Additional losses in induction machines under synchronous no-load conditions

IEEE Transactions on Magnetics

Volumn 40, Issue 5, 2004, Pages 3254-3261

  Bottauscio, Oriano ^a   Chiampi, Mario ^b   Manzin, Alessandra ^a   Zucca, Mauro ^a  

^a ISTITUTO ELETTROTECNICO NAZIONALE GALILEO FERRARIS   (Italy)

^b POLITECNICO DI TORINO   (Italy)

Author keywords

Finite element analysis; Induction motors; Losses

Indexed keywords

APPROXIMATION THEORY; ENERGY DISSIPATION; FERROMAGNETIC MATERIALS; FINITE ELEMENT METHOD; HEATING; NATURAL FREQUENCIES; PARAMETER ESTIMATION; ROTORS; SYNCHRONOUS MACHINERY;

GEOMETRICAL DIMENSIONS; LOOSES; ROTOR MOVEMENT; SQUARE-WAVE SUPPLY;

INDUCTION MOTORS;

EID: 4644273115     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2004.833429     Document Type: Article

References (30)

1. S. Takada, K. Mohri, H. Takito, T. Nomura, and T. Sasaki, "Magnetic losses of electrical iron sheet in squirrel-cage induction model driver by PWM inverter, " IEEE Trans. Magn., vol. 33, pp. 3760-3762, Sept. 1997.
2. C. Cester, A. Kedous-Lebouc, and B. Cornut, "Iron loss under practical working conditions of a PWM powered induction motor, " IEEE Trans. Magn., vol. 33, pp. 3766-3768, Sept. 1997.
3. R. Kaczmarek, M. Amar, and F. Protat, "Iron loss under PWM voltage supply on Epstein frame and in induction motor core, " IEEE Trans. Magn., vol. 32, pp. 189-194, Jan. 1996.
4. A. Boglietti, O. Bottauscio, M. Chiampi, D. Chiarabaglio, and M. Repetto, "Loss separation analysis in ferromagnetic sheets under PWM inverter supply, " IEEE Trans. Magn., vol. 34, pp. 1240-1242, July 1998.
5. G. Bertotti, A. Boglietti, M. Chiampi, D. Chiarabaglio, F. Fiorillo, and M. Lazzari, "An improved estimation of iron losses in rotating electrical machines, " IEEE Trans. Magn., vol. 27, pp. 5007-5009, Nov. 1991.
6. M. Enokizono, M. Morikawa, K. Kawamura, and J. Sievert, "Distribution of two-dimensional magnetic properties in three-phase induction motor model core, " IEEE Trans. Magn., vol. 32, pp. 4989-4991, Sept. 1996.
7. J. J. C. Gyselinck, L. R. Dupré, L. Vandevelde, and J. A. A. Melkebeek, "Calculation of no-load induction motor core losses using the rate-dependent Preisach model, " IEEE Trans. Magn., vol. 34, pp. 3876-3881, Nov. 1998.
8. J. G. Zhu and V. S. Ramsden, "Improved formulations for rotational core losses in rotating electrical machines, " IEEE Trans. Magn., vol. 34, pp. 2234-2242, July 1998.
9. J. Saitz, "Computation of the core loss in an induction motor using the vector Preisach hysteresis model incorporated in finite element analysis, " IEEE Trans. Magn., vol. 36, pp. 769-773, July 2000.
10. J. J. C. Gyselinck, L. Vandevelde, D. Makaveev, and J. A. A. Melkebeek, "Calculation of no-load losses in an induction motor using an inverse vector Preisach model and an eddy current loss model, " IEEE Trans. Magn., vol. 36, pp. 856-860, July 2000.
11. N. Sadowski, M. Lajoie-Mazenc, J. P. A. Bastos, M. V. Ferreira da Luz, and P. Kuo-Peng, "Evaluation and analysis of iron losses in electrical machines using the rain-flow method, " IEEE Trans. Magn., vol. 36, pp. 1923-1226, July 2000.
12. M. Enokizono and K. Okamato, "Designing a low-loss induction motor considering the vector magnetic properties, " IEEE Trans. Magn., vol. 38. pp. 877-880, Mar. 2002.
