Corrosion performance of medium-strength and silica fume high-strength reinforced concrete in a chloride solution

Cement and Concrete Composites

Volumn 27, Issue 1, 2005, Pages 117-124

  Kayali, O ^a   Zhu, B ^a  

^a UNIVERSITY OF NEW SOUTH WALES   (Australia)

Author keywords

Chloride ions diffusion; High strength concrete; Reinforcement corrosion; Silica fume

Indexed keywords

CHLORINE COMPOUNDS; COMPRESSIVE STRENGTH; CORROSION; CORROSION RESISTANCE; DIFFUSION; PH EFFECTS; STRUCTURE (COMPOSITION);

CHLORIDE IONS DIFFUSION; HIGH STRENGTH CONCRETE; REINFORCEMENT CORROSIONS; SILICA FUMES;

REINFORCED CONCRETE;

EID: 4944264690     PISSN: 09589465     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cemconcomp.2004.02.040     Document Type: Article

References (50)

1. Page C.L. Mechanism of corrosion protection in reinforced concrete marine structures. Nature. 258(5535):1975;514-515.
2. Broomfield J.P. Assessing corrosion damage on reinforced concrete structures. Swamy R.N. Corrosion and corrosion protection of steel in concrete. Proc. Intl. Conf. 1994;1-25 Sheffield Academic Press, Sheffield.
3. Gonzalez J.A., Feliu S., Rodriguez P., Ramirez E., Alonso C., Andrade C. Some questions on the corrosion of steel in concrete - Part I: when, how and how much steel corrodes. Mater. Struct. 29(January-February):1996;40-46.
4. Moukwa M. Penetration of chloride ions from sea water into mortars under different exposure conditions. Cem. Concr. Res. 19(6):1989;894-904.
5. Page C.L., Ngala V.T., Parrot L.J., Yu S.W. Diffusion in cementitious materials: further investigations of chloride and oxygen diffusion in well-cured opc and opc/30% PFA pastes. Cem. Concr. Res. 25(4):1995;819-826.
6. ASTM. Standard test method for half-cell potentials of uncoated reinforcing steel in concrete, C876-91. In: Annual book of ASTM standards, vol. 4.02. 1999. p. 1-6.
7. Van Daveer J.R. Techniques for evaluating reinforced concrete bridge decks. J. Am. Concr. Inst. 72(12):1975;697-704.
8. Glass G.K., Buenfeld N.R. The presentation of the chloride threshold level for corrosion of steel in concrete. Corros. Sci. 39(5):1997;1001-1013.
9. Kayyali O.A., Haque M.N. The Cl-/OH- ratio in chloride-contaminated concrete - a most important criterion. Mag. Concr. Res. 47(172):1995;235-242.
10. British Standards Institution Structural use of concrete BS 8110, Part 1. 1985;BSI, London.
11. ACI Building code requirements for structural concrete-ACI 318-95. 1995;ACI, Detroit.
12. AS Concrete structures. 2001;Standards Association of Australia, Sydney.
13. ACI Committee 222 Protection against corrosion in new construction. ACI J. 82(1):1985;13-23.
14. Petersen C. RCT profile grinding kit for in-situ evaluation of chloride diffusion coefficient and the remaining service life of a reinforced concrete structure. Chloride Ingress in Concrete Structures Symposium. 1993;1-10 Chalmers Technical University, Gothenberg.
15. ASTM. Standard test method for acid soluble chloride in mortar and concrete C1152, concrete and aggregates. In: Annual book of ASTM standards, vol. 4.02. 1993.
16. ASTM. Test methods for chemical analysis of hydraulic cement C114. In: Annual book of ASTM standards, vol. 4.01. Cement; Lime; Gypsum; 1995 [section 4].
17. Feliu S., Andrade C., Gonzalez J.A., Alonso C. A new method for in-situ measurement of electrical resistivity of reinforced concrete. Mater. Struct. 29(July):1996;362-365.
18. Gonzalez J.A., Feliu S., Rodriguez P., Lopez W., Ramirez E., Alonso C., et al. Some questions on the corrosion of steel in concrete. Part II: corrosion mechanism and monitoring, service life prediction and protection methods. Mater. Struct. 29:1996;40-46.
19. Andrade C., Alonso C. Corrosion rate monitoring in the laboratory and on site. Constr. Build. Mater. 10(5):1996;315-328.
20. Grantham M.G., Broomfield J.P. The use of linear polarisation corrosion rate measurements in aiding rehabilitation options for deck slabs of reinforced concrete underground car park. Constr. Build. Mater. 11(4):1997;215-224.
21. RILEM Technical Committee TC154-EMC. Electrochemical techniques for measuring corrosion in concrete, progress report 1994-1997. Mater Struct 1997;31(April):153-7.
22. Stern M., Geary A.L. Electrochemical polarization, no. 1, theoretical analysis of the shape of polarization curves. J. Electrochem. Soc. 104(1):1957;56-63.
23. Andrade C., Castelo V., Alonso C., Gonzalez J.A. Determination of the corrosion rate of steel embedded in concrete. ASTM Special Technical Publication STP 906. 1986;63-64 American Society for Testing and Materials, Philadelphia.
24. Andrade C., Alonso C. On-site measurements of corrosion rate of reinforcements. Constr. Build. Mater. 15(2-3):2001;141-145.
