메뉴 건너뛰기




Volumn 17, Issue 4, 2008, Pages 535-542

Investigations on heat treatment of a high-speed steel roll

Author keywords

Abrasion resistance; High carbon HSS roll; Mechanical property; Quenching temperature; Tempering temperature

Indexed keywords

(PL) PROPERTIES; ABRASION RESISTANCE; ASM INTERNATIONAL (CO); AUSTENITIZING TEMPERATURE; DIFFERENT MICROSTRUCTURES; ELONGATION PERCENTAGE; EUTECTIC CARBIDES; HIGH HARDNESS; HIGH SPEED STEEL (HSS); IMPACT TOUGHNESS; MARTENSITIC MATRIX; METALLIC MATRICES; QUENCHING AND TEMPERING; SODIUM SILICATE SOLUTIONS; STRENGTH (IGC: D5/D6); TEMPERING TEMPERATURES;

EID: 47249119753     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11665-007-9174-4     Document Type: Article
Times cited : (33)

References (42)
  • 1
    • 0036621733 scopus 로고    scopus 로고
    • Application of Simulated Annealing Algorithm to Improve Work Roll Wear Model in Plate Mill
    • Sun L., Zhang Q., Chen X., B. Wu, Z. Yu, L. Li (2002) Application of Simulated Annealing Algorithm to Improve Work Roll Wear Model in Plate Mill. J. Univ. Sci. Technol. Beijing 9: 224-227
    • (2002) J. Univ. Sci. Technol. Beijing , vol.9 , pp. 224-227
    • Sun, L.1    Zhang, Q.2    Chen, X.3    Wu, B.4    Yu, Z.5    Li, L.6
  • 2
    • 0036376069 scopus 로고    scopus 로고
    • Effect of the Number of Work-Roll Surface Division on Prediction of Contact Length in Coupled Analysis of Roll and Strip Deformation during Sheet Rolling
    • Furumoto H., Yamada K., Yanagimoto J. (2002) Effect of the Number of Work-Roll Surface Division on Prediction of Contact Length in Coupled Analysis of Roll and Strip Deformation During Sheet Rolling. ISIJ Int. 42: 736-743
    • (2002) ISIJ Int. , vol.42 , pp. 736-743
    • Furumoto, H.1    Yamada, K.2    Yanagimoto, J.3
  • 4
    • 0038107470 scopus 로고    scopus 로고
    • Improvement of Hot Wear Characteristic of High Speed Tool Steel Roll by Increase in Cr and Mo Contents
    • Ichino K., Ishikawa S., Kataoka Y., Toyooka T. (2003) Improvement of Hot Wear Characteristic of High Speed Tool Steel Roll by Increase in Cr and Mo Contents. J. Iron Steel Inst. Jpn. 89: 680-685
    • (2003) J. Iron Steel Inst. Jpn. , vol.89 , pp. 680-685
    • Ichino, K.1    Ishikawa, S.2    Kataoka, Y.3    Toyooka, T.4
  • 5
    • 10244255230 scopus 로고    scopus 로고
    • Introduction of Enhanced Indefinite Chill and High Speed Steel Rolls in European Hot Strip Mills
    • Andersson M., Finnstrom R., Nylen T. (2004) Introduction of Enhanced Indefinite Chill and High Speed Steel Rolls in European Hot Strip Mills. Ironmak. Steelmak. 31: 383-388
    • (2004) Ironmak. Steelmak. , vol.31 , pp. 383-388
    • Andersson, M.1    Finnstrom, R.2    Nylen, T.3
  • 6
    • 13944276350 scopus 로고    scopus 로고
    • Effects of Alloying Elements on Microstructure, Hardness, and Fracture Toughness of Centrifugally Cast High-Speed Steel Rolls
    • Kim C.K., Par J.I., Lee S., Chan K.Y., Kim N.J., Seung Y.J. (2005) Effects of Alloying Elements on Microstructure, Hardness, and Fracture Toughness of Centrifugally Cast High-Speed Steel Rolls. Metall. Mater. Trans. A 36: 87-97
    • (2005) Metall. Mater. Trans. A , vol.36 , pp. 87-97
    • Kim, C.K.1    Par, J.I.2    Lee, S.3    Chan, K.Y.4    Kim, N.J.5    Seung, Y.J.6
  • 7
    • 0031245106 scopus 로고    scopus 로고
    • Development of Centrifugal Cast Roll with High Wear Resistance for Finishing Stands of Hot Strip Mill
    • Ichino K., Kataoka Y., Koseki T. (1997) Development of Centrifugal Cast Roll with High Wear Resistance for Finishing Stands of Hot Strip Mill. Kawasaki Steel Tech. Rep. 37: 13-18
    • (1997) Kawasaki Steel Tech. Rep. , vol.37 , pp. 13-18
