On factors affecting the phase transformation and mechanical properties of cold-rolled transformation-induced-plasticity-aided steel

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 39, Issue 10, 2008, Pages 2513-2527

  Soliman, Mohamed ^a   Palkowski, Heinz ^a  

^a CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM; AUSTENITE; BAINITE; COLD ROLLING; COLD ROLLING MILLS; DUCTILITY; ELASTICITY; FERRITES; HEAT TREATING FURNACES; HEAT TREATMENT; HOT ROLLING; LIGHT METALS; MECHANICAL PROPERTIES; METAL CLADDING; MOLYBDENUM; NIOBIUM; PLASTICITY; PLASTICS; STEEL; STEEL METALLOGRAPHY; TENSILE TESTING; WEAR RESISTANCE;

ALUMINUM CONTENTS; FERRITE MORPHOLOGIES; FINAL PRODUCTS; GRAIN SIZES; MICROSTRUCTURE OBSERVATION; NB MICROALLOYED; PHASE TRANSFORMATION; RETAINED AUSTENITE; ROLLING CONDITIONS; STRUCTURE REFINEMENTS; TENSILE TESTS; TOTAL AMOUNT; TRANSFORMATION BEHAVIOR; TRANSFORMATION RATES; TRANSFORMATION-INDUCED-PLASTICITY; TRANSFORMATION-INDUCED-PLASTICITY STEELS; TRIP STEELS;

BAINITIC TRANSFORMATIONS;

EID: 50349084543     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-008-9594-2     Document Type: Article

References (52)