25. Broomfield J.P., Rodriguez J., Ortega L.M., Garcia A.M. Corrosion rate measurement and life prediction for reinforced concrete structures. Structural faults and repair. 1993;155-164 University of Edinburgh.
26. Feliu S., Gonzalez C., Feliu J., Andrade M.C. Confinement of the electrical signal for in situ measurement of polarization resistance in reinforced concrete. Am. Concr. Inst. Mater. J. 87(5):1990;457-460.
27. Feliu S., Gonzalez C., Andrade C., Feliu V. On-site determination of the polarization resistance in a reinforced concrete beam. Corrosion. 44(10):1988;761-765.
28. Broomfield J.P., Anguilar A., Sagues A.A., Powers R.G. Corrosion measurements of reinforcing steel in partially submerged concrete slabs. Berke N.S., Chaker V., Whiting D. Corrosion rates of steel in concrete. ASTM STP 1065. 1990;66-85 American Society for Testing and Materials, Philadelphia.
29. Baweja D., Roper H., Sirivivatnanon V. Specification of concrete for marine environments: a fresh approach. The Australia-US workshop on high performance concrete. 1997;411-422 Curtin University, Perth.
30. Andrade C., Alonso C., Gonzalez J.A. An initial effort to use corrosion rate measurements for estimating rebar durability. Berke N.S., Chaker V., Whiting D. Corrosion rates of steel in concrete. ASTM STP 1065. 1990;29-37 American Society for Testing and Materials, Philadelphia.
31. Al-Amoudi O.S.B., Maslehuddin M., Lashari A.N., Almusallam A.A. Effectiveness of corrosion inhibitors in contaminated concrete. Cem. Concr. Compos. 25(4-5):2003;439-449.
32. Rodriguez P., Ramirez E., Gonzalez J.A. Methods for studying corrosion in reinforced concrete. Mag. Concr. Res. 46(167):1994;81-90.
33. Lambert P., Page C.L., Vassie P.R.W. Investigations of reinforcement corrosion. 2. Electrochemical monitoring of steel in chloride contaminated concrete. Mater. Struct. 24(143):1991;351-358.
34. Alonso C., Andrade C., Castellote M., Castro P. Chloride threshold values to depassivate reinforcing bars embedded in a standardized OPC mortar. Cem. Concr. Res. 30(7):2000;1047-1055.
35. Vassie P.R.W. Reinforcement corrosion and the durability of concrete bridges. Proc. Inst. Civil Eng. Part 1. 76(August):1984;713-723.
36. Treadaway K.W.J., Cox R.N., Brown B.L. Durability of corrosion resisting steels in concrete. Proc. Inst. Civil Eng. Part 1. 86(April):1989;305-332.
37. Dhir R.K., Jones M.R., McCarthy M.J. PFA concrete: chloride-induced reinforcement corrosion. Mag. Concr. Res. 46(169):1994;269-277.
38. Zhu B. Durability of reinforced concrete in association with chloride induced corrosion, MSc thesis. Canberra: School of Civil Engineering, University College, University of New South Wales; 1999.
39. Montemor M.F., Simoes A.M.P., Salta M.M. Effect of fly ash on concrete reinforcement corrosion studied by EIS. Cem. Concr. Compos. 22(3):2000;175-185.
40. Neville A., Aitcin P.-C. High performance concrete - an overview. Mater. Struct. 31(206):1998;111-117.
41. Dhir R.K., Hubbard F.H., Munday J.G.L., Jones M.R., Duerden S.L. Contribution of PFA to concrete workability and strength development. Cem. Concr. Res. 18(2):1988;277-289.
42. Swamy RN, Laiw JC. Effectiveness of supplementary cementing materials in controlling chloride penetration into concrete. Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete, ACI SP-153 1995;2:675-86.
43. Ozyildirim C. Ensuring high quality silica fume concrete overlays. Fly Ash, Silica Fume, Slag Nat. Pozzolans Concr., ACI SP-153. 2:1995;675-686.
44. Bentz D.P., Jensen O.M., Coats A.M., Glasser F.P. Influence of silica fume on diffusivity in cement-based materials: I. Experimental and computer modeling studies on cement pastes. Cem. Concr. Res. 30(6):2000;953-962.
45. Bentz D.P. Influence of silica fume on diffusivity in cement-based materials: II. Multi-scale modeling of concrete diffusivity. Cem. Concr. Res. 30(7):2000;1121-1129.
46. Page C.L., Vennesland O. Pore solution composition and chloride binding capacity of silica fume-cement pastes. Mater. Struct. 16(91):1983;19-25.
47. Byfors K. Influence of silica fume and fly ash on chloride diffusion and pH values in cement paste. Cem. Concr. Res. 17(1):1987;115-130.
48. Gowripalan N., Mohamed H.M. Chloride-ion induced corrosion of galvanized and ordinary steel reinforcement in high-performance concrete. Cem. Concr. Res. 28(8):1998;1119-1131.
49. Byfors K., Hansson C.M., Tritthart J. Pore solution expression as a method to determine the influence of mineral additives on chloride binding. Cem. Concr. Res. 16(5):1986;760-770.
50. Neville A. Chloride attack in reinforced concrete: an overview. Mater. Struct. 28(176):1995;63-70.