Solving tribology problems in rotating machines

Solving Tribology Problems in Rotating Machines

Volumn , Issue , 2006, Pages

  Prashad, Har ^a  

^a Bharat Heavy Electricals Limited (BHEL)   (India)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 46349108748     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1533/9781845691110     Document Type: Book

References (184)

1. Darlow, M.S. and Badgley, R.H., 'Applications for Early Detection of Rolling- Element Bearing Failures Using High Frequency Resonance Techniques', ASME, 75-DET-46, 1975.
2. Weichbrodt, B. and Smith, K.A., 'Signature Analysis Non-Intrusive Techniques for Incipient Failure Identification - Application to Bearings and Gears', Proc. 5th Space Simulating Conf., 1970, National Bureau of Standards, Gaithersburg, MD.
3. Burchill, R.F., 'Resonant Structure Techniques for Bearing Fault Analysis', Proc. 18th Meeting MFPG, 1964, National Bureau of Standards, Gaithersburg, MD.
4. Darlow, M.S. and Badgley, R.H., 'Early Detection of Defects in Roller Element Bearings', SAE Paper 750209, 1975.
5. Babkin, A.S. and Anderson, J.J., 'Mechanical Signature Analysis of Ball Bearings', Application Note 3, December 1972, Federal Scientific.
6. Sramek, B., 'Frequency calculations for Ball Bearings', Preliminary note, April, 1978, Nicolet Scientific Corp.
7. Martin, R.L., 'Detection of Ball Bearing Malfunctions', J. Instrum. Control Systems, 79-82, Dec. 1970.
8. Prashad, H., et al., 'Reliability Analysis of Anti-friction Bearings by High Frequency Resonance Technique', BHEL J., 1985, 6(1), 1-15.
9. Prashad, H., Ghosh, M. and Biswas, S., 'Diagnostic Monitoring of Rolling-Element Bearings by High Frequency Resonance Technique', ASLE Trans., 1985, 28(4), 439-448
10. Markert, F.J. and Schweinfurt, S.K.F., 'Functional and Acceptance Testing in Rolling Bearing Development', Ball Bearing J., 224, 28-32, 1985.
11. Prashad, H., 'Performance Evaluation of Rolling Element Bearings', National Conference of Mach. Mech., IISc, Bangalore (India), 1985.
12. Witte, D.C., 'Forecasting the Operating Temperature of Bearings', D K 621-822, 6536:721, Machine-31 (Din), 2/77, pp. 80-83.
13. Goldberg, D.D. et al., 'Selection of Test Acceleration Coefficients for Bearing Units of Electrical Machines', Electrotekhnika, 55, 10, 34-36, 1984.
14. Taylor, S.C., 'Noise in Bearings', J. Eng. Mater. Des., February 1979.
15. Mathew, J. and Alfredson, R.J., 'The Condition Monitoring of Rolling Element Bearings using Vibration Analysis', ASME J. Vibr., Acoust., Stress, Reliab. Des., 106, 447-453, July 1984.
16. Prashad, H., 'Condition Monitoring of Anti-friction Bearing', J. Inst. Eng. (I), 69, 65-74, 1989.
17. Prashad, H., et al., 'Diagnostic Monitoring of Rolling Element Bearings by High Frequency Resonance Technique', ASLE Trans., 28(4) 439-448, 1985.
18. Prashad, H., 'The Effect of Cage and Roller Slip on the Measured Defect Frequency Response of Rolling Element Bearings', ASLE Trans., 30(3), 360-367, 1986.
19. Betthel, K., 'The Shock Pulse Method for Monitoring the Condition of Anti Friction Bearings', SPM Catalogue, 1977.
20. Kurtosis Technical Handbook, Condition Monitoring Ltd, 1982.
21. Ball Roller Bearing Eng., Indus. Eng. J., FAG, EA 10-12, 1983.
22. Prashad, H., 'Functional Performance of Roller Bearings for Acceptance in Routine Applications', J. Inst. Eng. India, Part MC, Div., Mech. Eng. 70, 105-113, 1995.
