Mechanical properties of Epon 826/DEA epoxy

Mechanics of Time-Dependent Materials

Volumn 12, Issue 3, 2008, Pages 249-272

  Jordan, Jennifer L ^a   Foley, Jason R ^a   Siviour, Clive R ^b  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b UNIVERSITY OF OXFORD   (United Kingdom)

Author keywords

Epoxy; Glassy polymer; High strain rate mechanical properties; Mulliken Boyce model

Indexed keywords

CHLORINE COMPOUNDS; EPOXY RESINS; MECHANICAL PROPERTIES; PAINTING; PHOTODISSOCIATION; RESINS; STRAIN;

APPLICATIONS.; COMPRESSIVE PROPERTIES; EPOXY; GLASSY POLYMER; HIGH STRAIN RATE MECHANICAL PROPERTIES; HIGH STRAIN RATES; MULLIKEN-BOYCE MODEL; STATIC LOADS; STRUCTURAL APPLICATIONS;

STRAIN RATE;

EID: 49749083811     PISSN: 13852000     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11043-008-9061-x     Document Type: Article

References (57)

1. Alifanov, O.M.: Inverse Heat Transfer Problems. Springer, Berlin (1994)
2. Anand, L., Ames, N.M.: On modeling the micro-indentation response of an amorphous polymer. Int. J. Plast. 22(6), 1123-1170 (2006)
3. Arruda, E.M., Boyce, M.C.: Evolution of plastic anisotropy in amorphous polymers during finite straining. Int. J. Plast. 9(6), 697-720 (1993)
4. Bar-Shalom, Y., Li, X.R., et al.: Estimation with Applications to Tracking and Navigation. Wiley, New York (2001)
5. Bauwens-Crowet, C.: The compression yield behaviour of PMMA over a wide range of temperature and strain-rates. J. Mater. Sci. 8, 968-979 (1973)
6. Bauwens-Crowet, C., Bauwens, J.C., et al.: The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests. J. Mater. Sci. 7, 176-183 (1972)
7. Bauwens, J.C.: Relation between the compression yield stress and the mechanical loss peak of bisphenol-A-polycarbonate in the β transition range. J. Mater. Sci. 7, 577-584 (1972)
8. Bergstrom, J.S., Boyce, M.C.: Constitutive modeling of the large strain time-dependent behavior of elastomers. J. Mech. Phys. Solids 46(5), 931-954 (1998)
9. Boyce, M.C., Kear, K., et al.: Deformation of thermoplastic vulcanizates. J. Mech. Phys. Solids 49(5), 1073-1098 (2001)
10. Boyce, M.C., Parks, D.M., et al.: Large inelastic deformation of glassy polymers, part I: rate dependent constitutive model. Mech. Mater. 7(1), 15-33 (1988)
11. Boyce, M.C., Socrate, S., et al.: Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition. Polymer 41(6), 2183-2201 (2000)
12. Briscoe, B.J., Hutchings, I.M.: Impact yielding of high density polyethylene. Polymer 17, 1099-1102 (1976)
13. Briscoe, B.J., Nosker, R.W.: The influence of interfacial friction on the deformation of high density polyethylene in a split Hopkinson pressure bar. Wear 95, 241-262 (1984)
14. Briscoe, B.J., Nosker, R.W.: The flow stress of high density polyethylene at high rates of strain. Polym. Commun. 26, 307-308 (1985)
15. Brown, E.N., Willms, R.B., et al.: Influence of molecular conformation on the constitutive response of polyethylene: a comparison of HDPE, UHMWPE, and PEX. Exp. Mech. 46 (2007)
16. Buckley, C.P., Dooling, P.J., et al.: Deformation of thermosetting resins at impact rates of strain, part 2: constitutive model with rejuvenation. J. Mech. Phys. Solids 52(10), 2355-2377 (2004)
17. Buckley, C.P., Harding, J., et al.: Deformation of thermosetting resins at impact rates of strain, part I: Experimental study. J. Mech. Phys. Solids 49(7), 1517-1538 (2001)
18. Chen, W., Lu, F., et al.: Tension and compression tests of two polymers under quasi-static and dynamic loading. Polym. Test. 21(2), 113-121 (2002)
19. Chen, W., Zhang, X.: Dynamic response of Epon 828/T-403 under multiaxial loading at various temperatures. J. Eng. Mater. Technol. Trans. ASME 119(3), 305-308 (1997)
20. Chen, W., Zhou, B.: Constitutive behavior of Epon 828/T-403 at various strain rates. Mech. Time-Depend. Mater. 2(2), 103-111 (1998)
21. Chin, W., Hwu, J., et al.: Curing behavior and thermal properties of Epon 828 resin cured with diimide-diacid and phthalic anyhydride. Polymer 39(20), 4923-4928 (1998)
22. Chou, S.C., Robertson, K.D., et al.: The effect of strain rate and heat developed during deformation on the stress-strain curve of plastics. Exp. Mech. 13, 422-432 (1973)
23. Enns, J.B., Gillham, J.K.: Effect of the extent of cure on the modulus, glass transition, water absorption, and density of an amine-cured epoxy. J. Appl. Polym. Sci. 28(9), 2831-2846 (1983)
24. Foreman, J.P., Porter, D., et al.: Thermodynamic and mechanical properties of amine-cured epoxy resins using group interaction modeling. J. Mater. Sci. 40, 6631-6638 (2006)
25. Garg, M., Mulliken, A.D., et al.: Temperature rise in polymeric materials during high rate deformation. J. Appl. Mech. 75, 011009-1-011009-8 (2008)
26. Gilat, A., Goldberg, R.K., et al.: Strain rate sensitivity of epoxy resin in tensile and shear loading. J. Aerospace Eng. 20(2), 75-89 (2007)
27. Goldberg, D.E.: Genetic Algorithms in Search, Optimization, and Machine Learning. Addison Wesley, Boston (1989)
