Role of minor addition of metallic alloying elements in formation and properties of Cu-Ti-rich bulk metallic glasses

Journal of Materials Research

Volumn 23, Issue 7, 2008, Pages 1995-2002

  Park, E S ^a,b   Chang, H J ^a   Kyeong, J S ^a   Kim, D H ^a  

^a Yonsei University   (South Korea)

^b HARVARD UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYING; ALLOYING ELEMENTS; ALLOYS; COPPER; COPPER ALLOYS; ELASTICITY; ENTHALPY; FORMING; FRACTURE FIXATION; GLASS; GLASS FORMING MACHINES; LIQUID METALS; LIQUID PHASE EPITAXY; METALLIC GLASS; METALLIC SOAPS; MIXING; NICKEL; NICKEL ALLOYS; NIOBIUM; PHASE SEPARATION; PLASTICITY; PLASTICS; SEPARATION; SILICON; SILVER; THERMODYNAMICS; TIN; TURBULENT FLOW; ZIRCONIUM;

BULK METALLIC GLASSES; COMPRESSIVE PLASTICITY; ENTHALPY OF MIXING; FRACTURE STRAIN; GLASS-FORMING ABILITY; LIQUID-STATE PHASE SEPARATION; PARTIAL SUBSTITUTION; TAILORED PROPERTIES;

TITANIUM;

EID: 48749091748     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2008.0246     Document Type: Article

References (37)

