Effects of biodiesel from used frying palm oil on the exhaust emissions of an indirect injection (IDI) diesel engine

Energy and Fuels

Volumn 22, Issue 4, 2008, Pages 2796-2804

  Ozsezen, Ahmet Necati ^a   Canakci, Mustafa ^a   Sayin, Cenk ^b  

^a KOCAELI UNIVERSITY   (Turkey)

^b MARMARA UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

BIODIESEL; BIOINFORMATICS; CARBON DIOXIDE; CARBON MONOXIDE; COMBUSTION; DIESEL ENGINES; DIESEL FUELS; DIESEL LOCOMOTIVES; ENGINES; HYDROCARBONS; IGNITION; OIL WELL PRODUCTION; SMOKE; THERMOCHEMISTRY; VEGETABLE OILS;

BRAKE THERMAL EFFICIENCIES; ENGINE SPEEDS; EXHAUST EMISSIONS; FUEL BLENDS; GAS PRESSURES; INDIRECT INJECTIONS; LOAD CONDITIONS; MAXIMUM BRAKE TORQUES; PALM OILS; PREMIXED COMBUSTIONS; SHORTER IGNITION DELAYS; SMOKE OPACITIES; SPECIFIC FUEL CONSUMPTIONS; START OF INJECTIONS; UNBURNED HYDROCARBONS;

LEAKAGE (FLUID);

EID: 49649111680     PISSN: 08870624     EISSN: None     Source Type: Journal    
DOI: 10.1021/ef800174p     Document Type: Article

References (51)

