Diffraction measurements of residual macrostress and microstress using X-rays, synchrotron and neutrons

JSME International Journal, Series A: Solid Mechanics and Material Engineering

Volumn 47, Issue 3, 2004, Pages 252-263

  Tanaka, Keisuke ^a   Akiniwa, Yoshiaki ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

Ceramics; Composite materials; Experimental stress analysis; Neutron diffraction; Residual stress; Shot peening; Synchrotrn Radiation; Thin films; Welded joint; X ray diffraction

Indexed keywords

JOINTS (STRUCTURAL COMPONENTS); SINGLE CRYSTALS; SYNCHROTRONS; WELDING; X RAY DIFFRACTION ANALYSIS;

RESIDUAL MACROSTRESS; SUBSURFACE STRESSES;

RESIDUAL STRESSES;

STRESS;

EID: 4744373448     PISSN: 13447912     EISSN: None     Source Type: Journal    
DOI: 10.1299/jsmea.47.252     Document Type: Article

References (39)

1. The Soci. Mater. Sci., Japan, Standard Method for X-Ray Stress Measurement - Steels - , JSMS-SD5-02, (in Japanese), (2002), The Soci. Mater. Sci., Kyoto, Japan.
2. The Soci. Mater. Sci., Japan, Standard Method for X-Ray Stress Measurement - Ceramic Materials - , JSMS-SD1-00, (in Japanese), (2000), The Soci. Mater. Sci., Kyoto, Japan.
3. Tanaka, K., Akiniwa, Y. and Hayashi, M., Neutron Diffraction Measurements of Residual Stresses in Engineering Materials and Composites, Mater. Sci. Res. Intern., Vol. 8, No. 4 (2002), pp. 165-174.
4. Pintschovius, L., Neutron Diffraction Using a Constant Wavelength, "Analysis of Residual Stress by Diffraction Using Neutron and Synchrotron Radiation", edited by Fitzpatrick, M. E. and Lodini, A., (2003), pp. 133-145, Taylor & Francis, London and New York.
5. Ohya, S., Nagahama, T., Kojima, R. and Hagihara, Y., Measurements for Actual Stress Distribution by Using X-Ray Diffraction during Rotary Bending Fatigue Test, Mater. Sci. Res. Intern, Vol. 6, No. 4 (2000), pp. 263-268.
6. Hayashi, M., Ohkido, M., Minakawa, N. and Morii, Y., Development of Residual Stress Measurement Apparatus by Neutron Diffraction and Its Application to Bent Carbon Steel, J. Soci. Mater. Sci., Japan, (in Japanese), Vol. 47, No. 4 (1998), pp. 420-426.
7. ISO Technol. Trends Assessment, Standard Test Method for Determining Residual Stress by Neutron Diffraction, ISO/TTA3, (2001).
8. Tanaka, K. and Akiniwa, Y., Microstress and Macrostress, J. Mater. Sci., Japan, (in Japanese), Vol. 47, No. 12 (1998), pp. 1301-1307.
9. Kroner, E., Berechnung der Elastschen Konstanten des Vielkristalls aus den Konstanten des Einkristalls, Z. Physik, Vol. 151 (1958), pp. 504-518.
10. Reuss, A., Berechnung der Fliessgrenze von Mischkristallen auf Grand der Plastizitatsbedingung fur Einkristalle, Z. Ang. Math. Mech., Vol. 9 (1929), pp. 49-58.
11. Voigt, W., Lehrbuch der Kristalphysik, (1928), p. 962, Teubner, Berlin.
12. Mura, T., Miscomechanics of Defects in Solids, (1991), p. 430, Kluwer Academic Publ., Dordrecht.
13. Eshelby, J.D., The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. Roy. Sci., Ser. A, Vol. 241 (1957), pp. 376-396.
14. Tanaka, K., Akiniwa, Y. and Ito, T., Porosity Effect on X-Ray Elastic Constants of Sintered Ceramics, Mater. Sci. Res., Intern., Vol.6, No. 1 (2000), pp. 49-54.
15. Tanaka, K., Suzuki, K., Sakaida, Y., Kimachi, H. and Akiniwa, Y., Single Crystal Elastic Constants of β-Silicon Nitride Determined by X-Ray Powder Diffraction, Mater. Sci. Res. Intern., Vol. 6, No. 4 (2000), pp. 249-254.
16. Hanabusa, T., X-Ray Measurements of Stresses in Deposited Thin Film with Fiber Texture, Mater. Sci. Res., Intern., Vol. 5, No. 2 (2000), pp. 63-73.
17. Tanaka, K., Ito, T., Akiniwa, Y. and Ohta, H., In-Situ Stress Measurement for the Fiber Textured Copper Films during Thermal Treatment, Rep. Res. Committee, P-SC327, JSME, (in Japanese), (2003), pp. 41-46.
18. Tanaka, K., Akiniwa, Y., Inoue, K. and Ohta, H., X-Ray Measurement of Residual Stress in Patterned Aluminum Thin Films Sputtered on Silicon Wafers, JSME Int. J., Ser. A, Vol. 41, No. 2 (1998), pp. 290-296.