1. A.L. Greer and E. Ma: Bulk metallic glasses: At the cutting edge of metals research. MRS Bull. 32, 611 (2007).
2. A. Inoue: Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 48, 279 (2000).
3. W.H. Wang: Role of minor additions in formation and properties of bulk metallic glasses. Prog. Mater. Sci. 52, 540 (2007).
4. D.B. Miracle: A structural model for metallic glasses. Nat. Mater. 3, 697 (2004).
5. H. Ma, L.L. Shi, J. Xu, Y. Li, and E. Ma: Discovering inch-diameter metallic glasses in three-dimensional composition space. Appl. Phys. Lett. 87, 181915 (2005).
6. J.H. Kim, J.S. Park, E.S. Park, W.T. Kim, and D.H. Kim: Estimation of critical cooling rates for glass formation in bulk metallic glasses through non-isothermal thermal analysis. Met. Mater. Int. 11, 1 (2005).
7. 2/63 temperature dependence. Phys. Rev. Lett. 95, 195501 (2005).
8. E.S. Park, J.H. Na, and D.H. Kim: Correlation between fragility and glass-forming ability/plasticity in metallic glass-forming alloys. Appl. Phys. Lett. 91, 031907 (2007).
9. 8 bulk metallic glass forming alloy during processing of composites. J. Appl. Phys, 83, 7993 (1998).
10. M. Calin, J. Eckert, and L. Schultz: Improved mechanical behavior of Cu-Ti-based bulk metallic glass by in situ formation of nanoscale precipitates. Scr. Mater. 48, 653 (2003).
11. E.S. Park, H.K. Lim, W.T. Kim, and D.H. Kim: The effect of Sn addition on the glass-forming ability of Cu-Ti-Zr-Ni-Si metallic glass alloys. J. Non-Cryst. Solids 298, 15 (2002).
12. E.S. Park, W.T. Kim, and D.H. Kim: The effect of In addition on the glass-forming ability of Cu-Ti-Zr-Ni-Si metallic glasses. Mater. Trans. 45, 2693 (2004).
13. E.S. Park, D.H. Kim, T. Ohkubo, and K. Hono: Enhancement of glass forming ability and plasticity by addition of Nb in Cu-Ti-Zr-Ni-Si bulk metallic glasses. J. Non-Cryst. Solids 351, 1232 (2005).
14. B. Liu and L. Liu: The effect of microalloying on thermal stability and corrosion resistance of Cu-based bulk metallic glasses. Mater. Sci. Eng., A 415, 286 (2006).
15. C.L. Ma, H. Soejima, S. Ishihara, K. Amiya, N. Nishiyama, and A. Inoue: New Ti-based bulk glassy alloys with high glass-forming ability and superior mechanical properties. Mater. Trans. 45, 3223 (2004).
16. l glass-forming alloy. Scr. Mater. 54, 835 (2006).
17. E.S. Park and D.H. Kim: Design of bulk metallic glasses with high glass forming ability and enhancement of plasticity in metallic glass matrix composites: A review. Met. Mater. Int. 11, 19 (2005).
18. A.R. Miedema: The heat of formation of alloys. Philips Tech. Rev. 36, 217 (1976).
19. L-Q. Xing, Y. Li, K.T. Ramesh, J. Li, and T.C. Hufnagel: Enhanced plastic strain in Zr-based bulk amorphous alloys. Phys. Rev. B 64, 180201R (2001).
20. M.H. Lee, J.Y. Lee, D.H. Bae, W.T. Kim, D.J. Sordelet, and D.H. Kim: A development of Ni-based alloys with enhanced plasticity. Intermetallics 12, 1133 (2004).
21. D.S. Sung, O.J. Kwon, E. Fleury, K.B. Kim, J.C. Lee, D.H. Kim, and Y.C. Kim: Enhancement of the glass forming ability of Cu-Zr-Al alloys by Ag addition. Met. Mater. Int. 10, 575 (2004).
22. E.S. Park, J.Y. Lee, and D.H. Kim: Effect of Ag addition on the improvement of glass-forming ability and plasticity of Mg-Cu-Gd bulk metallic glass. J. Mater. Res. 20, 2379 (2005).
23. 10 alloy. Scr. Mater. 54, 1569 (2006).
24. E.S. Park and D.H. Kim: Phase separation and enhancement of plasticity in Cu-Zr-Al-Y bulk metallic glasses. Acta Mater. 54, 2597 (2006).
25. E.G. Dieter: Mechanical Metallurgy, 3rd ed. (McGraw-Hill Book Company, New York, 1986).
26. 3 bulk metallic glass. Acta Mater. 51, 1167 (2003).
27. 12.6 metallic glass matrix particulate composites. J. Mater. Res. 14, 3292 (1999).
28. G. Subhash, J.R. Dowding, and L.J. Kecskes: Characterization of uniaxial compressive response of bulk amorphous Zr-Ti-Cu-Ni-Be alloy. Mater. Sci. Eng., A 334, 33 (2002).
29. A.A. Kündig, M. Ohnuma, D.H. Ping, T. Ohkubo, and K. Hono: In-situ formed two-phase metallic glass with surface fractal microstructure. Acta Mater. 52, 2441 (2004).
30. B.J. Park, H.J. Chang, W.T. Kim, and D.H. Kim: In situ formation of two amorphous phases by liquid phase separation in Y-Ti-Al-Co alloy. Appl. Phys. Lett. 85, 6353 (2004).
31. N. Mattern, U. Kühn, A. Gebert, T. Gemming, M. Zinkevich, H. Wendrock, and L. Schultz: Microstructure and thermal behavior of two-phase amorphous Ni-Nb-Y alloy. Scr. Mater 53, 271 (2005).
32. 7 bulk metallic glass. Scr. Mater. 53, 165 (2005).
33. B.J. Park, H.J. Chang, D.H. Kim, W.T. Kim, K. Chattopadhyay, T.A. Abinandanan, and S. Bhattacharyya: Phase separating bulk metallic glass: A hierarchical composite. Phys. Rev. Lett. 96, 245503 (2006).
34. E.S. Park, E.Y. Jeong, J-K. Lee, J.C. Bea, A.R. Kwon, A. Gebert, L. Schultz, H.J. Chang, and D.H. Kim: In situ formation of two glassy phases in the Nd-Zr-Al-Co alloy system. Scr. Mater. 56, 197 (2007).
35. E.S. Park, J.S. Kyeong, and D.H. Kim: Phase separation and improved plasticity by modulated heterogeneity in Cu-(Zr, Hf)- (Gd,Y)-Al metallic glasses. Scr. Mater. 57, 49 (2007).
36. E.S. Park, H.J. Chang, J.Y. Lee, and D.H. Kim: Improvement of plasticity by tailoring combination of constituent elements in Ti-rich Ti-Zr-Be-Cu-Ni bulk metallic glasses. J. Mater. Res. 22, 3440 (2007).
37. X.J. Gu, S.J. Poon, and G.J. Shiflet: Mechanical properties of iron-based bulk metallic glasses. J. Mater. Res. 22, 344 (2007).