) 88-90
17. Moore RL. An investigation of the effectiveness of stiffeners on shear-resistant plate-girder webs. NACA-National Advisory Committee for Aeronautics-Technical Note No. 862, Washington, USA; 1942.
18. Scott M, Weber RL. Requirements for auxiliary stiffeners attached to panels under combined compression and shear. NACA-National Advisory Committee for Aeronautics-Technical Note No. 921, Washington, USA; 1943.
19. Stevens K.A., Ricci R., and Davies G.A.O. Buckling and postbuckling of composite structures. Composites 26 (1995) 189-199
20. Kassegne S.K., and Reddy J.N. Local behaviour of discretely stiffened composite plates and cylindrical shells. Compos Struct 42 (1998) 13-26
21. Sridharan S., and Zeggane M. Stiffened plates and cylindrical shells under interactive buckling. Finite Elem Anal Des 38 (2001) 155-178
22. Guo M.W., Harik I.E., and Ren W.X. Buckling behaviour of stiffened laminated plates. Int J Solids Struct 39 (2002) 3039-3055
23. Viljoen A., Visser A.G., and Groenwold A.A. Computationally efficient analysis and optimization of stiffened thin-walled panels in shear. J Aircraft 42 (2005) 743-747
24. Linde P., Schulz A., and Rust W. Influence of modelling and solution methods on the FE-simulation of the post-buckling behaviour of stiffened aircraft fuselage panels. Compos Struct 73 (2006) 229-236
25. Wittenberg T.C., Hol J.M.A.M., and van Baten T.J. Shear buckling of flat orthotropic stiffened panels with application to glare material. AIAA J 44 (2006) 2179-2188
26. Zimmermann R., Klein H., and Kling A. Buckling and postbuckling of stringer stiffened fibre composite curved panels-tests and computations. Compos Struct 73 (2006) 150-161
27. Oh S.H.O., Kim K.S., and Kim C.G. An efficient postbuckling analysis technique for composite stiffened curved panels. Compos Struct 74 (2006) 361-369
28. Mallela U.K., and Upadhyay A. Buckling of laminated composite stiffened panels subjected to in-plane shear: a parametric study. Thin-Walled Structures 44 (2006) 354-361
29. Patel S.N., Datta P.K., and Sheikh A.H. Buckling and dynamic instability analysis of stiffened shell panels. Thin-Walled Structures 44 (2006) 321-333
30. Loughlan J. The buckling performance of composite stiffened panel structures subjected to combined in-plane compression and shear loading. Compos Struct 29 (1994) 197-212
31. Riks E. Buckling and post-buckling analysis of stiffened panels in wing box structures. Int J Solids Struct 37 (2000) 6795-6824
32. Ovesy H.R., and Assaee H. Finite strip buckling analysis of some composite stiffened box sections. AIAA J 42 (2004) 2382-2384
33. Möcker T., and Reimerdes H.G. Postbuckling simulation of curved stiffened composite panels by the use of strip elements. Compos Struct 73 (2006) 237-243
34. Kunz RK. Postbuckling of stiffened composite plates under combined loading. In: 8th DoD/NASA/FFA conference on fibrous composites in structural design, NASA CP-3087, 1989. p. 591-608.
35. Romeo G., and Frulla G. Post-buckling behaviour of graphite/epoxy stiffened panels with initial imperfections subjected to eccentric biaxial compression loading. Int J Non-Linear Mech 32 (1997) 1017-1033
36. Byklum E. Ultimate strength analysis of stiffened steel and aluminium panels using semi-analytical methods. Dissertation thesis, Norwegian University of Science and Technology, Trondheim, Norway; 2002.
37. Byklum E., and Amdahl J. A simplified method for elastic large deflection analysis of plates and stiffened panels due to local buckling. Thin-Walled Struct 40 (2002) 925-953
38. Buermann P., Rolfes R., Tessmer J., and Schagerl M. A semi-analytical model for local post-buckling analysis of stringer- and frame-stiffened cylindrical panels. Thin-Walled Struct 44 (2006) 102-114
39. Bedair O.K. The elastic behaviour of multi-stiffened plates under uniform compression. Thin-Walled Struct 27 (1997) 311-335
40. Mijuskovic O., Coric B., and Pavlovic M.N. Transverse-stiffener requirements for the post-buckling behaviour of a plate in shear. Thin-Walled Struct 34 (1999) 43-63
41. Wiedemann J. Leichtbau 1: elemente. 2nd ed. (1996), Springer, Berlin
42. Herakovich C.T. Mechanics of fibrous composites (1988), Wiley, New York
43. Jones R.M. Mechanics of composite materials (1975), Scripta Book Co., Washington
44. Reddy J.N. Mechanics of laminated composite plates and shells. 2nd ed. (2004), CRC Press, Boca Raton
45. N.N. DIN 4114-2 (02/53) Stahlbau; Stabilitätsfälle (Knickung, Kippung, Beulung). DIN-Deutsches Institut für Normung e.V., Berlin, Germany; 1953.
46. Mukhopadhyay M. Vibration and stability analysis of stiffened plates by semi-analytic finite difference method, part I: consideration of bending displacements only. J Sound Vib 130 (1989) 27-39
47. Timoshenko S.P., and Gere J.M. Theory of elastic stability. 2nd ed. (1961), McGraw-Hill Book Company Inc., New York
48. Qiao P., and Shan L. Explicit local buckling analysis and design of fiber-reinforced plastic composite structural shapes. Compos Struct 70 (2005) 468-483