Materials challenges for solid-oxide fuel cells

JOM

Volumn 59, Issue 12, 2007, Pages 56-62

  Fergus, Jeffrey W ^a  

^a AUBURN UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIRECT ENERGY CONVERSION; ELECTRIC BATTERIES; ELECTROCHEMISTRY; ENERGY CONVERSION; FUEL CELLS; FUELS; SOLID ELECTROLYTES;

COMPATIBILITY ISSUES; ELECTROLYTE MATERIALS; HIGH OPERATING TEMPERATURE (HOT); HIGH TEMPERATURE (HT); INTERMEDIATE TEMPERATURES; OPERATING TEMPERATURES; SOLID-OXIDE FUEL CELLS (SOFC);

SOLID OXIDE FUEL CELLS (SOFC);

EID: 47649085509     PISSN: 10474838     EISSN: 15431851     Source Type: Journal    
DOI: 10.1007/s11837-007-0153-x     Document Type: Review

References (139)

1. M.A.J. Cropper, S. Geiger, and O.M. Jollie, J. Power Sources, 131 (1-2) (2004), pp. 57-61.
2. P. Singh and N.Q. Minh, Int. J. Appl. Ceram. Tech., 1 (1) (2004), pp. 5-15.
3. M.C. Williams, Fuel Cells (Weinheim), 7 (1) (2007), pp. 78-85.
4. S.C. Singhal, Solid State Ionics, 152-153 (December 2003), pp. 405-410.
5. P. Lamp et al., Fuel Cells, 3 (3) (2003), pp. 146-152.
6. J.L. Hertz and H.L. Tuller, J. Electrochem. Soc., 154 (4) (2007), pp. B413-B418.
7. G.J. La O' et al., Int. J. Energy Research, 31 (2007), pp. 548-575.
8. B.E. Buergler et al., J. Pow Sources, 171 (2) (2007) pp. 310-320.
9. M.C. Williams, J.P. Strakey, and W.A. Surdoval, Int. J. Appl. Ceram. Tech., 2 (4) (2005), pp. 295-300.
10. H. Tu and U. Stimming, J. Power Sources, 127 (1-2) (2004), pp. 284-293.
11. K. Sasaki et al., J. Electroceramics, 13 (1-3) (2004), pp. 669-675.
12. N.J.J. Dekker and G. Rietveld, J. Fuel Cell Sci. Technol., 3 (4) (2006), pp. 499-502.
13. M. Kawano et al., J. Electrochem. Soc., 154 (5) (2007), pp. B460-B465.
14. Z.F. Zhou et al., J. Power Sources, 133 (2) (2004), pp. 181-187.
15. Z.F. Zhou et al., J. Power Sources, 171 (2) (2007) pp. 856-860.
16. W. Jamsak et al., ECS Trans., 7 (1) (2007), pp. 1475-1482.
17. D.L. Cresswell and I.S. Metcalfe, Solid State Ionics, 177 (19-25) (2006), pp. 1905-1910.
18. N. Autissler et al., J. Fuel Cell Sci. Tech., 4 (1) (2007), pp. 123-129.
19. G. Słowiński, Int J. Hydrogen Energy, 31 (2006), pp. 1091-1102.
20. B.C.H. Steele, J. Mater. Sci., 36 (5) (2001). pp. 1053-1068.
21. S. Hui et al., J. Power Sources, 171 (2) (2007) pp. 493-502.
22. J.W. Fergus, J. Power Sources, 162 (1-2) (2006), pp. 30-40.
23. V.V. Kharton, F.M.B. Marques, and A. Atkinson, Solid State Ionics, 174 (1-4) (2004), pp. 135-149.
24. S. Sarat, N. Sammes, and A. Smimova, J. Power Sources, 160 (2) (2006), pp. 892-896.
25. B. Dalslet et al., J. Solid State Electrochem., 10 (8) (2006), pp. 547-561.
26. S. Kuharuangrong, J. Power Sources, 171 (2) (2007) pp. 506-510.
27. A.V. Joshl et al., J. Electroceram., 13 (1-3) (2004), pp. 619-625.
28. J.W. Stevenson et al., J. Electrochem. Soc., 147 (9) (2000), pp. 3213-3218.
29. B.A. Khorkounov, H. Näfe, and F. Aldinger, J. Solid State Electrochem., 10 (7) (2006), pp. 479-487.
30. T. Schober, Solid State Ionics, 162-163 (September 2003), pp. 277-281.
