Cohesive zone simulations of crack growth along a rough interface between two elastic-plastic solids

Engineering Fracture Mechanics

Volumn 75, Issue 15, 2008, Pages 4309-4332

  Zavattieri, Pablo D ^a   Hector Jr , Louis G ^a   Bower, Allan F ^b  

^a GENERAL MOTORS CORPORATION   (United States)

^b Brown University   (United States)

Author keywords

Cohesive zone model; Finite element analysis; Interface fracture; Sinusoidal interface

Indexed keywords

BRITTLE FRACTURE; CONSTITUTIVE MODELS; CRACK PROPAGATION; CRACKING (CHEMICAL); DIMENSIONAL STABILITY; DUCTILE FRACTURE; ELASTOPLASTICITY; FINITE ELEMENT METHOD; FLUID MECHANICS; FORECASTING; FRACTURE FIXATION; GEOMETRY; PARAMETER ESTIMATION; PLASTICS; PRESSURE DROP; SOLIDS;

COHESIVE INTERFACE; COHESIVE PARAMETERS; COHESIVE PROPERTIES; COHESIVE ZONE (CZ); CONTINUUM ELASTIC; CRACK BLUNTING; CRACK GROWTH; CRITICAL PARAMETERS; ELASTIC PLASTIC; ELASTIC PLASTIC SOLIDS; ELSEVIER (CO); FINITE ELEMENT MESHING; FRACTURE BEHAVIORS; GEOMETRIC PARAMETERS; GRIT BLASTING; IDENTICAL MATERIALS; INITIATION (ELECTRIC DISCHARGES); INTERFACE CRACKS; INTERFACE MORPHOLOGIES; INTERFACE TOPOGRAPHY; MACROSCOPIC TOUGHNESS; MATERIAL MODELLING; PRACTICAL DESIGNS; ROUGH INTERFACES; SEMI INFINITE; SMALL BODIES; SURFACE FINISHING;

ASPECT RATIO;

EID: 47549089752     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2007.11.007     Document Type: Article

References (44)

