A morphological study of filiform corrosive attack on cerated AA2024-T351 aluminium alloys

Corrosion Science

Volumn 47, Issue 1, 2005, Pages 107-124

  Hughes, A E ^a   Mol, J M C ^b,e   Hinton, B R W ^c   Van Der Zwaag, S ^d  

^a CSIRO   (Australia)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^c DEFENCE SCIENCE AND TECHNOLOGY ORGANISATION   (Australia)

^d DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^e TNO   (Netherlands)

Author keywords

A. Aluminium; A. Model; A. Organic coatings; A. Rare earth elements; B. SEM; C. Pitting corrosion

Indexed keywords

CORROSION; CORROSION PROTECTION; CRYSTAL MICROSTRUCTURE; DELAMINATION; ENERGY DISPERSIVE SPECTROSCOPY; ETCHING; GRAIN BOUNDARIES; IONS; SCANNING ELECTRON MICROSCOPY;

COATED SURFACES; FILIFORM CORROSIVE ATTACKS; GRAIN ETCH OUT; VOLUME EXPANSION;

ALUMINUM ALLOYS;

ALLOY; ALUMINUM; CORROSION RATE; MORPHOLOGY; PITTING CORROSION; RARE EARTH METAL;

EID: 4744365572     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2004.05.003     Document Type: Article

References (36)

1. A. Afseth, J.H. Nordlien, G.M. Scamans, K. Nisancioglu, Corros. Sci. 44 (11) (2002) 2529.
2. A. Afseth, J.H. Nordlien, G.M. Scamans, K. Nisancioglu, Corros. Sci. 44 (1) (2002) 145.
3. A. Afseth, J.H. Nordlien, G.M. Scamans, K. Nisancioglu, Corros. Sci. 43 (12) (2001) 2359.
4. A. Afseth, J.H. Nordlien, G.M. Scamans, K. Nisancioglu, Corros. Sci. 43 (11) (2001) 2093.
5. A. Afseth, PhD-thesis, Department of Electrochemistry of the Norwegian University of Science and Technology, Norway, 1999.
6. H. Leth-Olsen, K. Nisancioglu, Corros. Sci. 40 (7) (1998) 1179.
7. H. Leth-Olsen, A. Afseth, K. Nisancioglu, Corros. Sci. 40 (7) (1998) 1195.
8. H. Leth-Olsen, J.H. Nordlien, K. Nisancioglu, Corros. Sci. 40 (12) (1998) 2051.
9. H. Leth-Olsen, J.H. Nordlien, K. Nisancioglu, J. Electrochem. Soc. 144 (7) (1997) L196.
10. H. Leth-Olsen, K. Nisancioglu, Corrosion 53 (9) (1997) 705.
11. H. Leth-Olsen, PhD-thesis, Department of Electrochemistry of the Norwegian University of Science and Technology, Norway. 1996.
12. G.M. Scamans, M.P. Amor, B.R. Ellard, J.A. Hunter, in: Proceedings AlSST '97 Symposium, May 12-15, Antwerp, Belgium, 1997, p. 229.
13. M.H.M. Huisert, PhD-thesis, Laboratory of Materials Science of the Delft University of Technology, The Netherlands, 2001.
14. Y.W. Keuong, J.H. Nordlien, K. Nisancioglu, J. Electrochem. Soc. 148 (12) (2001) B497.
15. M.B. Spoelstra, PhD-thesis, Laboratory of Materials Science of the Delft University of Technology, The Netherlands, 2000.
16. R. Szymanski, D.N. Jamieson, A.E. Hughes, J.M.C. Mol, S. van der Zwaag, C.G. Ryan, Nuci. Instrum. Meth. B 190 (1-4) (2002) 365.
17. J.M.C. Mol, PhD-thesis, Laboratory of Materials Science of the Delft University of Technology, The Netherlands, 2000.
18. J.M.C. Mol, B.R.W. Hinton, D.H. van der Weijde, J.H.W, de Wit, S. van der Zwaag, J. Mater. Sci. 35 (7) (2000) 1629.
19. J.M.C. Mol, J.H.W. De Wit, S. van der Zwaag, J. Mater. Sci. 37 (13) (2002) 2755.
20. J.M.C. Mol, A.E. Hughes, B.R.W. Hinton, S. van der Zwaag, Corros. Sci. 46 (2004) 1201.
21. A.E. Hughes, S.G. Hardin, T.G. Harvey, T. Nikpour, B. Hinton, A. Galassi, G. McAdam, A. Stonham, S.J. Harris, S. Church, C. Figuregures, D. Dixon, C. Bowden, P. Morgan, S.K. Toh, D.D. McCulloch, J. DuPlessis, from Proceedings of the 3rd Aluminium Surface Science and Technology Conference in Bonn May 2003, ATB Metallurgie 43 (1,2) (2003) 459.
22. A.E. Hughes, J.M.C. Mol, S. van der Zwaag, in preparation.
23. K. Scheck, PhD-thesis, Institut für Technische Chemie der Universität Stuttgart, Germany, 1991.
24. W.H. Slabaugh, W. Dejager, S.E. Hoover, L.L. Hutchinson, J. Paint Technol. 44 (1972) 76.
25. B.R.W. Hinton, Corrosion prevention and chromates, the end of an era? Asia Pacific Interfinish 90, Singapore, 19-22 November 1990, Paper 30.
26. D.J. McCoy, in: Proc. 2nd AESF/EPA Chromium Colloquium Miami, Florida, 1990.
27. A.E. Hughes, K.J.H. Nelson, Interfinish 96, 14th World Congress, Birmingham, 12-14 September 1996, Proceedings vol. 2, Institute of Metal Finishing, p. 241.
28. A.E. Hughes, S.G. Hardin, K.W. Wittel, P.R. Miller, in: R.G. Buchheit, M.R. Jaworski, P.D. Chalmer (Eds.), Proceedings Corros./2000 Res. Top. Symp; Surface Conversions of Aluminium and Ferrous Alloys for Corrosion Resistance, NACE International, Houston, USA, 2000, p. 47.
29. A.E. Hughes, K.J.H. Nelson, T.W. Turney, Process and Solution for Providing a Conversion Coating on a Metal Surface, Australian Patent No 684,238.
30. S.G. Hardin, K.J.H. Nelson, K. Wittel, A.E. Hughes, Process and Solution for Providing a Conversion Coating on a Metallic Surface, PCT/AU01/00311.
31. L.F. Pease III, Powder metallurgy materials, in: Metals Handbook, nineth ed., vol. 9, Table 1, p. 508.
32. A.E. Hughes, J.D. Gorman, P.R. Miller, B.A. Sexton, P.J.K. Paterson, R.J. Taylor, Surf. Interf. Anal., submitted for publication.
33. A. Turnball, Br. Corros. J. 28 (4) (1993) 297.
34. V. Guillaumin, G. Mankowski, Corros. Sci. 41 (3) (1999) 421-438.
35. E.P. O'Brien, T.C. Ward, S. Guo, D.A. Dillard, J. Adhes. 79 (2003) 69-97.
36. J. Bouehet, A.A. Roche, El Jacquelin, J. Adhes. Sci. Technol. 12 (2002) 1603-1623.