1. Ozsezen, A. N. Investigation of the effects of biodiesel produced from waste palm oil on the engine performance and emission characteristics. Ph.D. Dissertation, Kocaeli University, Turkey, 2007; pp 4-7.
2. Knothe, G.; Dunn, R.; Bagby, M. Biodiesel: The use of vegetable oils and their derivatives as alternative diesel fuels. In ACS Symp. Ser. 666: Fuels and Chemicals from Biomass; American Chemical Society: Washington, D.C., 1997; pp 172-208.
3. Last, R. J.; Krüger, M.; Dürnholz, M. SAE Paper 950054, 1995.
4. Environmental Protection Agency (EPA). A comprehensive analysis of biodiesel impacts on exhaust emissions. Report EPA420-P-02-001, 2002.
5. Ullman, T. L.; Spreen, K. B.; Mason, R. L. SAE Paper 941020, 1994.
6. Yamane, K.; Ueta, A.; Shimamoto, Y. Int. J. Eng. Res. 2001, 2 (4), 249-261.
7. Schmidt, K.; Van Gerpen, J. H. SAE Paper 961086, 1996.
8. x emissions from biofuels for compression-ignition engines. ASAE Annual Meeting, 2005; 056115.
9. Signer, M.; Heinze, P.; Mercogliano, R.; Stein, H. J. SAE Paper 961074, 1996.
10. Peterson, C. L.; Taberski, J. S.; Thompson, J. C.; Chase, C. L. Trans. ASAE 2000, 43 (6), 1371-1381.
11. x solutions for biodiesel. Report NREL/SR-510-31465; National Renewable Energy Laboratory (NREL), Golden, CO, 2003.
12. Canakci, M.; Van Gerpen, J. H. Trans, ASAE 2003, 46 (4), 945-954.
13. Haas, J. M.; Scott, K. M.; Alleman, T. L.; McCormick, R. L. Energy Fuels 2001, 15 (5), 1207-1212.
14. Graboski, M. S.; Ross, J. D.; McCormick, R. L. SAE Paper 961166, 1996.
15. Ziejewski, M.; Goettler, H. J.; Haines, H.; Huang, C. SAE Paper 961846, 1996.
16. Scholl, K. W.; Sorenson, S. C. SAE Paper 930934, 1993
17. Ulusoy, Y.; Tekin, Y.; Cetinkaya, M.; Karaosmanoglu, F. Energy Sources 2004, 26, 927-932.
18. Schumacher, L. G.; Marshall, W.; Krahl, J.; Wetherell, W. B.; Grabowski, M. S. Trans. ASAE 2001, 44 (6), 1465-1468.
19. Gomez Gonzales, M. E.; Howard-Hildige, R.; Leahy, J. J.; O'Reilly, T. O.; Supple, B.; Malone, M. Environ. Monit. Assess. 2000, 65, 13-20.
20. Dorado, M. P.; Ballesteros, E.; Arnal, J. M.; Gomez, J.; Lopez, F. J. Fuel 2003, 82 (11), 1311-1315.
21. Clark, N. N.; Lyons, D. W. Trans. ASAE 1999, 42 (5), 1211-1220.
22. Senatore, A.; Cardone, M.; Rocco, V.; Prati, M. V. SAE Paper 2000-01-0691, 2000.
23. Schumacher, L.; Borgelt, S. C.; Hires, W. G.; Wetherell, W.; Nevils, A. SAE Paper 962233, 1996.
24. Chang, Y. Z.; Van Gerpen, J. H.; Lee, I.; Johnson, L. A.; Hammond, E. G.; Marley, S. J. J. Am. Oil Chem. Soc. 1996, 73 (11), 1549-1555.
25. Sharp, C. A. Characterization of biodiesel exhaust emissions for EPA 211(b). Report 08-1039A; National Biodiesel Board (NBB), Jefferson City, MO, 1998.
26. Sharp, C. A.; Howell, S.; Jobe, J. SAE Paper 2000-01-1967, 2000.
27. McDonald, J. F. Evaluation of a yellow grease methyl ester and petroleum diesel fuel blend. Final Report to the Agricultural Utilization Research Institute, 1997.
28. Purcell, D. L.; McClure, B. T.; McDonald, J.; Basu, H. N. J. Am. Oil Chem. Soc. 1996, 73 (3), 381-388.
29. McDonald, J. F.; Purcell, D. L.; McClure, B. T.; Kittelson, D. B. SAE Paper 950400, 1995.
30. Peterson, C. L.; Reece, D. L.; Thompson, J. C.; Beck, S. M.; Chase, C. Biomass Bioenergy 1996, 10 (5/6), 331-336.
31. Bosch. Automotive Handbook; Robert Bosch GmbH: Stuttgart, Germany, 2000, pp 380-382.
32. Rakopoulos, C. D.; Antonopoulos, K. A.; Rakopoulos, D. C.; Giakoumis, E. G. Appl. Therm. Eng. 2006, 26 (14-15), 1611-1620.
33. Owen, K.; Coley, T. Automotive Fuels Reference Book; Society of Automotive Engineers (SAE): Warrendale, PA, 1995; p 375.
34. Heywood, J. B. Internal Combustion Engine Fundamentals; McGraw-Hill: New York, 1988; pp 491-497, 209, 571.
35. Abdel-Rahman, A. A. Int. J. Energy Res. 1998, 22 (6), 483-513.
36. Challen, B.; Baranescu, R. Diesel Engine Reference Book; Butterworth Heinemann: Woburn, MA, 1999; pp 97, 479.
37. Ozsezen, A. N.; Canakci, M.; Sayin, C. Energy Fuels 2008, 22 (2), 1297-1305.
38. Pulkrabek, W. W. Engineefing Fundamentals of the Internal Combustion Engine; Prentice-Hall: Upper Saddle River, NJ, 1997; p 338.
39. Peterson, C. L.; Hustrulid, T. Biomass Bioenergy 1998, 14 (2), 91-101.
40. Agarwal, A. K.; Das, L. M. J. Eng. Gas Turbines Power 2001, 123 (2), 440-447.
41. Körbitz, W. Renewable Energy 1999, 16 (1-4), 1078-1083.
42. Wu, Y. G.; Lin, Y.; Chang, C. T. Fuel 2007, 86 (17-18), 2810-2816.
43. Borman, G. L.; Ragland, K. W. Combustion Engineering; McGraw-Hill: New York, 1998; pp 216, 415.
44. Bosch. Diesel-Engine Management: An Overview; Robert Bosch GmbH: Stuttgart, Germany, 2003; p 27.
45. Society of Automotive Engineers, Inc. SAE Handbook; SAE: Warrendale, PA, 2001; Vol. 1, pp 1304-1306.
46. Beatrice, C.; Bertoli, C.; D'Alessio, J.; Del Giacomo, N.; Lazzaro, M.; Massoli, P. Combust. Sci. Technol. 1996, (120), 335-355.
47. Song, J.; Cheenkachom, K.; Wang, J.; Perez, J.; Boehman, A. L. Energy Fuels 2002, 294-301.
48. Wang, W. G.; Lyons, D. W.; Clark, N. N.; Gautam., M.; Norton, P. M. Environ. Sci. Technol. 2000, 34, 933-939.
49. Asaumi, Y.; Shintani, M.; Watanabe, Y. SAE Paper 922214, 1992.
50. Betts, W. E.; Floysand, S. A.; Kvinge, F. SAE Paper 922190, 1992.
51. Rosenthal, M. L.; Bendinsky, T. SAE Paper 932800, 1993.