Optical diagnostics of late-injection low-temperature combustion in a heavy-duty diesel engine

Journal of Engineering for Gas Turbines and Power

Volumn 130, Issue 3, 2008, Pages

  Lachaux, Thierry ^a   Musculus, Mark P B ^a   Singh, Satbir ^b   Reitz, Roll D ^c  

^a SANDIA NATIONAL LABORATORIES   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

^c University of Wisconsin Madison   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMBUSTION; DIESEL ENGINES; DIESEL LOCOMOTIVES; DUST; FUELS; HYDROCARBONS; INJECTION (OIL WELLS); JET PUMPS; LASER DIAGNOSTICS; LASERS; LIGHT EMISSION; LUMINESCENCE; MIXING; NUCLEAR FUEL REPROCESSING; ORGANIC COMPOUNDS; SMOKE; SOOT; THERMOCHEMISTRY; WALLS (STRUCTURAL PARTITIONS);

BROAD BANDS; COOL FLAMES; CRANK ANGLE DEGREES; FLAME COMBUSTION; FUEL IMAGING; GAS RECIRCULATION; HEAVY-DUTY DIESEL ENGINES; LASER-INDUCED INCANDESCENCE; LOW TEMPERATURES; MIE-SCATTERING; OPTICAL DIAGNOSTICS; PLANAR-LASER INDUCED FLUORESCENCE; PLIF IMAGING; PREMIXED COMBUSTION; START OF INJECTION; THIN LAYERING; TOP-DEAD CENTER; UNBURNED FUEL; UNBURNED HYDROCARBONS; WALL IMPINGEMENT;

IGNITION;

EID: 48949120527     PISSN: 07424795     EISSN: 15288919     Source Type: Journal    
DOI: 10.1115/1.2830864     Document Type: Article

References (36)