31. S.R Jiang and S.H. Chan, J. Mater. Sci., 39 (14) (2004), pp. 4405-4439.
32. A. McEvoy, High Temperature Solid Oxide Fuel Cells, ed. S.C. Singhal and K. Kendall (Oxford, U.K.: Elsevier Ltd., 2003), pp. 149-171.
33. A. Atkinson et al., Nature Materials, 3 (1) (2004), pp. 17-27.
34. C. Sun and U. Slimming, J. Power Sources, 171 (2) (2007), pp. 247-260.
35. P.M. Delaforce et al., J. Am. Ceram. Soc., 90 (3) (2007), pp. 918-924.
36. D. Sarantaridis and A. Atkinson, Fuel Cells (Weinheim), 7(3) (2007), pp. 246-258.
37. T. Klemensø et al., J. Electrochem. Soc., 152 (11) (2005), pp. A2186-A2192.
38. N.M. Tikekar, T.J. Armstrong, and A.V. Virkar, J. Electrochem. Soc., 153 (4) (2006), pp. A654-A653.
39. S.. McIntosh, M.J. Vohs, and R.J. Gorte, J. Electrochem. Soc., 150 (4) (2003), pp. A470-A476.
40. M. Gong et al., J. Power Sources, 168 (2) (2007), pp. 289-298.
41. Z. Chang and M. Liu, Solid State Ionics 178 (13-14) (2007), pp. 925-935.
42. Y.M. Choi et al., J. Alloys Comp., 427 (1-2) (2007), pp. 25-29.
43. H. Kurokawa et al., Electrochem. Solid-State Lett., 10 (9) (2007), pp. B135-B138.
44. T. Horita et al., Solid State Ionics, 177 (19-25) (2006), pp. 1941-1948.
45. S. Tao and J.T.S. Irvine, The Chemical Record, 4 (2) (2004), pp. 83-95.
46. J.W. Fergus, Solid State Ionics, 177 (17-18) (2006), pp. 1529-1541.
47. B.A. Boukamp, Nature Materials, 2 (5) (2003), pp. 294-296.
48. H. Kurokawa et al., J. Power Sources, 164 (2) (2007), pp. 510-518.
49. V. Vashook et al., Solid State Ionics, 175 (1-4) (2004), pp. 151-155.
50. F. Tietz, I.A. Rai, and D. Stöver, Brit. Ceram. Trans., 103 (5) (2004), pp. 202-210.
51. Y. Du and N.M. Sammes, Electrochem. Soc. Proc., 2005-07 (SOFC IX) (2005), pp. 1127-1136.
52. S. Hui and A. Petric, J. Eur. Ceram. Soc., 22 (9-10) (2002), pp. 1673-1681.
53. J.-H. Lee et al., J. Mater. Sci., 42 (6) (2007), pp. 1866-1871.
54. H. Yokokawa and T. Horita, High Temperature Solid Oxide Fuel Cells, ed. S.C. Singhal and K. Kendall (Oxford, U.K.: Elsevier Ltd., 2003), pp. 119-147.
55. L.J. Gauckler et al., Chimia, 58 (12) (2004), pp. 837-850.
56. G. Stochniol, E. Syskakis, and A. Naoumidis, J. Am. Ceram. Soc., 78 (4) (1995), pp. 929-932.
57. K. Kleveland et al., J. Am. Ceram. Soc., 82 (3) (1999), pp. 729-734.
58. A. Mitterdorfer and L.J. Gauckler, Solid State Ionics, 111 (3-4) (1998), pp. 185-218.
59. J.M. Ralph, C. Rossignol, and R. Kumar, J. Electrochem. Soc., 150 (11) (2003), pp. A1518-A1522.
60. A. Tsoga, A. Naoumidis, and D. Stöver, Solid State Ionics, 135 (1-4) (2000), pp. 403-409.
61. K. Huang et al., J. Electrochem. Soc., 143 (11) (1996), pp. 3630-3636.
62. W. Chen et al., Mater Res. Bull., 38 (8) (2003), pp. 1319-1328.
63. Z. Bi et al., J. Power Sources, 161 (1) (2006), pp. 34-39.
64. N. Sakai et al., J. Electrochem. Soc., 153 (3) (2006), pp. A621-A625.
65. C.N. Munnings et al., J. Fuel Cell Sci. Tech., 2 (1) (2005), pp. 34-37.
66. W.Z. Zhu and S.C. Deevi, Mater. Sci. Eng., A348 (1-2) (2002), pp. 227-243.
67. N.Q. Minh and T. Takahashi, Science and Technology of Ceramic Fuel Cells (Amsterdam: Elsevier, 1995), pp. 165-198.