19. Ito, T., Tanaka, K., Akiniwa, Y., Ishii, T. and Miki, Y., X-Ray Study of Mechanical Properties of TiN Thin Films Coated on Steel by Ion Beam Mixing Method, JSME Int. J., Ser. A, Vol., No. 1 (2003), pp. 86-92.
20. Akiniwa, Y., Tanaka, K., Suzuki, K., Yanase, E., Nishio, K., Kusumi, Y., Okado, H. and Arai, K., Evaluation of Residual Stress Distribution in Shot-Peened Steel by Synchrotron Radiation, J. Mater. Sci., Japan, (in Japanese), Vol. 52, No. 7 (2003), pp. 764-769.
21. Tanaka, K., Akiniwa, Y. and Morishita, Y., Unpublished.
22. Yanase, E., Nishio, K., Kusumi, Y., Arai, K., Akiniwa, Y. and Tanaka, K., A Constant Incidence Angle Method to Estimate the Subsurface Distribution of Residual Stress by High-Energy X-Rays from Synchrotron Radiation Source, J. Mater. Sci., Japan, (in Japanese), Vol. 51, No. 12 (2002), pp. 1429-1435.
23. Genzel, C., A Self-Consistent Method for X-Ray Diffraction Analysis of Multiaxial Residual-Stress Fields in the Near-Surface Region of Polycrystalline Materials. I. Theoretical Concept, J. Appl. Cryst., Vol. 32 (1999), pp. 770-778.
24. Doerner, M.F. and Brennan, S., Strain Distribution in Thin Aluminum Films Using X-Ray Depth Profiling, J. Appl. Phys., Vol. 63, No. 1 (1988), pp. 126-131.
25. Suzuki, K. and Tanaka, K., Applications of High-Energy X-Rays to Stress Measurements of Thermal Barrier Coatings, Texture and Microstructure, Vol. 35, No. 3/4 (2003), pp. 207-217.
26. Taira, S., Tanaka, K. and Yamasaki, T., A Method of Microbeam X-Ray Stress Measurement and Its Application to Fatigue Crack Propagation, J. Mater. Sci., Japan, (in Japanese), Vol. 27, No. 282 (1978), pp. 251-256.
27. Sasaki, T. and Hirose, Y., Single Incidence X-Ray Stress Measurement for All Plane Stress Components Using Imaging Plate of Two-Dimensional X-Ray Detector, J. Mater. Sci., Japan, (in Japanese), Vol. 44, No. 504 (1995), pp. 1139-1143.
28. f, Acta Mat., Vol. 50, Issue 10 (2002), pp. 2477-2490.
29. Preuss, M., Withers, P.J., Maire, E. and Buffiere, J.-Y., SiC Single Fiber Full-Fragmentation during Straining in a Ti-6Al-4V Matrix Studied by Synchrotron X-Rays, Acta Mat., Vol. 50, Issue 12 (2002), pp. 3175-3190.
30. Akiniwa, Y., Tanaka, K. and Kimura, K., Measurement of Stress Distribution near Notch in Ultra-Fine Grained Steel by Synchrotron Radiation, Proc. JSME Meeting, (in Japanese), No. 03-1, (2003), p. 239.
31. Newman, J.C., Jr., A Crack-Closure Model for Predicting Fatigue Crack Growth under Aircraft Spectrum Loading, ASTM STP 748, edited by Chang, J.B. and Hudson, C.M., (1981), pp. 53-84, American Society for Testing and Materials.
32. Suyama, Y., Ohya, S. and Yoshioka, Y., X-Ray Measurement of Stresses in a Crystal Grain by Position Sensitive Detector, J. Mater. Sci., Japan, (in Japanese), Vol. 48, No. 12 (1999), pp. 1437-1442.
33. Tanaka, K., Akiniwa, Y., Shimizu, K. and Shirakihara, K., A Method fo X-Ray Stress Measurement of Silicon Single Crystal, J. Mater. Sci., Japan, (in Japanese), Vol. 52, No. 10 (2003), pp. 1237-1244.
34. Suzuki, H., Akita, K. and Misawa, K., Residual Stress Measurements of Single Crystal-Estimation Method of Diffraction Angle in Stress-Free Condition, Proc. X-Ray Symp., JSMS, (in Japanese), Vol. 38 (2002), pp. 65-70.
35. Tanaka, K., Akiniwa, Y. and Mizuno, K., Unpublished.
36. Akiniwa, Y., Tanaka, K., Takezono, T., Hayashi, M., Minakawa, Y. and Morii, Y., Neutron and X-Ray Diffraction Measurements of Phase Stresses in SiC Particulate Reinforced Aluminum Composites, J. Mater. Sci., Japan, (in Japanese), Vol. 47, No. 7 (1998), pp. 755-761.
37. Mori, T. and Tanaka, K., Avearge Stress in Matrix and Average Energy of Materials with Misfitting Inclusions, Acta Metall, Vol. 21 (1973), pp. 571-574.
38. Akiniwa, Y., Tanaka, K., Minakawa, M. and Morii, Y., Neutron Diffraction Study of Thermal Residual Stress in Ceramic Composites, Mater. Sci. Res. Intern., Vol. 6, No. 4 (2000), pp. 281-286.
39. Hayashi, M., Ishiwata, M., Minakawa, N., Funahashi, S. and Root, J.H., Residual Stress Measurement in Socket Welded Joints by Neutron Diffraction, J. Soci. Mater. Sci., Japan, Vol. 44, No. 507 (1995), pp. 1464-1469.