23. Boness, R.J., 'Cage and Roller-Slip in High Speed Roller bearings', J. Mech. Sci., 2(2), 1969.
24. Smith, C.F., 'Some Aspects of the Performance of High Speed Lightly Loaded Cylindrical Roller Bearings', Proc. Inst. Mech. Eng., 176(227), 566, 1962.
25. Dowson, D. and Higginson, G.R., 'Theory of Roller Bearing Lubrication and Deformation', Proc. Lubr. Wear Covn. (Inst. Mech. Eng.), London, 216, 1963.
26. Harris, T.A., 'An Analytical Method to Predict Skidding in High-speed Roller Bearings', ASLE Trans., 9(3), 229-241, 1966.
27. Prashad, H., Ghosh, M. and Biswas, S., 'Diagnostic Monitoring of Rolling-element Bearings by High Frequency Resonance Technique', ASLE Trans., 28(4) 439-448, 1985.
28. Sramek, B., 'Frequency Calculations for Ball Bearings', Preliminary note, Nicolet Scientific Corp., April, 1978.
29. Nishio, K. et al., 'An Investigation of Early Detection of Defects in Ball Bearings by Vibration Monitoring', ASME Paper 79-DET-45, 1979.
30. McFadden, P.D. and Smith, J.D., 'Vibration Monitoring of Rolling-element Bearings by High-Frequency Resonance Technique - A Review', Tribol. Int., 17(1), 84, 1986.
31. Steward, R.M., 'Application of Signal Processing Techniques to Machinery Health Monitoring, Application of Time Series Analysis', paper available from Inst. of Sound and Vibration Research, University of Southampton, 16.1-16.23, April 1980.
32. Kaido, H. and Doi, Y., 'Cage Slip and its Effect on Damages in High Speed Roller Bearing', Proc. JSLE Intl. Tribol. Conf., Tokyo, Japan, pp. 591-596, 8-10, July 1985.
33. Prashad, H., 'The Effect of Cage and Roller Slip on the Measured Defect Frequency Response of Rolling-element Bearings', ASLE Trans., 30(3), 360-366, 1987.
34. Prashad, H., 'Investigations of Damaged Rolling-element Bearings and Deterioration of Lubricants under the Influence of Electric Current', Wear, 176, 151-161, 1994.
35. Bradford, M., 'Prediction of Bearing Wear due to Shaft Voltage in Electrical Machines', ERA Technology Limited, 1984.
36. Prashad, H., 'Investigations on Corrugated Pattern on the Surface of Roller Bearings Operated under the Influence of Electrical Fields', Lub. Eng., 44, 8, 710-718, 1988.
37. Prashad, H., 'Effects of Operating Parameters on the Threshold Voltages and Impedance Response of Non-insulated Rolling-element Bearings under the Action of Electric Current', Wear, 117, 223-240, 1987.
38. Prashad, H., 'Magnetic Flux Density Distribution on the Track Surface of Rollingelement Bearings - An Experimental and Theoretical Investigation', Tribol. Trans., 39, 2, 386-391, 1996.
39. Morgan, A.W. and Whillie, D., 'A Survey of Rolling Bearing Failures', Proc. Inst. Mech. Eng. Part F, 184, 48-56, 1969/70.
40. Andreason, S., 'Effects of an Electric Current on Contact Temperature, Contact Stresses and Slip band initiation on Roller Track of Roller Bearings,' Ball Bearing J., 153, 6-12, 1968.
41. Simpson, F.E. and Crump J.J., 'Effects of Electric Currents on the Life of Rolling contact Bearings', Proc. Lubrication and Wear Convention, Bournemouth, 1963, Institution of Mechanical Engineers, London, 1963, Paper 27, 296-304.
42. Prashad, H., 'Analysis of the Effects of Electric Current on Contact Temperature Contact Stresses and Slip Band Initiation on the Roller Tracks of Roller Bearings', Wear, 131, 1-14, 1989.
43. Prashad, H., 'Diagnosis of Deterioration of Lithium Greases used in Rollingelement Bearings by X-ray Diffractometry', Tribol. Trans., 32 (2) 205-214, 1989.