28. Gorham, D.A.: Measurement of stress-strain properties of strong metals at very high rates of strain. Inst. Phys. Conf. Ser. 47, 16-24 (1979)
29. Gorham, D.A., Pope, P.H., et al.: An improved method for compressive stress strain measurement at very high strain rates. Proc. R. Soc. Lond. 438, 153-170 (1992)
30. Gray III, G.T.: Classic split-Hopkinson pressure bar testing. In: Kuhn, H., Medlin, D. (eds.) Mechanical Testing and Evaluation. ASM Handbook, vol. 8, pp. 462-476. ASM International, Materials Park (2002)
31. Gray III, G.T., Blumenthal, W.R.: Split-Hopkinson pressure bar testing of soft materials. In: Kuhn, H., Medlin, D. (eds.) Mechanical Testing and Evaluation. ASM Handbook, vol. 8, pp. 488-496. ASM International, Materials Park (2000)
32. Hasan, O.A., Boyce, M.C.: A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers. Polym. Eng. Sci. 35(4), 331-344 (1995)
33. Hu, Y., Xia, Z., et al.: Deformation behavior of an epoxy resin subject to multiaxial loadings, part I: experimental investigations. Polym. Eng. Sci. 43(3), 721-733 (2003)
34. Jia, D., Ramesh, K.T.: A rigorous assessment of the benefits of miniaturization in the Kolsky bar system. Exp. Mech. 44, 445-454 (2004)
35. Katz, D., Smooha, Y., et al.: Dynamic properties of an unfilled and filled epoxy resin subjected to extensional creep. J. Mater. Sci. 15(5), 1167-1174 (1980)
36. Khan, M.Z.S., Simpson, G., et al.: A comparison of the mechanical properties in compression of two resin systems. Mater. Lett. 52(3), 173-179 (2002)
37. Kozey, V., Kumar, S.: Compressive behavior of epoxy resins. In: International SAMPE Technical Conference (1994)
38. Kukureka, S.N., Hutchings, I.M.: Measurement of the mechanical properties of polymers at high strain rates by Taylor impact. In: Blazynski, T.Z. (ed.) Proc. 7th Int. Conf. on High Energy Rate Fabrication, pp. 29-38. University of Leeds, Leeds (1981)
39. Lu, H., Tan, G., et al.: Modeling of constitutive behavior for Epon 828/T-403 at high strain rates. Mech. Time-Depend. Mater. 5(2), 119-130 (2001)
40. Mendenhall, W.: Introduction to Probability and Statistics, pp. 55-88. Duxbury, Belmont (1971)
41. Mentha, S.N., Pope, P.H., et al.: Progress in metal testing with a 3 mm pressure bar. Inst. Phys. Conf. Ser. 70, 175-176 (1984)
42. Mitchell, M.: An Introduction to Genetic Algorithms. MIT Press, Cambridge (1998)
43. Miwa, M., Takeno, A., et al.: Strain rate and temperature dependence of shear properties of epoxy resin. J. Mater. Sci. 30(7), 1760-1765 (1995)
44. Mulliken, A.D.: Low to high strain rate deformation of amorphous polymers: experiments and modeling. MSc thesis, Department of Mechanical Engineering. Cambridge, Massachusetts Institute of Technology (2004)
45. Mulliken, A.D.: Mechanics of amorphous polymers and polymer nanocomposites during high rate deformation. PhD thesis, Mechanical Engineering. Cambridge, Massachusetts Institute of Technology (2006)
46. Mulliken, A.D., Boyce, M.C.: Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates. Int. J. Solids Struct. 43(5), 1331-1356 (2006)
47. Mulliken, A.D., Soong, S.Y., et al.: High-rate thermomechanical behavior of poly(vinyl chloride) and plasticized poly(vinyl chloride). J. Phys. IV 134, 217-223 (2006)
48. Rietsch, F., Bouette, B.: The compression yield behaviour of PC over a wide range of strain rates and temperatures. Eur. Polym. J. 26, 1071-1075 (1990)
49. Siviour, C.R., Walley, S.M., et al.: The high strain rate compressive behavior of polycarbonate and polyvinylidene fluoride. Polymer 46, 12546-12555 (2005)
50. Siviour, C.R., Walley, S.M., et al.: Mechanical behaviour of polymers at high rates of strain. J. Phys. IV 134, 949-955 (2006)
51. Tasker, D.G., Dick, R.D., et al.: Mechanical properties of explosives under high deformation loading conditions. In: Shock Compression of Condensed Matter. American Institute of Physics, New York (1997)
52. Tasker, D.G., Dick, R.D., et al.: Mechanical properties of explosives under high deformation loading conditions. In: Shock Compression of Condensed Matter. American Institute of Physics, New York (1998)
53. Trautmann, A., Siviour, C.R., et al.: Lubrication of polycarbonate at cryogenic temperatures in the split Hopkinson pressure bar. Int. J. Impact Eng. 31, 523-544 (2005)
54. Truong, V.T.: Effect of displacement rate and curing conditions on the fracture behaviour of crosslinked epoxy systems. Polymer 31(9), 1669-1677 (1990)
55. Walley, S.M., Field, J.E.: Strain rate sensitivity of polymers in compression from low to high rates. DYMAT J. 1(3), 211-227 (1994)
56. Williams, J.G.: The beta relaxation in epoxy resin-based networks. J. Appl. Polym. Sci. 23, 3433-3444 (1979)
57. Xia, Z., Hu, Y., et al.: Deformation behavior of an epoxy resin subject to multiaxial loadings, part II: constitutive modeling and predictions. Polym. Eng. Sci. 43(3), 734-748 (2003)