1. Kimura, S., Aoki, O., Ogawa, H., Murakana, S., and Enomoto, Y., 1999, "New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines," SAE Paper No. 1999-01-3681.
2. Kimura, S., Aoki, O., Kitahara, Y., and Aiyoshizawa, E., 2001, "Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards," SAE Paper No. 2001-01-0200.
3. x and Particulate Emissions in Direct Injection Diesel Engines," Int. J. Engine Res., 3(4), pp. 249-259.
4. Miles, P. C., Choi, D., Pickett, L. M., Singh, I. P., Henein, N., Rempel Ewert, B. H., Yun, H., and Reitz, R. D., 2004, "Rate-Limiting Processes in Late-Injection, Low-Temperature Diesel Combustion Regimes," Thiesel Conference 2004, Valencia, Spain.
5. Choi, D., Miles, P. C., Yun, H., and Reitz, R. D., 2004, "A Parametric Study of Low-Temperature, Late-Injection Combustion in a HSDI Diesel Engine," Sixth International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines (COMODIA), Yokohama, Japan, Aug. 2-5.
6. Yanagihara, H., 2002, "A Study on Combustion Structure of Premixed Compression Ignition Diesel Engines," SAE Paper No. 2002-30-0009.
7. x Emissions and the Diesel Premixed Burn," SAE Paper No. 2004-01-1401.
8. Dec, J. E., 1997, "A Conceptual Model of D. I. Diesel Combustion Based on Lased Sheet Imaging," SAE Paper No. 970873.
9. Singh, S., Reitz, R. D., and Musculus, M. P. B., 2005, "2-Colors Thermometry Experiments and High-Speed Imaging of Multimode Diesel Engine Combustion," SAE Paper No. 2005-01-3842.
10. Lachaux, T., and Musculus, M. P. B., 2007, "In-Cylinder Unburned Hydrocarbon Visualization During Low-Temperature Compression-Ignition Engine Combustion Using Formaldehyde PLIF," Proc. Combust. Inst., 31(2), pp. 2921-2929.
11. Espey, C., and Dec, J. E., 1993, "Diesel Engine Combustion Studies in a Newly Designed Optical-Access Engine Using High-Speed Visualization and 2-D Laser Imaging," SAE Paper No. 930971.
12. Zhao, H., and Ladammatos, N., 1999, Engine Combustion Instrumentation and Diagnostics, Society of Automotive Engineers, Warrendale, PA.
13. Dec, J. E., and Espey, C., 1992, "Soot and Fuel Distributions in a D. I. Diesel Engine Via 2-D Imaging," SAE Paper No. 922307.
14. Hultqvist, A., Christensen, M., Johansson, B., Franke, A., Richter, M., and Alden, M., 1999, "A Study of the Homogeneous Charge Compression Ignition Combustion Process by Chemiluminescence Imaging," SAE Paper No. 1999-01-3680.
15. Dec, J. E., and Espey, C., 1995, "Ignition and Early Soot Formation in a D. I. Diesel Engine Using Multiple 2-D Imaging Diagnostics," SAE Paper No. 950456.
16. Dec, J. E., and Espey, C., 1998, "Chemiluminescence Imaging of Autoignition in a DI Diesel Engine," SAE Paper No. 982685.
17. Dec, J. E., 1992, "Soot Distribution in a D. I. Diesel Engine Using 2-D Imaging of Laser-Induced Incandescence, Elastic Scattering, and Flame Luminosity," SAE Paper No. 920115.
18. Dec, J. E., and Kelly-Zion, P. L., 2000, "The Effects of Injection Timing and Diluent Addition on Late-Combustion Soot Burnout in a Diesel Engine Based on Simultaneous 2-D Imaging of OH and Soot," SAE Paper No. 2000-01-0238.
19. Dec, J. E., and Coy, E. B., 1996, "OH Radical Imaging in a DI Diesel Engine and the Structure of the Early Diffusion Flame," SAE Paper No. 960831.
20. Musculus, M. P. B., 2006, "Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in a Heavy-Duty Diesel Engine," SAE Paper No. 2006-01-0079.
21. Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill, New York.
22. Desantes, J. M., Payri, R., Salvador, F. J., and Gimeno, J., 2006, "Prediction of Spray Penetration by Means of Spray Momentum Flux," SAE Paper No. 2006-01-1387.
23. Espey, C., and Dec, J. E., 1995, "The Effect of TDC Temperature and Density on the Liquid-Phase Penetration in a D. I. Diesel Engine," SAE Paper No. 952456.
24. Canaan, R. E., Dec, J. E., and Green, R. M., 1998, "The Influence of Fuel Volatility on the Liquid-Phase Fuel Penetration in a Heavy-Duty D. I. Diesel Engine," SAE Paper No. 980510.
25. Siebers, D. L., 1999, "Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization," SAE Paper No. 1999-01-0528.
26. Hotta, Y., Nakakita, K., Inayoshi, M., Ogawa, T., Sato, T., and Yamada, M., 1998, "Combustion Improvement for Reducing Exhaust Emissions in IDI Die-sel Engine," SAE Paper No. 980503.
27. Tsurushima, T., Zhang, L., and Ishii, Y., 1999, "A Study of Unbumt Hydro-carbon Emission in Small DI Diesel Engines," SAE Paper No. 1999-01-0512.
28. Mueller, C. J., Pitz, W. J., Pickett, L. M., Martin, G, C., Siebers, D. L., and Westbrook, C. K., 2003, "Effects of Oxygenates on Soot Processes in DI Diesel Engines: Experiments and Numerical Simulations," SAE Paper No. 2003-01-1791.
29. Pickett, L. M., and Siebers, D. L., 2003, "Fuel Effects on Soot Processes of Fuel Jets at DI Diesel Conditions," SAE Paper No. 2003-01-3080.
30. Pickett, L. M., Siebers, D. L., and Idicheria, C. A., 2005, "Relationship Between Ignition Processes and the Lift-Off Length of Diesel Fuel Jets," SAE Paper No. 2005-01-3843.
31. Hasegawa, R., Sakata, I., Koyama, T., and Yanagihara, H., 2003, "Numerical Analysis of Ignition Control in HCCI Engine," SAE Paper No. 2003-01-1817.
32. Kee, R. J., Rupley, F. M., Meeks, E., and Miller, J. A., 1996, "A FORTRAN Chemical Kinetics Package for the Analysis of Gas Phase Chemical and Plasma Kinetics," Sandia National Laboratories.
33. Lutz, A. E., Kee, R. J., and Miller, J. A., 1988, "SENKIN: A FORTRAN Program for Predicting Homogeneous Gas Phase Chemical Kinetics With Sensitivity Analysis," Sandia National Laboratories, Report No. SAND87-8248.
34. Ladommatos, N., Suhair, M. A., Zhao, H., and Hu, Z., 1998, "Effects of EGR on Heat Release in Diesel Combustion," SAE Paper No. 980184.
35. Pickett, L. M., Caton, J. A., Musculus, M. P. B., and Lutz, A. E., 2006, "Evaluation of the Equivalence Ratio-Temperature Region of Diesel Soot Precursor Formation Using a Two-Stage Lagrangian Model," Int. J. Engine Res., 7(5), pp. 349-370.
36. Idicheria, C. A., and Pickett, L. M., 2005, "Soot Formation in Diesel Combustion Under High-EGR Conditions," SAE Paper No. 2005-01-3834.