44. Komatsuzaki, S., 'Bearing Damage by Electrical Wear and its Effects on Deterioration of Lubricating Grease', Lub. Eng., 43, 25-30, 1987.
45. Remy, M. and Magnin, A., 'Rheological and Physical Studies of Lubricating Greases Before and After Use in Bearings', Trans. ASME, J. Tribol., 118, 681-686, 1996.
46. Winder L.R. and Wolfe, O.J., 'Valuable Results from Bearing Damage Analysis', Met. Prog., April, pp. 52-59, 1966.
47. Prashad, H., 'Diagnosis of Failure of Rolling-element Bearings of Alternators - A Study', Wear, 198(1-2), 49-51, 1996.
48. Prashad, H., 'The Effect of Current Leakage on Electro-adhesion Forces in Rolling - Friction and Magnetic Flux Density Distribution on the Surface of Rolling- Element Bearing', Trans. ASME, J. Tribol., 110, 448-455, 1988.
49. Prashad, H., Ghosh, M. and Biswas S., 'Diagnostic Monitoring of Rolling-element Bearing by High-frequency Resource Technique', ASLE Trans., 28(4) 39-448, 1985.
50. Prashad, H., 'Investigations and Diagnosis of Failure of Rolling-element Bearings Due to Unforeseen Causes - A Case Study', BHEL J., 20(1), 59-67, 1999.
51. Prashad, H., 'Diagnosis and Cause Analysis of Rolling-element Bearings Failure in Electric Power Equipments Due to Current Passage', Lub. Eng., 5, 30-35, 1999
52. Prashad, H., 'Investigations of Damaged Rolling-element Bearings and Deterioration of Lubricants under the Influence of Electric Current,' Wear, 176, 151-161, 1994.
53. Bradford, M., 'Prediction of Bearing Wear due to shaft Voltage in Electrical Machines', Technical Report No. 84-007, ERA Technology Limited, England, pp. 49-53, 1984.
54. Prashad, H., 'Investigations on Corrugated Pattern on the Surface of Roller Bearings Operated Under the Influence of Electrical Fields', Lubr. Eng., 44(8), 710-718, 1988.
55. Prashad, H., 'Effects of Operating Parameters on the Threshold Voltages and Impedance Response of Non-insulated Rolling-element Bearings under the Action of Electric Current', Wear, 117, 223-240, 1987.
56. Busse, D., Erdman, J., Kerkman, R.J., Schlegel, D. and Skibinski, G., 'System Electrical Parameters and their Effects on Bearing Currents', IEEE Trans. Ind. Appl. 33(2) 577-584, 1997.
57. Prashad, H., 'Determination of Magnetic Flux Density on the Surfaces of Rollingelement Bearings as an Indication of the Current that has Passed Through Them - An Investigation', Tribol. Int., 32, 455-467, 1999.
58. Morgan, A.W. and Wyllie, D., 'A Survey of Rolling Bearing Failures', Proc. Inst. Mech. Eng., Part F 184, 48-56, 1969-70.
59. Andreason, S., 'Passage of Electric Current through Rolling Bearings', Ball Bearing J. 153, 6-12, 1968.
60. Simpson, F.E. and Crump, W.J.J., 'Effects of Electric Currents on the Life of Rolling Contact Bearings', Proc. Lubrication and Wear Convention, Bournemouth, Inst. Mech. Eng., London, Paper 27, pp. 296-304, 1963.
61. Prashad, H., 'Analysis of the Effects of Electric Current on Contact Temperature Contact Stresses and Slip Band Initiation on the Roller Tracks of Roller Bearings', Wear, 131, 1-14, 1989.
62. Komatsuzaki, S., 'Bearing Damage by Electrical Wear and its Effects on Deterioration of Lubricating Grease', Lubr. Eng., 43(1), 25-30, 1987.
63. Prashad, H., 'Diagnosis of Deterioration of Lithium Greases used in Rollingelement Bearings by X-ray Diffractometry', Tribol. Trans., 32 (2), 205-214, 1989.