    • Ichino, K.1    Kataoka, Y.2    Koseki, T.3
  • 8
    • 0032279338 scopus 로고    scopus 로고
    • Research and Manufacture of Compound High Speed Steel Rolls
    • Gong K., Y. Dong, C. Gao (1998) Research and Manufacture of Compound High Speed Steel Rolls. Iron Steel (Peking) 33: 67-71
    • (1998) Iron Steel (Peking) , vol.33 , pp. 67-71
    • Gong, K.1    Dong, Y.2    Gao, C.3
  • 10
    • 0026971107 scopus 로고
    • Development of High-Performance Roll by Continuous Pouring Process for Cladding
    • Hashimoto M., Otomo S., Yoshida K. (1992) Development of High-Performance Roll by Continuous Pouring Process for Cladding, ISIJ Int. 32: 1202-1210
    • (1992) ISIJ Int. , vol.32 , pp. 1202-1210
    • Hashimoto, M.1    Otomo, S.2    Yoshida, K.3
  • 11
    • 0031365186 scopus 로고    scopus 로고
    • The application and performance of High-Speed-Steel (HSS) rolls at hot rolling
    • (Warrendale, PA), The Iron and Steel Society, Inc.
    • T. Tanaka, H. Takigawa, and M. Hashimoto, The Application and Performance of High-Speed-Steel (HSS) Rolls at Hot Rolling, Mechanical Working and Steel Processing Conference Proceedings (Warrendale, PA), The Iron and Steel Society, Inc., 1998, 35, p 435-444
    • (1998) Mechanical Working and Steel Processing Conference Proceedings , vol.35 , pp. 435-444
    • Tanaka, T.1    Takigawa, H.2    Hashimoto, M.3
  • 13
    • 7944231065 scopus 로고    scopus 로고
    • Microstructural Characteristics and Mechanical Properties of Spray Formed High Speed Steel for Work Roll
    • Zhou C.D., Fan J.F., Le H.R., Lin Y.J., Sun D.S., Zhang J.G. (2004) Microstructural Characteristics and Mechanical Properties of Spray Formed High Speed Steel for Work Roll Acta Metall. Sin. (English Lett.) 17: 548-553
    • (2004) Acta Metall. Sin. (English Lett.) , vol.17 , pp. 548-553
    • Zhou, C.D.1    Fan, J.F.2    Le, H.R.3    Lin, Y.J.4    Sun, D.S.5    Zhang, J.G.6
  • 14
    • 1642410897 scopus 로고    scopus 로고
    • Development of Centrifugal Casting High Speed Steel Rolls
    • Fu H., Zhao A., Xing J. (2003) Development of Centrifugal Casting High Speed Steel Rolls. J. Univ. Sci. Technol. Beijing 10: 61-66
    • (2003) J. Univ. Sci. Technol. Beijing , vol.10 , pp. 61-66
    • Fu, H.1    Zhao, A.2    Xing, J.3
  • 15
    • 19044380090 scopus 로고    scopus 로고
    • Development of Centrifugal Cast HSS Roll with Excellent Surface Deterioration Resistance in Hot Strip Mill
    • Ichino K. (2002) Development of Centrifugal Cast HSS Roll with Excellent Surface Deterioration Resistance in Hot Strip Mill CAMP-ISIJ 15: 995
    • (2002) CAMP-ISIJ , vol.15 , pp. 995
    • Ichino, K.1
  • 16
    • 14744286798 scopus 로고    scopus 로고
    • Centrifugal casting of HSS roll for narrow strip and rod mills
    • (Warrendale, PA), The Iron and Steel Society, Inc.
    • Z. Xin and M.C. Perks, Centrifugal Casting of HSS Roll for Narrow Strip and Rod Mills, 42nd Mechanical Working and Steel Processing Conference Proceedings (Warrendale, PA), The Iron and Steel Society, Inc., 2000, 38, p 183-191
    • (2000) 42nd Mechanical Working and Steel Processing Conference Proceedings , vol.38 , pp. 183-191
    • Xin, Z.1    Perks, M.C.2
  • 17
    • 33646516645 scopus 로고    scopus 로고
    • Comparative Investigation to Rolling Wear Properties between High-Vanadium High-Speed Steel and High-Chromium Cast Iron
    • Xu L., J. Xing, S. Wei, H. Chen, R. Long (2006) Comparative Investigation to Rolling Wear Properties Between High-Vanadium High-Speed Steel and High-Chromium Cast Iron J. Xi'an Jiaotong Univ. 40: 275-278
    • (2006) J. xi'An Jiaotong Univ. , vol.40 , pp. 275-278
