Fatigue of AL6XN stainless steel

Journal of Engineering Materials and Technology

Volumn 130, Issue 3, 2008, Pages 0310131-03101312

  Kalnaus, Sergiy ^a   Jiang, Yanyao ^a  

^a Reno   (United States)

Author keywords

Critical plane approach; Multiaxial fatigue; Stainless steel

Indexed keywords

CRACKS; PLASTICITY TESTING; SHEAR STRAIN; STAINLESS STEEL; TORSIONAL STRESS;

CRITICAL PLANE APPROACH; CYCLIC PLASTICITY; EQUIVALENT PLASTIC STRAIN; MULTI-AXIAL FATIGUE; MULTIAXIAL FATIGUE CRITERIA; STRAIN LIFE CURVE; TENSION COMPRESSIONS; THREE PARAMETERS;

FATIGUE OF MATERIALS;

EID: 48149102397     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2931154     Document Type: Article

References (25)

1. Nemat-Nasser, S., Guo, W., and Kihl, D. P., 2001, "Thermomechanical Response of AL6XN Stainless Steel Over a Wide Range of Strain Rates and Temperatures," J. Mech. Phys. Solids, 49, pp. 1823-1846.
2. Huang, Y. L., Oguocha, I. N. A., and Yannacopoulos, S., 2005, "The Corrosion Wear Behavior of Selected Stainless Steels in Potash Brine," Wear, 258, pp. 1357-1363.
3. Anderko, A., Sridhar, N., Yang, L., Grise, S. L., Saldanha, B. J., and Dorsey, M. H., 2005, "Validation of Localized Corrosion Model Using Real Time Corrosion Monitoring in a Chemical Plant," Corros. Eng., Sci. Tech., 40(1), pp. 33-42.
4. Zhang, L., Han, E., Zhang, Z., Guan, H., and Ke, W., 2003, "The Corrosion of Stainless Steel and Nickel Base Alloys in Subcritical Water Condition," Acta Metall. Sin., 39(6), pp. 649-654.
5. Lewis, A. C., Bingert, J. F., Rowenhorst, D. J., Gupta, A., Geltmacher, A. B., and Spanos, G., 2006, "Two-and Three-Dimensional Microstructural Characterization of a Super-Austenitic Stainless Steel," Mater. Sci. Eng., A, 418, pp. 11-18.
6. Stauffer, A. C., Koss, D. A., and McKirgan, J. B., 2004, "Microstructural Banding and Failure of a Stainless Steel," Metall. Mater. Trans. A, 35(4), pp. 1317-1324.
7. Kusko, C. S., Dupont, J. N., and Marder, A. R., 2004, "The Influence of Microstructure on Fatigue Crack Propagation Behaviour of Stainless Steel Welds," Weld. J. (Miami, FL, U.S.), 83(1), pp. 6s-14s.
8. Metrovich, B., Fisher, J. W., Yen, B. T., Kaufmann, E. J., Cheng, X., and Ma, Z., 2003, "Fatigue Strength of Welded AL-6XN Superaustenitic Stainless Steel," Int. J. Fatigue, 25(9-11), pp. 1309-1315.
9. Guo, W., 2006, "Plastic Flow Stresses and Constitutive Models of Four Newer Naval Vessel Steels," Acta Metall. Sin., 42(5), pp. 463-468.
10. Dawson, P. R., Boyce, D. E., Hale, R., and Durkot, J. P., 2005, "An Isoparametric Piecewise Representation of the Anisotropic Strength of Polycrystalline Solids," Int. J. Plast., 21(2), pp. 251-283.
11. Abed, F. H., and Voyiadjis, G. Z., 2005, "Plastic Deformation Modeling of AL-6XN Stainless Steel at low and High Strain Rates and Temperatures Using a Combination of bcc and fcc Mechanisms of Metals," Int. J. Plast., 21(8), pp. 1618-1639.
12. Nadai, A., 1950, Theory of Flow and Fracture of Solids, 2nd ed., McGraw-Hill Book Company, New York, Vol. 1, pp 347-353.
13. Jiang, Y., and Kurath, P., 1997, "Non-Proportional Cyclic Deformation: Critical Experiments and Analytical Modeling," Int. J. Plast., 13, pp. 743-763.
14. Krupp, U., Christ, H. J., Lezuo, P., Maier, H. J., and Teteruk, R. G., 2001, "Influence of Carbon Concentration on Martensitic Transformation in Metastable Austenitic Steels Under Cyclic Loading Conditions," Mater. Sci. Eng., A, 319-321, pp. 527-530.
15. Smith, K. N., Watson, P., and Topper, T. H., 1970, "A Stress Strain Function for the Fatigue of Metals," J. Mater., 5, pp. 767-778.
16. Socie, D. F., 1987, "Multiaxial Fatigue Damage Models," ASME J. Eng. Mater. Technol., 109, pp. 293-298.
17. Fatemi, A., and Socie, D. F., 1988, "A Critical Plane Approach to Multiaxial Fatigue Damage Including out of Phase Loading," Fatigue Fract Eng. Mater. Struct., 11, pp. 149-165.
18. Fatemi, A., and Kurath, P., 1988, "Multiaxial Fatigue Life Predictions under the Influence of Mean Stress," ASME J. Eng. Mater. Technol., 110, pp. 380-388.
19. Jiang, Y., 2000, "A Fatigue Criterion for General Multiaxial Loading," Fatigue Fract. Eng. Mater. Struct., 23, pp. 19-32.
20. Hua, C. T., and Socie, D. F., 1984, "Fatigue Damage in 1045 Steel Under Constant Amplitude Biaxial Loading," Fatigue Engng. Mater. Struct., 7(3), pp. 165-179.
21. Socie, D. F., and Bannantine, J., 1987, "Bulk Deformation Fatigue Damage Models," Mater. Sci. Eng., A103, pp. 3-13.
22. Jha, S. K., Larsen, J. M., Rosenberg, A. H., and Hartman, G. A., 2003, "Dual Fatigue Failure Modes in Ti-6Al-2Sn-4Zr-6Mo and Consequences on Probabilistic Life Prediction," Scr. Mater., 48, pp. 1637-1642.
23. Zhao, T., and Jiang, Y., 2008, "Fatigue of 7075-T651 Aluminum Alloy," Int. J. Fatigue, 30, pp. 834-849.
24. Jiang, Y., Hertel, O., Hoffmeyer, J., and Vormwald, M., 2007, "An Experimental Evaluation of Three Critical Plane Multiaxial Fatigue Criteria," Int. J. Fatigue, 29, pp. 1490-1502.
25. Gao, Z., Zhao, T., Wang, X., and Jiang, Y., 2007, "Multiaxial Fatigue of 16MnR Steel," ASME J Pressure Vessel Technol., in press.