64. Remy, M. and Magnin, A., 'Rheological and Physical Studies of Lubricating Greases Before and After Use in Bearings', Trans. ASME, J. Tribol., 118, 681-686, 1996.
65. Lin, C.M., Chiou, Y.C. and Lee, R.T., 'Pitting Mechanism on Lubricated Surface of Babbit Alloy/Bearing Steel Pair under AC Electric Field', Wear, 249, 133-142, 2001.
66. Chiou, Y.C., Lee, R.T. and Lin, C.M., 'Formation Criterion and Mechanism of Electrical Pitting on the Lubricated Surface under AC Electrical Field', Wear, 236, 62-72, 1999.
67. Winder, L.R. and Wolfe, O.J., 'Valuable Results from Bearing Damage Analysis', Metal Progress, 4, 52-59, 1968.
68. Prashad, H., 'Diagnosis of Failure of Rolling-element Bearings of Alternators - A Study', Wear, 198, 46-51, 1996.
69. Prashad, H., 'The Effect of Current Leakage on Electro-adhesion Forces in Rolling - Friction and Magnetic Flux Density Distribution on the Surface of Rollingelement Bearing', Trans. ASME, J. Tribol., 110, 448-455, 1998.
70. Prashad, H., Ghosh, M. and Biswas, S., 'Diagnostic Monitoring of Rolling-element Bearing by High-frequency Resource Technique', ASLE Trans., 28(4), 439-448, 1985.
71. Prashad, H., 'Diagnosis and Cause Analysis of Rolling-element Bearing Failure in Electrical Power Equipment Due to Current Leakage', Lubr. Eng., 55(5), 30-35, 1999.
72. Prashad, H., 'The Effect of Cage and Roller Slip on the Measured Defect Frequency Reference of Rolling-element Bearings', ASLE Trans, 30(3), 360-66, 1987.
73. Starling, S.G., Electricity and Magnetism, 7th ed., Longmans, Green and Co., New York, 1960.
74. Prashad, H., 'Determination of Time Span for Appearance of Flutes on Track Surface of Rolling-element Bearings Under the Influence of Electrical Current', Tribol. Trans, 41(1), 103-109, 1998.
75. Prashad, H. and Murthy, T.S.R., 'Behavior of Greases in Statically Bounded Conditions and When Used in Non-insulated Anti-friction Bearings Under the Influence of Electrical Fields', Lubr. Eng., 44(3), pp. 239-246, 1988.
76. Prashad, H., 'Theoretical Analysis of the Effects of Instantaneous Charge Leakage on Roller Track of Roller Bearings Lubricated with High Resistivity Lubricants', Trans. ASME J. Tribol., 112, 37-43, 1990.
77. Prashad, H., 'Diagnosis of Rolling-element Bearings Failure by Localized Current Between Track Surfaces of Races and Rolling-Elements', Trans. ASME J. Tribol., 124, 468-473, 2002.
78. Prashad, H. and Murthy, T.S.R., 'Behaviour of Greases in Statically Bounded Conditions and When Used in Non-insulated Anti-friction Bearings Under the Influence of Electrical Fields', Lubr. Eng., 44(3), 239-246, 1988.
79. Prashad, H., 'Experimental Study on Influence of Electrical Fields on Behaviour of Grease in Statically Bounded Conditions and When Used in Non-insulated Bearings', BHEL J., 7(3), 18-34, 1996.
80. Polacios, J.M., 'Elasto-hydrodynamic Films of Lithium Greases', Macanique, Materiaux, Electricite (GAMI), 176, 365-366, 1980 (also published in NLGI Spokesman, March 1981).
81. Pastnikov, S.N., 'Electrophysical and Electrochemical Phenomena in Friction, Cutting and Lubrication', VNR, 1978.
82. Prashad, H., 'Variation and Recovery of Resistivity of Greases - An Experimental Investigation', J. Lubr. Sci. (France), 11-1, 73-103, November 1998.
83. Prashad, H., 'Diagnosis of Lithium Greases Used in Rolling-element Bearings by X-Ray Diffractometry', STLE Trans, 32(2), 205-214, 1989.
