Formation of highly aligned grooves on inner surface of semipermeable hollow fiber membrane for directional axonal outgrowth

Journal of Manufacturing Science and Engineering

Volumn 130, Issue 2, 2008, Pages 0210111-0210118

  Long, Yu ^a   Zhang, Ning ^b   Huang, Yong ^a   Wen, Xuejun ^b  

^a AMRL   (United States)

^b CLEMSON UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DIMETHYL SULFOXIDE; TEXTURES;

DIMETHYL SULFOXIDE (DMSO); NERVOUS SYSTEM DEVELOPMENT; NEURAL ARCHITECTURES; SEMIPERMEABLE HOLLOW FIBERS; SOLUTION CONCENTRATION; SPINAL CORD INJURIES (SCI); TERNARY PHASE DIAGRAMS; THREE DIMENSIONAL SCAFFOLD;

ORGANIC SOLVENTS;

EID: 47049101272     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2896111     Document Type: Article

References (38)

1. Zhang, N., Yan, H., and Wen, X., 2005, "Tissue Engineering Strategies for Axonal Guidance," Brain Res. Rev., 49(1), pp. 48-64.
2. Lu, J., and Waite, P., 1999, "Advances in Spinal Cord Regeneration," Spine, 24(9), pp. 926-930.
3. Tresco, P. A., 2000, "Tissue Engineering Strategies for Nervous System Repair," Prog. Brain Res., 128, pp. 349-363.
4. Bregman, B. S., 1998, "Regeneration in the Spinal Cord," Curr. Opin. Neurobiol., 8(6), pp. 800-807.
5. Shuaib, A., Xu, K., Crain, B., Siren, A. L., Feuerstein, G., Hallenbeck, J., and Davis, J. N., 1990, "Assessment of Damage From Implantation of Microdialysis Probes in the Rat Hippocampus With Silver Degeneration Staining," Neurosci. Lett., 112(2-3), pp. 149-154.
6. Gerin, C., and Privat, A., 1996, "Evaluation of the Function of Microdialysis Probes Permanently Implanted Into the Rat CNS and Coupled to an On-Line HPLC System of Analysis," J. Neurosci. Methods, 66(2), pp. 81-92.
7. Benveniste, H., and Diemer, N. H., 1987, "Cellular Reactions to Implantation of a Microdialysis Tube in the Rat Hippocampus," Acta Neuropathol. (Berl), 74(3), pp. 234-238.
8. Nakamura, M., Itano, T., Yamaguchi, F., Mizobuchi, M., Tokuda, M., Matsui, H., Etoh, S., Hosokawa, K., Ohmoto, T., and Hatase, O., 1990, "In Vivo Analysis of Extracellular Proteins in Rat Brains With a Newly Developed Intracerebral Microdialysis Probe," Acta Med. Okayama, 44(1), pp. 1-8.
9. Hernandez, L., Stanley, B. C., and Hoebel, B. G., 1986, "A Small, Removable Microdialysis Probe," Life Sci., 39(26), pp. 2629-2637.
10. Aebischcr, P., Winn, S. R., and Galletti, P. M., 1988, "Transplantation of Neural Tissue in Polymer Capsules," Brain Res., 448(2), pp. 364-368.
11. Emerich, D. F., Winn, S. R., Harper, J., Hammang, J. P., Baetge, E. E., and Kordower, J. H., 1994, "Implants of Polymer-Encapsulated Human NGF-Secreting Cells in the Nonhuman Primate: Rescue and Sprouting of Degenerating Cholinergic Basal Forebrain Neurons," J. Comp. Neurol., 349(1), pp. 148-164.
12. Tresco, P. A., Winn, S. R., Tan, S., Jaeger, C. B., Greene, L. A., and Aebischer, P., 1992, "Polymer-Encapsulated PC12 Cells: Long-Term Survival and Associated Reduction in Lesion-Induced Rotational Behavior," Cell Transplant, 1(2-3), pp. 255-264.
13. Winn, S. R., Lindner, M. D., Lee, A., Haggett, G., Francis, J. M., and Emerich, D. F., 1996, "Polymer-Encapsulated Genetically Modified Cells Continue to Secrete Human Nerve Growth Factor for Over One Year in Rat Ventricles: Behavioral and Anatomical Consequences," Exp. Neurol., 140(2), pp. 126-138.
14. Wen, X., 2003, "Studies in the Development of a Bridging Device for Guiding Regenerating Axons," Ph.D. thesis, University of Utah, Salt Lake City, UT.
15. Yang, F., Murugan, R., Wang, S., and Ramakrishna, S., 2005, "EIectrospinning of Nano/Micro Scale Poly(L-Lactic Aeid) Aligned Fibers and Their Potential in Neural Tissue Engineering," Biomaterials, 26(15), pp. 2603-2610.
16. Corey, J. M., Lin, D. Y., Mycek, K. B., Chen, Q., Samuel, S., Feldman, E. L., and Martin, D. C., 2007, "Aligned Electrospun Nanofibers Specify the Direction of Dorsal Root Ganglia Neurite Growth," J. Biomed. Mater. Res., 83A(3), pp. 636-645.
17. Long, Y., Zhang, C., Zhang, N., Huang, Y., and Wen, X., 2005, "Formation of Highly Aligned Grooves on the Inner Surface of Semi-Permeable Hollow Fiber Membrane for the Directional Axonal Outgrowth," Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, FL, Nov. 5-11, Paper No. IMECE2005-81235, pp. 1-9.