1. Garnish E.W., and Haskins G.C. In: Alner D.J. (Ed). Aspects of adhesion vol. 5 (1969), University London Press Ltd. 259
2. Sancaktar E., and Zhang E. Laser ablation of aluminum and titanium surfaces for improved adhesion. In: Sancaktar E., and Lee J.S. (Eds). Reliability stress analysis and failure prevention aspects of composite and active materials, ASME DE vol. 79 (1994), American Society of Mechanical Engineers, New York, NY 65
3. Sancaktar E., and Gomatam R. A study on the effects of surface roughness on the strength of single lap joints. J Adhesion Sci Technol 15 (2001) 97-117
4. Jennings C.W. Surface roughness and bond strength of adhesives. J Adhesion 4 (1972) 25-38
5. Mulville D.R., and Vaishnev R.N. Interfacial crack propagation. J Adhesion 7 (1975) 215
6. Stout K.J., Blunt L., Dong W.P., Mainsah W., Luo N., Mathia T., et al. Development of methods for the characterization of roughness in three dimensions (2000), Butterworth-Heineman, Burlington, MA
7. Hector Jr LG, Sheu S. Brightness enhancement with textured roll. US Patent No. 4,996,113, 1991.
8. Hector Jr LG, Sheu S. Enhanced work roll surface texture for cold and hot rolling of aluminum and its alloys. US Patent No. 5,508,119, 1996.
9. Sheu S, Hector Jr LG, Gorman Sr JM. Sheet product due to massive thickness reduction in last stand of cold rolling. US Patent No. 5,537,851, 1996.
10. Sheu S., Hector Jr. L.G., and Richmond O. Tool surface topographies for controlling friction and wear in metal-forming processes. ASME J Tribol 120 (1998) 517-527
11. Chandrasekhar S. Hydrodynamic and hydromagnetic stability (1961), Clarendon Press, Oxford
12. Ciamarra M.P., Coniglio A., and Nicodemi M. Shear instabilities in granular mixtures. Phys Rev Lett 94 (2005) 188001
13. Chen E.J., and Winn Z. Delaminating layered oxide composites with wavy interfaces. Z Metallkd 7 (2001) 757
14. Barthelat F., Tang H., Zavattieri P.D., Li C.-M., and Espinosa H.D. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J Mech Phys Solid 55 2 (2007) 306-337
15. Li J.H., Yamaguchi Y., Hashizume H., Usami N., and Shiraki Y. Wavy interface morphologies in strained Si1-xGex/Si multilayers on vicinal Si(111) substrates. J Phys: Condens Matter 10 (1998) 8643-8652
16. Asaro R.J., and Tiller W.A. Interface morphology development during stress corrosion cracking. I. Via surface diffusion. Metall Trans 3 (1972) 1789-1796
17. Mullins W., and Sekerka R.F. The stability of a planar interface during solidification of a dilute binary alloy. J Appl Phys 35 (1964) 444
18. Singh S., and Blazek K. Heat transfer and skin formation in a continuous casting mold as a function of steel carbon content. J Met 26 (1974) 17-27
19. Weirauch DA, Giron A. The early stages of aluminum solidification in the presence of a moving meniscus. In: Zabaras N, Becker R, Lalli L, Ghosh S, editors. Proceedings of the integration of material, process and product design - a conference dedicated to the 70th birthday of Owen Richmond. Rotterdam, The Netherlands: A.A. Balkema Publishers; 1998. p. 183.
20. Yigit F., and Hector Jr. L.G. Critical wavelengths for gap nucleation in solidification - Part I: theoretical methodology. ASME J Appl Mech 67 (2000) 66-76
21. Yigit F., and Hector Jr. L.G. Critical wavelengths for gap nucleation in solidification - Part II: results for selected mold-shell material combinations. ASME J Appl Mech 67 (2000) 77-86
22. Lu X., and Comninu M. The sinusoidal crack. Engng Fract Mech 34 (1989) 649-656
23. Yang L., and Qu J. Energy release rate for cracks on a non-planar interface. Key Engng Mater 121-122 (1996) 47-62
24. Cotterell B., and Rice J.R. Slightly curved or kinked cracks. Int J Fract 16 (1980) 155-169
25. Johnson K.L., Greenwood J.A., and Higginson J.G. The contact of elastic regular wavy surfaces. Int J Mech Sci 27 (1985) 383
26. Adams G.G. Adhesion at the wavy contact interface between two elastic bodies. ASME J Appl Mech 71 (2004) 851-856
27. Zavattieri P., Hector Jr. L.G., and Bower A.E. Determination of the effective mode-I toughness of a sinusoidal interface between two elastic solids. Int J Fract 145 3 (2007) 167-180
28. Anderson T.L. Fracture mechanics - fundamentals and applications (1995), CRC Press
29. Chandra N., Li H., Shet C., and Ghonem H. Some issues in the application of cohesive zone models for metal-ceramic interfaces. Int J Solid Struct 39 10 (2002) 2827-2855
30. Qi Y., and Hector Jr. L.G. Adhesion and adhesive transfer at aluminum/diamond interfaces: a first-principles study. Phys Rev B 69 (2004) 235401
31. Tijssens M.G.A., van der Giessen E., and Sluys L.J. Simulation of mode I crack growth in polymers by crazing. Int J Solid Struct 37 (2000) 7307-7327
32. Alfano G, Marfia S, Sacco E. Influence of water pressure on crack propagation in concrete dams. In: Neittaanmäki P, Rossi T, Majava K, Pironneau O, editors. Proceedings of the fourth European congress on computational methods in applied sciences and engineering. ECCOMAS2004. Jyväskylä, Finland; 2004.
33. Xu X.-P., and Needleman A. Numerical simulations of fast crack growth in brittle solids. J Mech Phys Solid 42 9 (1994) 1397-1434
34. van den Bosch M.J., Schreurs P.J.G., and Geers M.G.D. An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion. Engng Fract Mech 73 9 (2006) 1220-1234
35. Gao Y.F., and Bower A.F. A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces. Model Simul Mater Sci Engng 12 (2004) 453
36. ABAQUS, Version 6.4-1, HKS Inc., Providence, RI.
37. Buckingham E. On physically similar systems; illustrations of the use of dimensional equations. Phys Rev 4 (1914) 345-376
38. Rice J.R. The mechanics of earthquake rupture. In: Dziewonski A.M., and Boschi E. (Eds). Physics of the earth's interior (1980), Italian Physical Society and North-Holland 555-649
39. Irwin G.R. Analysis of stresses and strains near the end of a crack traversing a plate. ASME J Appl Mech 24 (1957) 361-364
40. Tvergaard V., and Hutchinson J.W. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. J Mech Phys Solid 40 (1992) 1377-1397
41. Tvergaard V., and Hutchinson J.W. The influence of plasticity on mixed mode interface toughness. J Mech Phys Solid 41 (1993) 1119-1135
42. Mediavilla J., Peerlings R.H.J., and Geers M.G.D. A robust and consistent remeshing-transfer operator for ductile fracture simulations. Comput Struct 84 8-9 (2006) 604-623
43. Li S.F., Liu W.K., Rosakis A.J., Belytschko T., and Hao W. Mesh-free Galerkin simulations of dynamic shear band propagation and failure mode transition. Int J Solid Struct 39 5 (2002) 1213-1240
44. Rice R, Drugan WJ, Sham T-L. Elastic-plastic analysis of growing cracks. In: Proceedings of fracture mechanics: 12th conference ASTM-STP-700; 1980. p. 189-221.