84. Prashad, H. and Murthy, T.S.R., 'Deterioration of Lithium Greases Under the Influence of Electrical Current - An Investigation', J. Lubr. Sci. (France), 10-4, 323-342, August 1998.
85. Prashad, H., 'Investigations of Damaged Rolling-element Bearings and Deterioration Response and performance of a rolling-element bearing 103 of Lubricants Under the Influence of Electrical Fields', Wear, 176, 151-161, 1994.
86. Prashad, H., 'Investigations of Corrugated Pattern on the Surfaces of Roller Bearings Operated Under the Influence of Electrical Fields', ASME/ASLE Tribology Conference, San Antonio Marriott (5-8, Oct. 1987), also published in Lubr. Eng., 44, 710-718. 1988.
87. Prashad, H., 'The Effect of Cage and Roller Slip on the Measured Defect Frequency Response of Rolling-element Bearings', ASLE Trans, 30(3), 360-367, July 1987.
88. Prashad, H., 'The Effects of Current Leakage on Electroadhesion Forces in Rolling Friction and Magnetic Flux Density Distribution on the Surface of Rolling-element Bearings', Trans. ASME, J. Tribol., 110, 448-455, 1988.
89. Tasker, J.L. and Graham, R.S., 'Effects of Magnetic Flux on Rolling-element/Bearings', IEE Conference, 17-19, Sept. 1985, Publication 254, pp. 152-156.
90. Prashad, H., 'Magnetic Flux Density Distribution on the Track Surface of Rollingelement Bearings - An Experimental and Theoretical Investigation', Tribol. Trans, 39(2), 386-391, 1996.
91. Prashad, H., 'Determination of Magnetic Flux Density on the Surfaces of Rollingelement Bearings as an Indication of the Current That Has Passed Through Them - An Investigation', Tribol. Int., 32, 455-467, 1999.
92. Prashad, H., 'Determination of Magnetic Flux Density on the Surfaces of Rollingelement Bearings - An Investigation', BHEL J., 21(2), 49-66, August 2000.
93. Prashad, H., 'Effects of Operating Parameters on the Threshold Voltages and Impedance Response on Non-insulated Rolling-Element Bearings under the Influence of Electrical Currents', Wear, 117, 223-240, 1987.
94. Prashad, H., 'Theoretical Analysis of Impedance, Capacitance and Charge Accumulation of Roller Bearings Operated Under Electrical Fields', Wear, 125, 223-239, 1988. Also in BHEL J., 9(2), 21-30, 1988.
95. Prashad, H., 'Analysis of the Effects of Electrical Currents on Contact Temperature, Residual Stresses, and Slip Bands Initiation on Roller Tracks of Roller Bearings', Wear, 131, 1-14, 1989.
96. Prashad, H., 'Theoretical Analysis of the Effects of Instantaneous Charge Leakage on Roller Bearings Lubricated with High Resistivity Lubricants under the Influence of Electric Current', Trans. ASME, J. Tribol., 112, 37-43, 1990.
97. Prashad, H., 'Theoretical Analysis of Capacitive Effect of Roller Bearings on Repeated Starts and Stops of a Machine Operating under the Influence of Shaft Voltages', Trans. ASME, J. Tribol., 114, 818-822, October 1992.
98. Ramsden, P., 'Review of Published Data and Their Application to the Design of Large Bearings for Steam Turbines', Proc. Inst. Mech. Eng., 182, pt 3A, 1967-68.
99. 'Calculation Methods for Steadily Loaded Pressure-fed Hydrodynamic Journal Bearings', Engineering Science Data, Item No. 66023, ASME, 1965.
100. Yakhin, Z.A., 'Determination of Oil Temperature in Load Carrying Oil Film in Journal Bearings', Russian Eng. J. YDK 621, 436-233, 21.00.1.5, 21-23, 1973.
101. Nika, A., 'Friction and Thermal Characteristics of Radial Bearing', Russian J. Friction Lubr., No. 3, Series F, 1-7, 1970.