18. Zhang, N., Zhang, C., and Wen, X., 2005, "Fabrication of Semi-Permeable Hollow Fiber Membranes With Highly Aligned Texture for Nerve Guidance," J. Biomed. Mater. Res., 75A(4), pp. 941-949.
19. van de Witte, P., Dijkstra, P. J., van den Berg, J. W. A., and Feijen, J., 1996, "Review: Phase Separation Process in Polymer Solutions in Relation to Membrane Formation," J. Membr. Sci., 117, pp. 1-31.
20. Kim, J. H., Min, B. R., Won, J., Park, H. C., and Kang, Y. S., 2001, "Phase Behavior and Mechanism of Membrane Formation for Polyimide/DMSO/Water System," J. Membr. Sci., 187, pp. 47-55.
21. Chung, T. S., and Hu, X., 1997, "Effect of Air-Gap Distance on the Morphology and Thermal Properties of Polyethersulfone Hollow Fibers," J. Appl. Polym. Sci., 66, pp. 1067-1077.
22. Chung, T. S., Xu, Z. L., and Lin, W. H., 1999, "Fundamental Understanding of the Effect of Air Gap Distance on the Fabrication of the Hollow Fiber Membranes," J. Appl. Polym. Sci., 72, pp. 379-395.
23. Tompa, H., 1956, Polymer Solutions, Butterworths, London.
24. Barton, B. F. J., Reeve, L., and Mchugh, A. J., 1998, "Observations on the Dynamics of Nonsolvent-Induced Phase Inversion," J. Polym. Sci., Part B: Polym. Phys., 35(4), pp. 569-585.
25. Lipscomb, G. G., 1994, "The Melt Hollow Fiber Spinning Process: Steady State Behavior, Sensitivity and Stability," Polym. Adv. Technol., 5, pp. 745-758.
26. Oh, T. H., Lee, M. S., Kim, S. Y., and Shim, H. J., 1998, "Studies on Melt-Spinning Process of Hollow Fibers," J. Appl. Polym. Sci., 68, pp. 1209-1217.
27. Su, Y., Lipscomb, G. G., Balasubramanian, H., and Lloyd, D. R., 2006, "Observations of Recirculation in the Bore Fluid During Hollow Fiber Spinning," AIChE J., 52(6), pp. 2072-2078.
28. Pinnau, I., and Koros, W. J., 1993, "A Qualitative Skin Layer Formation Mechanism for Membrane Made by Dry/Wet Phase Inversion," J. Polym. Sci., Part B: Polym. Phys., 31, pp. 419-427.
29. Perez, S., Merlen, E., Robert, E., Cohen Addad, J. P., and Viallat, A., 1993, "Characterization of the Surface Layer of Integrally Skinned Polyimide Membranes: Relationship With Their Mechanism of Formation," J. Appl. Polym. Sci., 47, pp. 1621-1631.
30. McKelvey, S. A., and Koros, W. J., 1996, "Phase Separation, Vitrification, and the Manifestation of Macrovoids in Polymeric Asymmetric Membranes," J. Membr. Sci., 112, pp. 29-39.
31. Smolders, C. A., Reuvers, A. J., Boom, R. M., and Wienk, I. M., 1992, "Microstructures in Phase Inversion Membrances. Part 1. Formation of Macrovoid," J. Membr. Sci., 73, pp. 259-275.
32. Machado, P. S. T., Habert, A. C., and Borges, C. P., 1999, "Membrane Formation Mechanism Based on Precipitation Kinetics and Membrane Morphology: Flat and Hollow Fiber Polysulfone Membranes," J. Membr. Sci., 155, pp. 1171-1183.
33. Santoso, Y E., Chung, T. S., Wang, K. Y., and Weber, W., 2006, "The Investigation of Irregulation Inner Skin Morphology of Hollow Fiber Membranes at High-Speed Spinning and the Solutions to Overcome It," J. Membr. Sci., 282, pp. 383-392.
34. Frish, H. L., Nielaba, P., and Binda, K., 1995, "Surface Effects on Spinodal Decomposition in the Framework of a Linearized Theory," Phys. Rev. E, 52(3), pp. 2848-2859.
35. Milling, A. J., Richards, R. W., Baines, F. L., Armes, S. P., and Billinham, N. C., 2001, "Surface Viscoelastic Parameters of Poly((Dimethylamino)Ethylmethacrylate-Methyl methacrylate) Diblock Copolymer Solutions: pH Dependence of the Evolution of the Equilibrium Values," Macromolecules, 34, pp. 4173-4179.
36. Frommer, M. A., and Messalem, R. M., 1973, "Mechanism of Membrane Formation. VI. Convective Flows and Large Void Formation During Membrane Precipitation," Ind. Eng. Chem. Prod. Res. Dev., 12(4), pp. 328-333.
37. Noblin, X., Buguin, A., and Brochard-Wyart, F., 2002, "Fast Dynamics of Floating Triple Lines," Langmuir, 18, pp. 9350-9356.
38. Dayal, P., and Kyu, T., 2006, "Porous Fiber Formation in Polymer-Solvent System Undergoing Solvent Evaporation," J. Appl. Phys., 100, p. 043512.