13. O. Bottauscio, M. Chiampi, and M. Zucca, "Experimental and numerical investigations on rotational fluxes in stator cores of three-phase motors, " IEEE Trans. Magn., vol. 38, pp. 3294-3296, Sept. 2002.
14. C. A. Hernandez-Aramburo, T. C. Green, and A. C. Smith, "Estimating rotational iron losses in an induction machine, " IEEE Trans. Magn., vol. 39. pp. 3527-3533, Nov. 2003.
15. "Characterization of losses in electrical steels, " (CHARLES), Tech. Rep. EU Brite Euram project no. BRPR950019, 1996-1998.
16. O. Bottauscio, A. Canova, M. Chiampi, and M. Repetto, "Iron losses in electrical machines: influence of different material models, " IEEE Trans. Magn., vol. 38, pp. 805-808, Mar. 2002.
17. A. Schoppa, J. Schneider, C.-D. Wuppermann, and T. Bakon, "Influence of welding and sticking of laminations on the magnetic properties of nonoriented electrical steels, " J. Magn. Magn. Mater., vol. 254-255, pp. 367-369, 2003.
18. A. Pulnikov, P. Baudouin, and J. Melkebeek, "Induced stresses due to the mechanical cutting of nonoriented electrical steels, " J. Magn. Magn. Mater., vol. 254-255, pp. 355-357, 2003.
19. M. Emura, F. J. G. Langraf, W. Ross, and J. R. Barreta, "The influence of cutting technique on the magnetic properties of electrical steels, " J. Magn. Magn. Mater., vol. 254-255, pp. 358-360, 2003.
20. A. Boglietti, A. Cavagnino, L. Ferraris, and M. Lazzari, "The annealing influence onto magnetic and energetic properties in soft magnetic materials after punching process, " in Proc. IEEE Int. Electric Machines and Drives Conference (IEMDC'03), Madison, WI, June 2003.
21. A. T. Brahimi, A. Foggia, and G. Meunier, "End winding reactance computation using a 3D finite element program, " IEEE Trans. Magn., vol. 29, pp. 1411-1414, Mar. 1993.
22. R. De Weerdt, K. Hameyer, and R. Belmans, "End ring inductance of a squirrel-cage induction motor using 2D and 3D finite element methods, " in Conf. Rec. IEEE Thirtieth IAS Annu. Meeting, vol. 1, Oct., 8-12 1995, pp. 515-522.
23. P. Zhou, J. Gilmore, Z. Badics, and Z. J. Cendes, "Finite element analysis of induction motors based on computing detailed equivalent circuit parameters, " IEEE Trans. Magn., vol. 34, pp. 3499-3502, Sept. 1998.
24. A. Arkkio, "Finite element analysis of cage induction motors fed by static frequency converters, " IEEE Trans. Magn., vol. 26, pp. 551-554, Mar. 1990.
25. L. Proekt and I. A. Tsukerman, "Method of overlapping patches for electromagnetic computation, " IEEE Trans. Magn., vol. 38, pp. 741-744, Mar. 2002.
26. K. Muramutsu, Y. Yokoyama, N. Takahashi, A. Nafalski, and O. Gol, "Effect of continuitè of potential accuracy in magnetic field analysis using nonconforming mesh, " IEEE Trans. Magn., vol. 36, pp. 1578-1582, July 2000.
27. A. Buffa, Y. Maday, and F. Rapetti, "Calculation of eddy currents in moving structure by a sliding mesh-finite element method, " IEEE Trans. Magn., vol. 36, pp. 1356-1359; July 2000.
28. F. Fiorillo and A. Novikov, "An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform, " IEEE Trans. Magn., vol. 26, pp. 2904-2910, Sept. 1990.
29. G. Bertotti, Hysteresis in Magnetism, New York: Academic, 1998.
30. A. Boglietti, O. Bottauscio, M. Chiampi, and M. Lazzari, "Modeling high frequency phenomena in the rotor of induction motors under no-load test conditions, " J. Magn. Magn. Mater., vol. 254-255, pp. 244-246, 2003.