Interface between turbulent flows above and within rough porous walls

Acta Geophysica

Volumn 56, Issue 3, 2008, Pages 824-844

  Pokrajac, Dubravka ^a   Manes, Costantino ^a,b  

^a UNIVERSITY OF ABERDEEN   (United Kingdom)

^b WSL INSTITUTE FOR SNOW AND AVALANCHE RESEARCH SLF   (Switzerland)

Author keywords

Double averaging methodology; Fluid porous interface; Momentum transfer; Stress jump condition; Turbulence in porous media

Indexed keywords

FISH; FLUID DYNAMICS; FLUID MECHANICS; LAMINAR FLOW; METALLURGY; MODELS; POROUS MATERIALS; SHEAR STRESS; SHEARING MACHINES; STRENGTH OF MATERIALS; THEOREM PROVING; TURBULENCE; TURBULENT FLOW; WALLS (STRUCTURAL PARTITIONS);

(ABIOTIC AND BIOTIC) STRESS; (I ,J) CONDITIONS; CONCEPTUAL MODELLING; HEIDELBERG (CO); IN ORDER; MACROSCOPIC FLOWS; MACROSCOPIC VARIABLES; PHYSICAL MEANINGS; POROUS MEDIUMS; POROUS WALLS; SIMULATION MODELLING; SINGLE DOMAINS; SPRINGER (CO); STEP CHANGES; STRESS CONDITIONS; TURBULENT BOUNDARY LAYER (TBL);

BOUNDARY CONDITIONS;

BED ROUGHNESS; BOUNDARY LAYER; CONCEPTUAL FRAMEWORK; LAMINAR FLOW; METHODOLOGY; PERMEABILITY; POROUS MEDIUM; SHEAR STRESS; TURBULENT FLOW;

EID: 47249148786     PISSN: 18956572     EISSN: 18957455     Source Type: Journal    
DOI: 10.2478/s11600-008-0022-1     Document Type: Article

References (48)