1. V.F. Zackay, E.R. Parker, D. Fahr, R. Busch: Trans. ASM, 1967, vol. 60, pp. 252-59
2. O. Matsumura, Y. Sakuma, H. Takechi: Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570-79
3. W.C. Jeong and J.H. Chung: HSLA Steels: Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 305-11
4. J. Maki, J. Mahieu, B.C. De Cooman, S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125-31
5. L. Tosal-Martiez, D. Vanderschueren, S. Jacobs, S. Vandeputte: Steel Res., 2001, vol. 72 (10), pp. 412-15
6. E. Girault, A. Metens, P. Jacques, Y. Houbaert, B. Verlinden, J. Van Humbeeck: Scripta Mater., 2001, vol. 44, pp. 885-92
7. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. van Humbeek, F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068-74 1068-74
8. M. De Meyer, D. Vanderschueren, B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813-22
9. W. Bleck, E. Kechagias, J. Ohlert, J. Christen, A. Moulin, H. Hofmann, and T.W. Schaumann: Optimisation of Microstructure in Multiphase Steels Containing Retained Austenite, Final Report, Technical Steel Research Series, RFCS Publications, Luxembourg, 2004, pp. 29-73
10. E. Emadoddin, A. Akbarzadeh, G. Daneshi: Mater. Charact., 2006, vol. 57, pp. 408-13
11. W. Bleck: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 13-23
12. M. Bouet, J. Root, E. Es-Sadiqi, S. Yue: Mater. Sci. Forum, 1998, vols. 284-286, pp. 319-26
13. S. Jiao, F. Hassani, R.L. Donaberger, E. Essadiqi, S. Yue: ISIJ Int., 2002, vol. 42, pp. 299-303
14. C. Capdevila, F.G. Caballero, C. García De Andrés: ISIJ Int., 2005, vol. 45, pp. 238-47
15. Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations, ASTM Standard A-1033-04, ASTM, Philadelphia, PA, 2004
16. E. Girault, P. Jacques, P. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, F. Delannay: Mater. Charact., 1998, vol. 40, pp. 111-18
17. F.S. LePera: J. Met., 1980, vol. 32, pp. 38-39
18. E. Wirthl, A. Pichler, R. Angerer, P. Stiaszny, K. Hauzenberger, Y.F. Titovets, and M. Hackl: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 61-64
19. J.Z. Zhao, C. Mesplont, B.C. De Cooman: ISIJ Int., 2001, vol. 41, pp. 492-97
20. L.P. Karjalainen, T.M. Maccagno, J.J. Jonas: ISIJ Int., 1995, vol. 35, pp. 1523-31
21. D.Q. Bai, S. Yue, W.P. Sun, J.J. Jonas: Metall. Trans. A, 1993, vol. 24A, pp. 2151-59
22. H. Palkowski, M. Soliman, and G. Kugler: Proc. TMS Ann. Mtg. Exhib., Orlando, FL, TMS, Warrendale, PA, 2007
23. X.D. Wang, B.X. Hunag, L. Wang, Y.H. Rong: Metall. Trans. A, 2008, vol. 39A, pp. 1-7
24. B. Dutta, C.M. Seller: Mater. Sci. Technol., 1987, vol. 3, pp. 197-207
25. L.P. Karjalainen: Mater. Sci. Technol., 1995, vol. 11, pp. 557-65
26. R.W. Cahn, P. Haasan: Physical Metallurgy, 4th ed., North-Holland, Amsterdam, Netherlands, 1996, p. 1601
27. H.K.D.H. Bhadeshia: Bainite in Steel, 2nd ed., IOM Commercial, Ltd., London, 2001, pp. 122-26
28. J.R. Bradley, J.M. Rigsbee, H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 323-33
29. H. Beladi, G.L. Kelly, A. Shokouhi, and P.D. Hodgson: Mater. Sci. Eng. A, 2004, vol. 371A, 343-52
30. J.B. Qu, Y.Y. Shan, M.C. Zhao, K. Yang: Mater. Sci. Technol., 2002, vol. 18, pp. 145-50
31. B. Eghbali, A. Abdollah-zadeh: J. Mater. Process. Technol., 2006, vol. 180, pp. 44-48
32. F.C. García de Andrés, F.G. Caballero, C. Capdevila, L.F. Alvarez: Mater. Charact., 2002, vol. 48, pp. 101-11
33. W.C. Jeong, C.H. Kim: J. Mater. Sci., 1985, vol. 20, pp. 4392-98
34. M. De Meyer, J. Mahieu, B.C. De Cooman: Mater. Sci. Technol., 2002, vol. 18, pp. 1121-32
35. M. Soliman, H. Palkowski: ISIJ Int., 2007, vol. 47, 1703-10
36. M.D. Geib, D.K. Matlok, G. Krauss: Metall. Trans. A, 1980, vol. 11, pp. 1683-89
37. M.K. Manna, P.C. Chakraborti: Trans. Ind. Inst. Met., 2004, vol. 57, pp. 149-56
38. J. Ohlert, W. Bleck, and K. Hulka: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 199-206
39. W. Shi, L. Li, C. Yang, R. Fu, L. Wang, P. Wollants: Mater. Sci. Eng., A, 2006, vol. 429, pp. 247-51
40. R. Petrov, L. Kestens, Y. Houbaert: ISIJ Int., 2001, vol. 41, pp. 883-90
41. Y. Sakuma, D.K. Matlock, G. Krauss: Metall. Trans. A, 1992, vol. 23A, pp. 1221-32
42. S. Hashimoto, S. Ikeda, K. Sugimoto, S. Miyake: ISIJ Int., 2004, vol. 44, pp. 1590-98
43. S. Traint, A. Pichler, K. Hauzenberger, P. Stiaszny, and E. Werner: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 121-27
44. S.-J. Kim, C.-G. Lee, I. Choi, S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 505-14
45. H. Matsuda, H.K.D.H. Bhadeshia: Proc. R. Soc. London, Ser. A, 2004, vol. 460, pp. 1707-22
46. P. Jacques: Curr. Opin. Solid State Mater. Sci.., 2004, vol. 8, pp. 259-65
47. G.I. Rees, H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1992, vol. 8, pp. 985-93
48. K. Sugimoto, T. Muramatsu, S. Hashimoto, Y. Mukaid: J. Mater. Process. Technol., 2006, vol. 177, pp. 390-95
49. L.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2331-42
50. L. Barbé, L. Tosal-Martínez, and B.C. De Cooman: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 147-51
51. M.L. Brandt, G.B. Olson: Ironmaking Steelmaking, 1993, vol. 20 (5), pp. 55-60
52. Y. Sakuma, D.K. Matlock, G. Krauss: Metall. Trans. A, 1992, vol. 23, pp. 1233-41