Influence of CrC addition in Ni-Cr-Si-B flame sprayed coatings on microstructure, microhardness and wear behaviour

International Journal of Advanced Manufacturing Technology

Volumn 38, Issue 1-2, 2008, Pages 93-101

  Harsha, S ^a   Dwivedi, D K ^a   Agarwal, A ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY ROORKEE   (India)

Author keywords

Abrasive wear; Chromium carbide particles; Flame spraying; Microhardness and microstructure; Mild steel; Ni base alloy coating; Normal load; Post spray heat treatment

Indexed keywords

ABRASION; ABRASIVE COATINGS; ABRASIVES; ADDITION REACTIONS; CARBIDES; CARBON STEEL; CHROMATE COATINGS; CHROMIUM; CLADDING (COATING); COATINGS; FLAME SPRAYING; HEALTH; HEAT RESISTANCE; IRON; LITHOGRAPHY; LOADS (FORCES); MICROHARDNESS; MICROSTRUCTURE; MORPHOLOGY; NICKEL; NICKEL ALLOYS; PESTICIDES; POWDER COATINGS; PROTECTIVE COATINGS; SILICON CARBIDE; SPRAYING; STEEL; WEAR RESISTANCE;

ABRASIVE GRIT SIZE; ABRASIVE WEAR RESISTANCE; ABRASIVE WEARING; CHROMIUM CARBIDES; ELECTRON PROBE MICRO ANALYSIS (EPMA); FLAME SPRAYED COATINGS; GROOVE FORMATION; LOW CARBON STEEL (LCS); NORMAL LOADS; PHASE ANALYSIS; SEM STUDIES; SPRINGER (CO); TEST PARAMETERS; WEAR RATES; WEAR SURFACES;

SPRAYED COATINGS;

EID: 46749127867     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-007-1072-2     Document Type: Article

References (18)

1. Ghosh PK, Dwivedi DK, Mishra PS (2001) Studies on oxidation and wear resistance of hard surface produced by gas thermal spraying of modified nickel base eutectic alloy powder. Indian Weld J 34:35-41
2. Miguel JM, Guilemany JM, Vizcaino S (2003) Tribological study of NiCrBSi coating obtained by different processes. Tribol Int 36:181-187
3. Kim HJ, Kim YJ (1999) Wear and corrosion resistance of PTA weld surfaced Ni and Co based alloy layers. Surf Eng 15:495
4. Wong TT, Liang GY, He BL, Woo CH (2000) Wear resistance of laser-clad Ni-Cr-B-Si alloy on aluminium. Materials Processing Technology 100:142-146
5. Rodriguez J, Martín A, Fernández R, Fernández JE (2003) An experimental study of the wear performance of NiCrBSi thermal spray coatings. Wear 255:950-955
6. Sundararajan T, Kuroda S, Abe F, Sodeoka S (2005) High temperature corrosion of nanoceria coated 9Cr-1Mo ferritic steel in air and steam. Surf Coat Technol (in press)
7. Skulev H, Malinov S, Sha W, Basheer PAM (2005) Microstructural and mechanical properties of nickel-base plasma sprayed coatings on steel and cast iron substrates. Surf Coat Technol 197:177-184
8. Skulev H, Malinov S, Basheer PAM, Sha W (2004) Modifications of phases, microstructure and hardness of Ni-based alloy plasma coatings due to thermal treatment. Surf Coat Technol 185:18
9. Torrance AA (2002) The effect of grit size and asperity blunting on abrasive wear. Wear 253:813-819
10. Moore MA (1974) A review of two-body abrasive. Wear 27:1-17
11. Cachon L, Sudreau F, Denape J, Lelait L (1996) Tribological qualification of cobalt-free coatings for pressurized water reactor primary-circuit gate valve applications. Surf Coat Technol 85(3):163-169, 15
12. 2/NiCr coatings. Tribol Int 34(5):345-351
13. 2-TiN system materials with nickel-chromium alloys. Powder Metall Met Ceram 45(7-8):365-370
14. Sundararajan T, Kuroda S, Abe F (2004) Effect of thermal spray on the microstructure and adhesive strength of high-velocity oxy-fuel-sprayed Ni-Cr coatings on 9Cr-1Mo Steel. Metall Mater Trans A 35(10):3187-3199
15. Dent AH, Horlock AJ, McCartney DG, Harris SJ (2001) Microstructural characterisation of a Ni-Cr-B-C based alloy coating produced by high velocity oxy-fuel thermal spraying. Surf Coat Technol 139(2):244-250
16. Bahrololoom ME, Hoveidaei A (1999) Influence of post-heat treatment and complexing agents on hardness of Ni-Cr alloy coatings. Surf Eng 15(6):502-504
17. 2/(Ni+Cr) composite coating. Surf Coat Technol 110(1):81-85, 10
18. Yeung CF, Mei D (1997) Investigation on the microstructure of spray coating. J Mater Process Technol 68(3):275-278, 15