68. N. Sakai et al., Int J. Appl. Ceram. Technol., 1 (1) (2004), pp. 23-30.
69. J.W. Fergus, Solid State Ionics, 171 (1-2) (2004), pp. 1-15.
70. R.D. Shannon, Acta Cryst, A 32 (5) (1976), pp. 751-767.
71. X. Zhou et al., J. Power Sources, 164 (1) (2007), pp. 293-299.
72. W. Huang and S. Gopalan, J. Power Sources, 154 (1) (2006), pp. 180-183.
73. W.J. Quadakkers et al., Materials at High Temperatures, 20 (2) (2003), pp. 115-127.
74. J.W. Fergus, Mater Sci. Eng. A, 397 (1-2) (2005), pp. 271-283.
75. Z. Yang at al., J. Electrochem. Soc., 150 (9) (2003), pp. A1188-A1201.
76. T. Uehara et al., Solid Oxide Fuel Cells VIII - Electrochem. Soc. Proc., PV 2003-07, ed. S.C. Singhal and M. Dokiya (Pennington, NJ: The Electrochemical Society, 2003), pp. 914-922.
77. M. Ueda and H. Taimatsu, European Solid Oxide Fuel Cell Forum Proceedings, Vol. 2, ed. A.J. McEvoy (Lucerne, Switzerland: The European Fuel Cell Forum, 2000), pp. 837-843.
78. J. Pirón-Abbellán et al., Solid Oxide Fuel Calls VII - Electrochem. Soc. Proc., PV 2001-16, ed. H. Yokokawa and S.C. Singhal (Pennington, NJ: The Electrochemical Society, 2001), pp. 811-819.
79. H. Hayashi et al., Solid State Ionics, 176 (2007), pp. 613-619.
80. S. Linderoth et al., J. Mater. Sci., 31 (19) (1996), pp. 5077-5082.
81. W. Glatz et al., European Solid Oxide Fuel Cell Forum Proceedings, Vol. 2, ed. A.J. McEvoy (Lucerne, Switzerland: The European Fuel Cell Forum, 2000), pp. 855-864.
82. M. Stanislowski et al., J. Power Sources, 164 (2) (2007), pp. 578-589.
83. H. Kurokawa, K. Kawamura, and T. Maruyama, Solid State Ionics, 168 (1-2) (2004), pp. 13-21.
84. Z. Yang et al., J. Electrochem. Soc., 151 (12) (2004), pp. B669-B678.
85. T. Horita et al., J. Power Sources, 118 (1-2) (2003), pp. 35-43.
86. P. Huczkowski et al., J. Fuel Cell Sci. Tech., 1 (2004), pp. 30-34.
87. E.J. Opila et al., J. Phys. Chem. A, 111 (10) (2007), pp. 1971-1980.
88. C. Gindorf, L. Singheiser, and K. Hilpert, Steel Research, 72 (11/ 12) (2001), pp. 528-533.
89. B.B. Ebbinghaus, Combustion Flame, 93 (1-2) (1993), pp. 119-137.
90. J.W. Fergus, Int. J. Hydrogen Energy, 32 (16) (2007) pp. 3664-3671.
91. S. Geng and J. Zhu, J. Flower Sources, 160 (2) (2006), pp. 1009-1016.
92. M. Stanislowski et al., J. Electrochem. Soc., 154 (4) (2007), pp. A295-A306.
93. J.E. Hammer et al., Oxidation of Metals, 67 (1-2) (2007), pp. 1-38.
94. K. Fujita et al., J. Power Sources, 131 (1-2) (2004) 270-27.
95. Y.D. Zhen et al., J. Eur. Ceram. Soc., 26 (15) (2006), pp. 3253-3264.
96. Z. Yang, G. Xia, and J.W. Stevenson, Ceram. Eng. Sci. Proc., 26 (4) (2005), pp. 217-224.
97. M.C. Tucker et al., J. Power Sources, 160 (1) (2006), pp, 130-138.
98. W. Qu et al., J. Power Sources, 153 (1) (2006), pp. 114-124.
99. N. Sakai et al., Solid State Ionics, 177 (19-25) (2006), pp. 1933-1939.
100. S. Geng et al., J. Power Sources, 171 (2) (2007) pp. 775-781.
101. M.P. Brady et al., Oxidation of Metals, 65 (3-4) (2006), pp. 237-261.