    • Xu, L.1    Xing, J.2    Wei, S.3    Chen, H.4    Long, R.5
  • 18
    • 33645148626 scopus 로고    scopus 로고
    • Effects of Vanadium and Carbon on Microstructures and Abrasive Wear Resistance of high Speed Steel
    • Wei S., J. Zhu, L. Xu (2006) Effects of Vanadium and Carbon on Microstructures and Abrasive Wear Resistance of high Speed Steel. Tribol. Int. 39: 641-648
    • (2006) Tribol. Int. , vol.39 , pp. 641-648
    • Wei, S.1    Zhu, J.2    Xu, L.3
  • 19
    • 0033684668 scopus 로고    scopus 로고
    • Heat Treatment of High Carbon Vanadium High Speed Steel for Roller
    • Zhou H., J. Wang, Y. Su, J. Lian, Ogi K. (2000) Heat Treatment of High Carbon Vanadium High Speed Steel for Roller. Iron Steel (Peking) 35: 47-50
    • (2000) Iron Steel (Peking) , vol.35 , pp. 47-50
    • Zhou, H.1    Wang, J.2    Su, Y.3    Lian, J.4    Ogi, K.5
  • 21
    • 4344569441 scopus 로고    scopus 로고
    • High-Alloy High-Speed Steels for Rollers
    • Kuskov Yu M. (2004) High-Alloy High-Speed Steels for Rollers. Stal' 4: 43-48
    • (2004) Stal' , vol.4 , pp. 43-48
    • Kuskov Yu, M.1
  • 22
    • 33644842531 scopus 로고    scopus 로고
    • Effect of Laser Surface Modification on Microstructure and Hardness of High Speed Steel Roll
    • Tuo J., S. Chen, Z. Li, C. Liu, H. Li (2006) Effect of Laser Surface Modification on Microstructure and Hardness of High Speed Steel Roll. Heat Treat. Metals 31: 56-59
    • (2006) Heat Treat. Metals , vol.31 , pp. 56-59
    • Tuo, J.1    Chen, S.2    Li, Z.3    Liu, C.4    Li, H.5
  • 24
    • 17444445734 scopus 로고    scopus 로고
    • Effect of Heat Treatment on the Abrasion Resistance of Alloy White Irons
    • Tabret C.P., Sare I.R. (1997) Effect of Heat Treatment on the Abrasion Resistance of Alloy White Irons. Wear 203-204: 206-219
    • (1997) Wear , vol.203-204 , pp. 206-219
    • Tabret, C.P.1    Sare, I.R.2
  • 25
    • 0032058211 scopus 로고    scopus 로고
    • Effect of High Temperature and Sub-Ambient Treatments on the Matrix Structure and Abrasion Resistance of a High-Chromium White Iron
    • Tabrett C.P., Sare I.R. (1998) Effect of High Temperature and Sub-Ambient Treatments on the Matrix Structure and Abrasion Resistance of a High-Chromium White Iron. Scripta Mater. 38: 1747-1753
    • (1998) Scripta Mater. , vol.38 , pp. 1747-1753
    • Tabrett, C.P.1    Sare, I.R.2
  • 27
    • 0018719299 scopus 로고
    • X-Ray Method of Measuring Retained Austenite in Heat Treated White Cast Irons
    • Kim C.M. (1979) X-Ray Method of Measuring Retained Austenite in Heat Treated White Cast Irons. J. Heat Treat. 1: 43-51
    • (1979) J. Heat Treat. , vol.1 , pp. 43-51
    • Kim, C.M.1
  • 28
    • 47249093213 scopus 로고
    • Machinery Industry Press Beijing
    • Fan X. (1981) Metallography of X-Ray. Machinery Industry Press, Beijing
    • (1981) Metallography of X-Ray
    • Fan, X.1
  • 29
    • 43549094615 scopus 로고    scopus 로고
    • Effects of Retained Austenite on Rolling Wear Properties of High Vanadium High Speed Steel
    • (in Chinese)
    • Bai W., S. Wei, R. Long, L. Xu, Z. Dong, X. Yang (2007) Effects of Retained Austenite on Rolling Wear Properties of High Vanadium High Speed Steel. Lubr. Eng. 32: 66-72 (in Chinese)
    • (2007) Lubr. Eng. , vol.32 , pp. 66-72
    • Bai, W.1    Wei, S.2    Long, R.3    Xu, L.4    Dong, Z.5    Yang, X.6
  • 31
    • 33746563095 scopus 로고    scopus 로고
    • A Study of Abrasion Resistant Cast Fe-B-C Alloy
    • Fu H., Z. Jiang (2006) A Study of Abrasion Resistant Cast Fe-B-C Alloy. Acta Metall. Sin. 42: 545-548
    • (2006) Acta Metall. Sin. , vol.42 , pp. 545-548
    • Fu, H.1    Jiang, Z.2
  • 32
    • 0036478530 scopus 로고    scopus 로고
