Optimization of rolling conditions in Mg-Al-Ca alloy containing insoluble second phase particles

Materials Transactions

Volumn 49, Issue 6, 2008, Pages 1262-1269

  Watanabe, Hiroyuki ^a   Yamaguchi, Masahiro ^b   Takigawa, Yorinobu ^b   Higashi, Kenji ^b  

^a OSAKA MUNICIPAL TECHNICAL RESEARCH INSTITUTE   (Japan)

^b Osaka Prefecture University

Author keywords

Deformation inhomogeneities; High temperature deformation; Magnesium alloys; Rolling; Workability

Indexed keywords

ALLOYS; ALUMINUM; CALCIUM; CALCIUM ALLOYS; CRYSTAL GROWTH; GRAIN BOUNDARIES; GRAPHIC METHODS; HOT ROLLING MILLS; HOT WORKING; LITHOGRAPHY; MAGNESIUM PRINTING PLATES; MATRIX ALGEBRA; MECHANICAL PROPERTIES; METAL WORKING; METALS; MOLECULAR BEAM EPITAXY; PHASE INTERFACES; STRESS CONCENTRATION; STRESSES;

DIFFUSIONAL RELAXATION; EDGE CRACKS; JAPAN INSTITUTE OF METALS (CO); NON BASAL SLIPS; PARTICLE-MATRIX INTERFACE; PROCESSING CONDITIONS; ROLLED SHEETS; ROLLING CONDITIONS; ROLLING TEMPERATURES; SECOND PHASE PARTICLES; SPHERICAL PARTICLES; STRENGTH (IGC: D5/D6); WORK-PIECE (WP);

HOT ROLLING;

EID: 48249103140     PISSN: 13459678     EISSN: None     Source Type: Journal    
DOI: 10.2320/matertrans.MRA2007318     Document Type: Article

References (36)

1. A. Luo and M. O. Pekguleryuz: J. Mater. Sci. 29 (1994) 5259-5271.
2. A. Kato, H. Horikiri, A. Inoue and T. Masumoto: Mater. Sci. Eng. A 179/180 (1994) 707-711.
3. R. Ninomiya, T. Ojiro and K. Kubota: Acta Metall. Mater. 43 (1995) 669-674.
4. Y. Kawamura, K. Hayashi, J. Koike, A. Kato, A. Inoue and T. Masumoto: Mater. Sci. Forum 350-351 (2000) 111-116.
5. A. A. Luo, M. P. Balogh and B. R. Powell: Metall. Mater. Trans. 33A (2002) 567-574.
6. Y. Chino, M. Kobata, H. Iwasaki and M. Mabuchi: Mater. Trans. 43 (2002) 2643-2446.
7. K. Ozturk, Y. Zhong, A. A. Luo and Z.-K. Liu: JOM 55 No. 11 (2003) 40-44.
8. K. Hirai, H. Somekawa, Y. Takigawa and K. Higashi: Mater. Sci. Eng. A 403 (2005) 276-280.
9. S. Akiyama, H. Ueno, M. Sakamoto, H. Hirai and A. Kitahara: Materia Japan 39 (2000) 72-74.
10. K. Ueda: Kinki Sharyo Technical Report 11 (2004) 38-41.
11. Y. Chino, L. Jae-Seol, Y. Nakaura, K. Ohori and M. Mabuchi: Mater. Trans. 46 (2005) 2592-2595.
12. T. Tsukeda, R. Uchida, M. Suzuki, J. Koike and K. Maruyama: Mater. Sci. Forum 419-422 (2003) 439-444.
13. M. Liu, Q. Wang, Z. Liu, G. Yuan, G. Wu, Y. Zhu and W. Ding: J. Mater. Sci. Lett. 21 (2002) 1281-1283.
14. M. P. Liu, Q. D. Wang, X. Q. Zeng, Y. H. Wei, Y. P. Zhu and C. Lu: Z. Metallkd. 94 (2003) 886-891.
15. P. Li, B. Tang and E. G. Kandalova: Mater. Lett. 59 (2005) 671-675.
16. C. D. Yim, B. S. You, J. S. Lee and W. C. Kim: Mater. Trans. 45 (2004) 3018-3022.
17. A. Takara, Y. Nishikawa, H. Watanabe, H. Somekawa, T. Mukai and K. Higashi: Mater. Trans. 45 (2004) 2531-2536.
18. H. Watanabe, M. Yamaguchi, Y. Takigawa and K. Higashi: Mater. Sci. Eng. A 454-455 (2007) 384-388.
19. Y. Chino, M. Mabuchi, R. Kishihara, H. Hosokawa, Y. Yamada, C. Wen, K. Shimojima and H. Iwasaki: Mater. Trans. 43 (2002) 2554-2560.
20. H. Hosokawa, Y. Chino, K. Shimojima, Y. Yamada, C. Wen, M. Mabuchi and H. Iwasaki: Mater. Trans. 44 (2003) 484-489.
21. H. Watanabe and K. Ishikawa: Bulletin of Osaka Municipal Tech. Res. Inst. 123 (2004) 38-54.
22. G. S. Rao and Y. V. R. K. Prasad: Metall. Trans. 13A (1982) 2219-2226.
23. F. J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, seconded., (Pergamon, Oxford, 1995) pp. 261-270.
24. T. Mukai, M. Yamanoi, H. Watanabe, K. Ishikawa and K. Higashi: Mater. Trans. 42 (2001) 1177-1181.
25. M. F. Ashby, C. Candhi and D. M. R. Taplin: Acta Metall. 27 (1979) 699-729.
26. H. Yoshinaga and R. Horiuchi: Trans. JIM 4 (1963) 134-141.
27. R. C. Koeller and R. Raj: Acta Metall. 26 (1978) 1551-1558.
28. A. Needleman and J. R. Rice: Acta Metall. 28 (1980) 1315-1332.
29. A. H. Chokshi and A. K. Mukherjee: Acta Metall. 37 (1989) 3007-3017.
30. G. D. Lahoti and S. L. Semiatin: Metals Handbook, ninth ed., Vol. 14 Forming and Forging, (ASM International, Metals Park, 1988) p. 343.
31. H. J. Frost and M. F. Ashby: Deformation-mechanism maps, (Pergamon Press, Oxford, 1982) p. 44.
32. H. Watanabe, H. Somekawa and K. Higashi: J. Mater. Res. 20 (2005) 93-101.
33. S. W. Chung, W. J. Kim and K. Higashi: Scripta Mater. 51 (2004) 1117-1122.
34. ASM Specialty Handbook, Magnesium and Magnesium alloys, ed. by M. M. Avedesian, H. Baker, (AMS International, Materials Park, 1999) p. 274.
35. K. Ishikawa, H. Watanabe and T. Mukai: J. Mater. Sci. 40 (2005) 1577-1582.
36. K. Ishikawa, H. Watanabe and T. Mukai: Mater. Lett. 59 (2005) 1511-1515.