In vitro fatigue failure of cemented acetabular replacements: A hip simulator study

Journal of Biomechanical Engineering

Volumn 130, Issue 2, 2008, Pages

  Zant, N P ^a   Heaton Adegbile, P ^a,b   Hussell, J G ^c   Tong, J ^a  

^a UNIVERSITY OF PORTSMOUTH   (United Kingdom)

^b NORTH HAMPSHIRE HOSPITAL   (United Kingdom)

^c QUEEN ALEXANDRA HOSPITAL   (United Kingdom)

Author keywords

Acetabular cups; Fatigue; Finite element analysis; Fixation; Hip simulator

Indexed keywords

BONE; BOUNDARY CONDITIONS; BOUNDARY VALUE PROBLEMS; CEMENT MANUFACTURE; CEMENTING (SHAFTS); CEMENTS; EQUIPMENT TESTING; FINITE ELEMENT METHOD; MATERIALS TESTING; SIMULATORS; STAIRS; STANDARDS; STEEL STRUCTURES; STRESS CONCENTRATION; STRESSES;

3D FINITE ELEMENT ANALYSIS (FEA); ASEPTIC LOOSENING; BODY WEIGHT; BONE CEMENT INTERFACE; CEMENT MANTLE; CONTACT FORCES; CT SCANNING; ENDURANCE TESTING; FAILURE MECHANISMS; FATIGUE BEHAVIOR; FATIGUE FAILURES; FINITE ELEMENT ANALYSIS (FEA); HIP SIMULATORS; IN VITRO STUDIES; IN-VITRO; LOAD LEVELLING; LOADING CONDITIONS; MONITORING DAMAGE; NORMAL WALKING; PHYSIOLOGICAL LOADINGS; STAIR CLIMBING; STRESS DISTRIBUTIONS; TEST RIGS; TOTAL HIP ARTHROPLASTY (THA); WEAR TESTING;

BONE CEMENT;

ARTICLE; CLIMBING; COMPUTER ASSISTED TOMOGRAPHY; COW; FINITE ELEMENT ANALYSIS; FORCE; IN VITRO STUDY; MACHINE; MECHANICAL STRESS; MONITORING; NONHUMAN; PELVIC GIRDLE; PROSTHESIS FAILURE; PROSTHESIS LOOSENING; SIMULATOR; TOTAL HIP PROSTHESIS; VALIDATION PROCESS; WALKING; WEIGHT BEARING; ANIMAL; CATTLE; CHEMISTRY; FATIGUE; HIP ARTHROPLASTY; PHYSIOLOGY;

BOVINAE;

BONE CEMENT;

ANIMALS; ARTHROPLASTY, REPLACEMENT, HIP; BONE CEMENTS; CATTLE; FATIGUE; FINITE ELEMENT ANALYSIS; PELVIC BONES; PROSTHESIS FAILURE;

EID: 47149097448     PISSN: 01480731     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2904466     Document Type: Article

References (25)

1. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., and Syniuta, W. D., 1996, "The Importance of Multidirectional Motion on the Wear of Polyethylene," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 210(3), pp. 157-166.
2. Clarke, I. C., Good, V., Anissian, L., and Gustafson, A., 1997, "Charnley Wear Model for Validation of Hip Simulators - Ball Diameter Versus Polytetrafluoroethylene and Polyethylene Wear," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 211, pp. 25-36.
3. Davy, D. T., Kotzar, G. M., Brown, R. H., Heiple, K. G., Goldberg, V. M., Heiple, K. G. J., Berilla, J., and Burstein, A. H., 1988, "Telemetric Force Measurements Across the Hip After Total Arthroplasty," J. Bone Jt. Surg., 70(L), pp. 45-50.
4. Dowson, D., and Jobbins, B., 1988, "Design and Development of a Versatile Hip Joint Simulator and a Preliminary Assessment of Wear and Creep in Charnley Total Replacement Hip Joints," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 17, pp. 111-117.
5. Dumbleton, J. H., Miller, D. A., and Miller, E. H., 1972, "A Simulator for Load Bearing Joints," Wear, 20(2), pp. 165-174.
6. Goldsmith, A. A. J., and Dowson, D., 1999, "Development of a Ten-Station, Multi-Axis Hip Joint Simulator," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 213(4), pp. 311-316.
7. Paul, J. P., 1967, "Forces Transmitted by Joints in the Human Body," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 181(3), pp. 8-15.
8. Saikko, V. O., 1996, "A Three-Axis Hip Joint Simulator for Wear and Friction Studies on Total Hip Prostheses," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 210(3), pp. 175-186.
9. Viceconti, M., Cavallotti, G., Andrisano, A. O., and Tom, A., 1996, "Discussion on the Design of a Hip Joint Simulator," Med. Eng. Phys., 18(3), pp. 234-240.
10. Bergmann, G., Graichen, F., and Rohlmann, A., 1993, "Hip Joint Loading During Walking and Running, Measured in Two Patients," J. Biomech., 26(8), pp. 969-990.
11. Bergmann, G., 2001, Hip 98, Freie Universitaet, Berlin.
12. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N., 2001, "Hip Contact Forces and Gait Patterns from Routine Activities," J. Biomech., 34(7), pp. 859-872.
13. Paul, J. P., 1999, "Strength Requirements for Internal and External Prostheses," J. Biomech., 32(4), pp. 381-393.
14. Stocks, G. W., Freeman, M. A. R., and Evans, S. J. W., 1995, "Acetabular Cup Migration," J. Bone Jt. Surg., Am. Vol., 77(6), pp. 853-861.
15. Thanner, J., 1999, "The Acetabular Component in Total Hip Arthroplasty: Evaluation of Different Fixation Principles," Acta Orthop. Scand., 70(2), pp. 155-162.
16. Schulte, K. R., Callaghan, J. J., Kelley, S. S., and Johnston, R. C., 1993, "The Outcome of Charnley Total Hip Arthroplasty With Cement After a Minimum Twenty-Year Follow-Up. The Results of One Surgeon," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 75, pp. 961-75.
17. Sundfeldt, M., Carlsson, L. V., Johansson, C. B., Thomsen, P., and Gretzer, C., 2006, "Aseptic Loosening, Not Only a Question of Wear," Acta Orthop. Scand., 77(2), pp. 177-197.
18. Heaton-Adegbile, P., Zant, N. P., and Tong, J., 2006, "In Vitro Fatigue Behaviour of a Cemented Acetabular Reconstruction," J. Biomech., 39, pp. 2882-2886.
19. Bergmann, G., Graichen, F., Rohlmann, A., Deuretzbacher, G., Morlock, M., Heller, M., and Duda, G., 1999, "The Hip Joint: Contact Forces, Gait Data and Load Cycles," European Commission, Contract SMT4-CT96-2076.
20. Currey, J. D., 1984, The Mechanical adaptations of Bones, Princeton University Press, Princeton, NJ.
21. Brear, K., Currey, J. D., Raines, S., and Smith, K. J., 1988, "Density and Temperature Effects on Some Mechanical Properties of Cancellous Bone," Eng. Med., 17, pp. 63-167.
22. Keaveny, T. M., Wachtel, E. F., Zadesky, S. P., and Arramon, Y. P., 1999, "Application of Tsai-Wu Quadratic Multiaxial Failure Criterion to Bovine Trabecular Bone," ASME J. Biomech. Eng., 121, pp. 99-107.
23. Graham, J., Ries, M., and Pruitt, L., 2003, "Effect of Bone Porosity on the Mechanical Integrity of the Bone-Cement Interface," J. Bone Jt. Surg., Am. Vol., 85, pp. 1901-1908.
24. Mann, K. A., Werner, F. W., and Ayers, D. C., 1999, "Mechanical Strength of the Cement-Bone Interface is Greater in Shear Than in Tension," J. Biomech., 32, pp. 1251-1254.
25. Shetty, N. R., Hamer, A. J., Kerry, R. M., Stockley, I., Eastell, R., and Wilkinson, J. M., 2006, "Bone Remodeling Around a Cemented Polyethylene Cup," J. Bone Jt. Surg., Br. Vol., Vol. 88, pp. 455-459.