    • A Study on Low-Alloy Cast Steel Wear-Resistance Hammer with Multi-Phase
    • (in Chinese)
    • Shi H., H. Fu, W. Zhang (2001) A Study on Low-Alloy Cast Steel Wear-Resistance Hammer with Multi-Phase Foundry 51: 103-105 (in Chinese)
    • (2001) Foundry , vol.51 , pp. 103-105
    • Shi, H.1    Fu, H.2    Zhang, W.3
  • 33
    • 0031100189 scopus 로고    scopus 로고
    • Friction and Wear Characteristics of M50 High Speed Steel at Elevated Temperature
    • (in Chinese)
    • Liu Z. (1997) Friction and Wear Characteristics of M50 High Speed Steel at Elevated Temperature. Tribology 17: 38-44 (in Chinese)
    • (1997) Tribology , vol.17 , pp. 38-44
    • Liu, Z.1
  • 34
    • 0042880683 scopus 로고    scopus 로고
    • Study on Microstructure and Properties of High Speed Steel Guide Plate Modified by RE-Mg-Ti
    • (in Chinese)
    • Fu H., J. Liu, J. Xing (2003) Study on Microstructure and Properties of High Speed Steel Guide Plate Modified by RE-Mg-Ti. J. Iron Steel Res. 15: 39-43 (in Chinese)
    • (2003) J. Iron Steel Res. , vol.15 , pp. 39-43
    • Fu, H.1    Liu, J.2    Xing, J.3
  • 35
    • 0012701458 scopus 로고    scopus 로고
    • Effects of Alloying Elements on Microstructure and Fracture Properties of Cast High Speed Steel Rolls Part I: Microstructural Analysis
    • Hwang K.C., Lee S.H., Lee H.C. (1998) Effects of Alloying Elements on Microstructure and Fracture Properties of Cast High Speed Steel Rolls Part I: Microstructural Analysis. Mater. Sci. Eng. A254: 282-295
    • (1998) Mater. Sci. Eng. , vol.254 , pp. 282-295
    • Hwang, K.C.1    Lee, S.H.2    Lee, H.C.3
  • 36
    • 0242611507 scopus 로고    scopus 로고
    • Effects of Alloying Elements in Hardenability for high C High Speed Steel Type Alloy
    • Yamamoto K., Kogin T., Harakawa T., Murai N., Kuwano M., Ogi K. (2000) Effects of Alloying Elements in Hardenability for high C High Speed Steel Type Alloy. Imono 72: 90-95
    • (2000) Imono , vol.72 , pp. 90-95
    • Yamamoto, K.1    Kogin, T.2    Harakawa, T.3    Murai, N.4    Kuwano, M.5    Ogi, K.6
  • 38
    • 0029219576 scopus 로고
    • Carbide Dissolution and Precipitation Processes during Hardening of a High-Speed Steel
    • Ernst C., Haberling E., Rasche K. (1995) Carbide Dissolution and Precipitation Processes During Hardening of a High-Speed Steel. Stahl und Eisen 115: 71-76
    • (1995) Stahl und Eisen , vol.115 , pp. 71-76
    • Ernst, C.1    Haberling, E.2    Rasche, K.3
  • 40
    • 0343774007 scopus 로고    scopus 로고
    • Influence of 5% Cobalt Addition on Structure and Working Properties of the 9-2-2-5, 11-2-2-5 and 11-0-2-5 High-Speed Steels
    • Dobrzanski L.A., Kasprzak W. (2001) Influence of 5% Cobalt Addition on Structure and Working Properties of the 9-2-2-5, 11-2-2-5 and 11-0-2-5 High-Speed Steels. J. Mater. Process. Technol. 109: 52-64
    • (2001) J. Mater. Process. Technol. , vol.109 , pp. 52-64
    • Dobrzanski, L.A.1    Kasprzak, W.2
  • 41
    • 0035709390 scopus 로고    scopus 로고
    • Red Hardness of High Speed Steel
    • (in Chinese)
    • Qi Z., Q. Feng, L. Wu, Z. Xie (2001) Red Hardness of High Speed Steel. Heat Treat. Metals 26: 8-11 (in Chinese)
    • (2001) Heat Treat. Metals , vol.26 , pp. 8-11
    • Qi, Z.1    Feng, Q.2    Wu, L.3    Xie, Z.4
  • 42
    • 0346058090 scopus 로고    scopus 로고
    • Performance Appraisal of High Speed Steel Turning Tools
    • Singh N., Prabhakar S.R. (2003) Performance Appraisal of High Speed Steel Turning Tools. Mater. Technol. 18: 218-224
    • (2003) Mater. Technol. , vol.18 , pp. 218-224
    • Singh, N.1    Prabhakar, S.R.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.