Damage analysis of carbon/epoxy plates after drilling

International Journal of Materials and Product Technology

Volumn 32, Issue 2-3, 2008, Pages 226-242

  Durão, Luís Miguel Pereira ^a,c   Tavares, João Manuel R S ^b,d   De Magalhães, António Gonçalves ^a,c   Marques, António Torres ^b,d   Baptista, António Paulo M ^b,e  

^a Instituto Superior de Engenharia do Porto   (Portugal)

^b UNIVERSITY OF PORTO   (Portugal)

^c Department of Civil Engineering   (Portugal)

^d UNIVERSITY OF PORTO   (Portugal)

^e DEMEGI

Author keywords

Computational vision; Damage; Delamination; Drilling; Image processing and analysis

Indexed keywords

CARBON; DELAMINATION; DRILLING; IMAGE ANALYSIS; INFILL DRILLING; SURFACE ROUGHNESS;

A-CARBON; CARBON/EPOXY; COMPUTATIONAL VISION; DAMAGE; DAMAGE ANALYSIS; DAMAGE RISKS; IMAGE PROCESSING AND ANALYSIS; TRADITIONAL TECHNIQUES;

NONDESTRUCTIVE EXAMINATION;

EID: 46449086806     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJMPT.2008.018983     Document Type: Article

References (26)

1. Abrate, S. (1997) 'Machining of composite materials', in Mallick, P.K. and Dekker, M. (Eds.): Composites Engineering Handbook, Marcel Dekker Inc., New York, pp.777-809.
2. Awcock, G.W. and Thomas, R. (1995) Applied Image Processing, McGRAW-Hill International Editions, New York.
3. Bader, M.G. (1994) 'Hybrid effect', Handbook of Polymer-fibre Composites, Longman Scientific Technical, pp.225-230.
4. Chen, W.C. (1997) 'Some experimental investigations in the drilling of carbon fibre-reinforced plastic (CFRP) composite laminates', Int. J. Machine Tools and Manufacture, Vol. 37, pp. 1097-1108.
5. Eriksen, E. (1999) 'Influence from production parameters on the surface roughness of a machined short fibre reinforced thermoplastic', Int. J. Machine Tools and Manufacture, Vol. 39, pp.1611-1618.
6. Evans, N. (1996) 'The applicability of radiography to the inspection of composites', Non-destructive Testing of Composite Materials, Imperial College, London, pp. 5/1-5/8.
7. Hamdoun, Z., Guillaumat, L. and Lataillade, J.L. (2004) Influence of the Drilling on the Fatigue Behaviour of Carbon Epoxy Laminates, ECCM 11, Rhodes, Greece.
8. Hocheng, H. and Dharan, C.K.H. (1995) 'Delamination during drilling in composite laminates', J. Engineering for Industry, Vol. 112, pp.236-239.
9. Hocheng, H. and Puw, H. Y. (1992) 'On drilling characteristics of fibre-reinforced thermosets and thermoplastics', Int. J. Machine Tools and Manufacture, Vol. 32, pp.583-592.
10. Hocheng, H. and Tsao, C.C. (2003) 'Comprehensive analysis of delamination in drilling of composite materials with various drill bits', J. Mat. Proc. Techn., Vol. 140, pp.335-339.
11. Jain, R., Kasturi, R. and Schunck, B.G. (1995) Machine Vision, McGRAW-HiIl International Editions, New York.
12. Jung, J.P., Kim, G.W. and Lee, K.Y. (2005) 'Critical thrust force at delamination propagation during drilling of angle-ply laminates', Composite Structures, Vol. 68, pp.391-397.
13. Lachaud, F., Piquet, R., Collombet, F. and Surcin, L. (2001) 'Drilling of composite structures', Composite Structures, Vol. 52, pp.511-516.
14. Mehta, M., Reinhart, T.J. and Soni, A.H. (1992) 'Effect of fastener hole drilling anomalies on structural integrity of PMR-15/Gr composite laminates', Proc. the Machining Composite Materials Symp., ASM Materials Week, pp. 113-126.
15. Persson, E., Eriksson, I. and Zackrisson, L. (1997a) 'Effects of hole machining defects on strength and fatigue life of composite laminates', Composites A, Vol. 28, pp.141-151.
16. Persson, E., Eriksson, I. and Hammersberg, P. (1997b) 'Propagation of hole machining defects in pin-loaded composite laminates', J. Composite Materials, Vol. 31, No. 4, pp.383-408.
17. Piquet, R., Ferret, B., Lachaud, F. and Swider, P. (2000) 'Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills', Composites A, Vol. 31, pp. 1107-1115.
18. Ramulu, M. (1998) 'Characterization of surface quality in machining of composites', in Dekker, M. (Ed.): Machining of Ceramics and Composites, Marcel Dekker Inc., New York, pp.575-648.
19. Schalkoff, R.J. (1989) Digital Image Processing and Computer Vision, John Willey & Sons, Inc., New York.
20. Stone, R. and Krishnamurthy, K. (1996) 'A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy composites', Int. J. Machine Tools and Manufacture, Vol. 36, pp. 985-1003.
21. Tavares, J.M.R.S. (2000) Análise de Movimento de Corpos Deformáveis usando Visão Computacional, PhD Thesis, FEUP, Porto.
22. Tavares, J.M.R.S., Barbosa, J.G. and Padilha, A.J. (2002) 'Apresentação de um Banco de Desenvolvimento e Ensaio para Objectos Deformáveis', RESI - Revista Electrónica de Sistemas de Informação, Vol. 1, p. 14, Available at http://www.inf.ufsc.br/ resi/.
23. Tsao, C.C. and Hocheng, H. (2003) 'The effect of chisel length and associated pilot hole on delamination when drilling composite materials', Int. J. Machine Tools and Manufacture, Vol.43, pp.1087-1092.
24. Tsao, C.C. and Hocheng, H. (2004) 'Taguchi analysis of delamination associated with various drill bits in drilling of composite material', Int. J. Machine Tools and Manufacture, Vol. 44, pp. 1085-1090.
25. Tsao, C.C. and Hocheng, H. (2005) 'Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills', Int. J. Machine Tools and Manufacture, Vol. 45, pp. 1282-1287.
26. Won, M.S. and Dharan, C.H.K. (2002) 'Drilling of aramid and carbon fibre polymer composites', Trans, of ASME J. Manuf. Science and Engineering, Vol. 124, pp.778-783.