1. Alazmi, B., and K. Vafai (2001), Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer, Int. J. Heat Mass Transfer 44, 1735-1749.
2. Bear, J. (1979), Hydraulics of Groundwater, McGraw-Hill, New York.
3. Beavers, G.S., and D.D. Joseph (1967), Boundary conditions at a naturally permeable wall, J. Fluid Mechanics 30, 1, 197-207.
4. Breugem, W.P., and B.J. Boersma (2005), Direct numerical simulations of turbulent flow over a permeable wall using a direct and a continuum approach, Phys. Fluids 17, 1-15.
5. Brinkman, H.C. (1947), A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles, Appl. Scient. Res. A1, 27-34.
6. Cheng, P., and D. Vortmeyer (1988), Transverse thermal dispersion and wall channelling in a packed bed with forced convective flow, Chem. Eng. Sci. 43, 2523-2532.
7. de Lemos, M.J.S. (2005), Turbulent kinetic energy distribution across the interface between a porous medium and a clear region, Int. Comm. Heat Mass Transfer 32, 1-2, 107-115.
8. de Lemos, M.J.S., and R.A. Silva (2006), Turbulent flow over a layer of a highly permeable medium simulated with a diffusion-jump model for the interface, Int. J. Heat Mass Trans. 49, 3-4, 546-556.
9. Djenidi, L., R.A. Antonia, and F. Anselmet (1994), LDA measurements in a turbulent boundary layer over a d-type rough wall, Expts. Fluids 16, 323-329, DOI: 10.1007/BF00195431.
10. Dybbs, A., and R.V. Edwards (1984), A new look at porous media fluid mechanics - Darcy to turbulent. In: J. Bear and M.Y. Corapcioglu (eds.), Fundamentals of Transport Phenomena in Porous Media, Martinus Nijhoff, Amsterdam, 199-256.
11. Finnigan, J.J. (2000), Turbulence in plant canopies, Ann. Rev. Fluid Mech. 32, 519-571.
12. Gimenez-Curto, L.A., and M.A. Corniero Lera (1996), Oscillating turbulent flow over very rough surfaces, J. Geophys. Res. 101, 20745-20758.
13. Goharzadeh, A., A. Khalili, and B.B. Jørgensen (2005), Transition layer thickness at a fluid-porous interface, Phys. Fluids 17, 5, 057102-057102-10.
14. Goyeau, B., D. Lhuillier, D. Gobin, and M.G. Velarde (2003), Momentum transport at a fluid-porous interface, Int. J. Heat Mass Transfer 46, 21, 4071-4081
15. Gray, W.G., and P.C.Y. Lee (1977), On the theorems for local volume averaging of multiphase systems, Int. J. Multiphase Flow 3, 333-340.
16. James, D.F., and A.M. Davis (2001), Flow at the interface of a model fibrous porous medium, J. Fluid Mechanics 426, 47-72.
17. Jang, J.Y., and J.L. Chen (1992), Forced convection in a parallel plate channel partially filled with a high porosity medium, Int. Comm. Heat Mass Transfer 19, 263-273.
18. Kim, S.J., and C.Y. Choi (1996), Convection heat transfer in porous and overlying layers heated from below, Int. J. Heat Mass Transfer 39, 319-329.
19. Kuznetsov, A.V. (2004), Numerical modeling of turbulent flow in a composite porous/fluid duct utilizing a two-layer k-eps model to account for interface roughness, Int. J. Thermal Sci. 43, 11, 1047-1056.
20. Kuznetsov, A.V., and S.M. Becker (2004), Effect of the interface roughness on turbulent convective heat transfer in a composite porous/ fluid duct, Int. Comm. Heat Mass Transfer 31, 1, 11-20.
21. Kuznetsov, A.V., and M. Xiong (2003), Development of an engineering approach to computations of turbulent flows in composite porous/fluid domains, Int. J. Thermal Sci. 42, 913-919.
22. Larson, R.E., and J.J. Higdon (1986), Microscopic flow near the surface of two-dimensional porous media. Part 1: Axial flow, J. Fluid Mechanics 166, 449-472.
23. Lundgren T.S. (1972), Slow flow through stationary random beds and suspensions of spheres, J. Fluid Mechanics 51, 273-299.
24. Neale, G., and W. Nader (1974), Practical significance of Brinkamn's extension of Darcy's law: Coupled parallel flows within a channel and a bounding porous medium, Can. J. Chem. Eng. 52, 475-478.
25. Nikora, V., D. Goring, I. McEwan, and G. Griffiths (2001) Spatially-averaged open-channel flow over rough bed, J. Hydraul. Eng. ASCE 127, 2, 123-133.
26. Nikora, V, I. McEwan, S. McLean, S. Coleman, D. Pokrajac, and R. Walters (2007), Double averaging concept for rough-bed open-channel and overland flows: Theoretical background, J. Hydr. Eng. ASCE 133, 8, 873-883.
27. Ochoa-Tapia, A.J., and S. Whitaker (1995a), Momentum transfer at the boundary between a porous medium and a homogeneous fluid. I: Theoretical development, Int. J. Heat Mass Transfer 38, 14, 2635-2646.
28. Ochoa-Tapia, A.J., and S. Whitaker (1995b), Momentum transfer at the boundary between a porous medium and a homogeneous fluid. II: Comparison with experiment, Int. J. Heat Mass Transfer 38, 14, 2647-2655.
29. Ochoa-Tapia, J.A., and S. Whitaker (1998), Momentum jump condition at the boundary between a porous medium and a homogeneous fluid: Inertial effects, J. Porous Media 1, 201-217.
30. Pokrajac, D., C. Manes, and I. McEwan (2007), Peculiar mean velocity profiles within a porous bed of an open channel, Phys. Fluids 19, 9, 098109-1-098109-4
31. Poulikakos, D., and M. Kazmierczak (1987), Forced convection in a duct partially filled with a porous material, J. Heat Transfer 109, 653-662.
32. Prinos, P., D. Sofialidis, and E. Keramaris (2003), Turbulent flow over and within a porous bed, J. Hydr. Eng. ASCE 129, 9, 720-733.
33. Richardson, S.A. (1971), A model for the boundary condition of a porous material, Part 2, J. Fluid Mechanics 49, 327-336.
34. Ruff, J.F., and L.W. Gelhar (1972), Turbulent shear flow in porous boundary, J. Eng. Mech. Divis. 98, EM4, 975-991.
35. Sahraoui, M., and M. Kaviany (1992), Slip and no-slip velocity boundary conditions at the interface of porous, plain media, Int. J. Heat Mass Transfer 35, 927-943.
36. Sangani, A.S., and S. Behl (1989), The planar singular solutions of Stokes and Laplace equations and their application to transport processes near porous surfaces, Phys. Fluids A1, 21-37.
37. Shaffman, P.G. (1971), On the boundary condition at the surface of a porous medium, Stud. Appl. Math. L, 2, 93-101.
38. Shavit, U., G. Bar-Yosef, and R. Rosenzweig (2002), Modified Brinkman equation for a free flow problem at the interface of porous surfaces: The Cantor-Taylor brush configuration case, Water Resour. Res. 38, 12, 56-1-56-13.
39. Shimizu, Y., T. Tsujimoto, and H. Nakagawa (1990), Experiment and macroscopic modelling of flow in highly permeable porous medium under free-surface flow, J. Hydrosci. Hydraul. Eng. 8, 1, 69-78.
40. Silva R.A., and M.J.S. de Lemos (2003), Turbulent flow in a channel occupied by a porous layer considering the stress jump at the interface, Int. J. Heat Mass Transfer 46, 26, 5113-5121.
41. Stosser, T., and W Rodi (2004), LES of bar and rod roughened channel flow, Proc. 6 th Int. Conf. on Hydroscience and Engineering (ICHE-2004), May 30-June 3, Brisbane, Australia.
42. Taylor, G.I. (1971), A model for the boundary condition of a porous material, Part 1, J. Fluid Mechanics 49, 319-326.
43. Vafai, K. (1984), Convective flow and heat transfer in variable-porosity media, J. Fluid Mechanics 147, 233-259.
44. Vafai, K., and S.J. Kim (1990a), Fluid mechanics of the interface region between a porous medium and a fluid layer - an exact solution, Int. J. Heat Fluid Flow 11, 254-256.
45. Vafai, K., and S.J. Kim (1990b), Analysis of surface enhancement by a porous substrate, J. Heat Transfer 112, 700-706.
46. Vafai, K., and R. Thiyagaraja (1987), Analysis of flow and heat transfer at the interface region of a porous medium, Int. J. Heat Mass Transfer 30, 1391-1405.
47. Whitaker, S. (1999), The Method of Volume Averaging, Kluwer Academic Publishers, Dordrecht.
48. Wilson, N.R., and R.H. Shaw (1977), A higher order closure model for canopy flow, J. Appl. Meteorol. 16, 1197-1205.