102. H. Kurokawa et al., Solid State Ionics, 178 (3-4) (2007), pp. 287-296.
103. I. Belogolovsky et al., J. Electrochem. Soc., 154 (9) (2007), pp. B987-B980.
104. A. Petric and H. Ling, J. Am. Ceram. Soc., 190 (5) (2007), pp. 1515-1520.
105. A.N. Hansson et al., Oxidation of Metals, 68 (1-2) (2007), pp. 23-36.
106. Z. Yang et al., Int J. Hydrogen Energy, (16) (2007) pp. 3548-3654.
107. Z. Yang et al., Surf. Coating Tech., 201 (7) (2006), pp. 4476-4483.
108. P.A. Lessing, J. Mater Sci., 42 (10) (2007), pp. 3465-3476.
109. J.W. Fergus, J. Power Sources, 147 (1-2) (2005), pp. 46-57.
110. R.N. Singh, Ceram. Eng. Sci. Proc., 25 (3) (2004), pp. 299-307.
111. C. Lara, M.J. Pascual, and A. Duran, J. Non-Crystalline Solids, 348 (15) (November 2004), pp. 149-155.
112. S.-B. Sohn et al., J. Am. Ceram. Soc., 87 (2) (2004), pp. 254-260.
113. R. Zheng et al., J. Power Sources,128 (2) (2004), pp. 165-172.
114. C. Lara et al., Solid State Ionics, 170 (3-4) (2004), pp. 201-208.
115. F. Smeacetto et al., J. Eur. Ceram. Soc. 28 (1) 61-68.
116. M.J. Pascual, A. Guillet, and A. Durán, J. Power Sources, 169 (1) (2007), pp. 40-46.
117. C.A. Lewinsohn, M.A. Wilson, and D.M. Taylor, Proc. Electrochem. Soc., 2003-23-Soild-State Ionic Devices III (2003), pp. 346-371.
118. A. Flügell et al., J. Electrochem. Soc., 154 (6) (2007), pp. B601 -B608.
119. D. Behadur et al., J. Electrochem. Soc., 151 (4) (2004), pp. A558-A562.
120. Y.-S. Chou, J.W. Stevenson, and P. Singh, J. Electrochem. Soc., 154 (7) (2007), pp. B644-B651.
121. M.D. Dolan and S.T Misture, J. Electrochem. Soc., 154 (7) (2007), pp. B700-B711.
122. Y.-S. Chou and J.W. Stevenson, J. Power Sources, 168 (2) (2007), pp. 426-433.
123. K.A. Nielsen et al., Ceram. Eng. Sci, Proc.; 25 (3) (2004), pp. 309-314.
124. M. Brochu et al., J. Eur. Ceram. Soc., 26 (15) (2006), pp. 3307-3313.
125. M. Brochu et al., J. Am. Ceram. Soc., 89 (3) (2006), pp. 810-816
126. S.M. Gross et al., Fuel Cells Bull., 2006 (9) (2006), pp. 12-15.
127. S.R. Choi, N.P. Bansal,and A. Garg, Mater Sci. Eng. A, 460-461 (15) (July 2007), pp. 509-515.
128. P. Batfalsky et al., J. Power Sources, 155 (2) (2006), pp. 1128-1137.
129. V.A.C. Haanappel et al., J. Mater Sci., 40 (7) (2005), pp. 1583-1592.
130. M. Singh, T.P. Shpargel, and R Asthana, Int. J. Appl. Ceram. Technol., 4 (2) (2007), pp. 119-133.
131. J.Y. Kim, J.S. Hardy, and S. Weil, Int, J. Hydrogen Energy (16) (2007) pp. 3754-3762.
132. J.Y. Kim, J.S. Hardy, and K.S. Weil, J. Am. Ceram. Soc., 88 (9) (2005), pp. 2521-2527.
133. M.C. Tucker et al., J. Power Sources, 160 (2) (2006), pp. 1049-1057.
134. J. Duquette and A. Petric, J Power Sources, 137 (1) (2004), pp. 71-75.
135. P. Singh et al., J. Mater. Eng. Perf., 13 (3) (2003), pp. 287-294.
136. Y.-S. Chou et al., J. Electrochem. Soc., 153 (8) (2006), pp, A1591-A1598.
137. Y.-S. Chou et al., J. Power Sources, 160 (2) (2006), pp, 115-122.
138. S. Le et al., J. Power Sources, 168 (2) (2007), pp. 447-452.
139. F. Wiener et al., J. Mater. Sci., 42 (8) (2007), pp. 2643-2651.