102. Booser, E.R., Ryan, F.D. and Linkinhaker, C.L., 'Maximum Temperature for Hydrodynamic Bearings under Steady Load', ASLE, 1970.
103. Martin, F.A. and Garner, D.R., 'Plain Journal Bearings under Steady Loads, Design Guidance for Safe Operation', Paper No. C313173, European Tribology Conference, 1972.
104. Petrunichev, A.E., 'Boundary Limit of Load-carrying Oil Film in Sliding Bearing', Izveschiya AH USSR, Mashinovegenue, 4, 24-30, 1971.
105. Contantinescu, V.N., 'Analysis of Bearings Operating in Turbulent Regime', J. Basic Eng., 82-92, March 1982.
106. Wilcock, D.F., 'Turbulent Lubrication - Its Genesis and Role in Modern Design', Trans. ASME, January 1974.
107. Ferron, J., Frene, J. and Boncompain, R., 'A Study of the Thermohydrodynamic Performance of a Plain Journal Bearing - Comparison between Theory and Experiments', ASME/ASLE Joint Lubrication Conference, Washington, DC, 5-7, October 1982, Paper No. 82-Lub-16.
108. Prashad, H., 'The Effect of Viscosity and Clearance on the Performance of Hydrodynamic Journal Bearings', STLE Trans., 31(1), 113-119, 1988.
109. Prashad, H., 'A Simplified Procedure to Study the Effect of oil Grades and Clearance Ratios on Reliability of Performance of Cylindrical Bearings', BHEL J., 10(2), 39-56, 1989.
110. Zandfos, L.V., 'Determination of Dimensions of a Spherical Bearing', Vestnik Mashinostroeniya, 56(7) (V.D.C. 621.828.001.24 Russian Eng. J.), 37-38, 1976.
111. Zandfos, L.V., 'Moment of Friction of a Spherical Bearing', Izv. Vuzov, Mashinostroenie, 9, 34-38, 1973.
112. Neale, N.J., 'Tribology Hand Book', Newnes, Butterworth, 1970.
113. Prashad, H., 'The Effects of Viscosity and Clearance on the Performance of Hydrodynamic Journal Bearings', ASLE 42nd Annual Meeting, Anaheim, California, 11-14, May 1987. Also published in STLE Trans., 31(1), 113-119, 1988.
114. Martin, F.A. and Garner, D.R., 'Plain Journal Bearings under Steady Loads - Design Guidance for Safe Operation', Paper No. C313/73, First European Tribology Conference, pp. 449-463, 1973.
115. Peeken, H., 'The Effect of Bearing Design on the Reliability of Journal Bearing Behaviour', Institute of Mechanical Engineers, Paper No. C 308/73, pp. 407-413, 1973.
116. Prashad, H., 'A Simplified Design Methodology for Determination of Optimum Values of Design Parameters of Spherical Seating of Hydrodynamic Journal Bearings", BHEL J., 10(1), 45-50, 1989.
117. Goel, P.K., Jaya Prakash, K.C and Srivastava S.P., 'Oxidation Stability of Steam Turbine Oil and Laboratory Methods of Evaluation', ASLE Trans., 2, 89-95, 1984.
118. Warne, T.M. and Vienna, P.C., 'High Temperature Oxidation Testing of Lubricating Oil', ASLE Trans., 40, 211-217, 1984.
119. Herderm, D., Vienna, P.C., 'Control of Turbine Oil Degradation During Use', ASLE Trans., 37, 67-71, 1980.
120. Murthy, T.S.R., Prashad, H. and Jagga, C.R., 'Life Estimation of Turbine Oils - A Methodology Criterion for Acceptance', Petrotech 2003, 9-12, January, New Delhi.
121. Binns, K.J. and Dye, M., 'Identification of Principal Factors Causing Unbalanced Magnetic Pull in Cage Induction Motors', Proc. IEE, 120(3), 349-354, March 1973.
122. Ecbert, J. and Gahleitner, A., 'Experimental Method for Determining the UMP in AC Induction Motors', ERA Trans. - 2792, July 1970.
123. Vonkachne, P., UMP in Rotating Electric Machine - Survey of Published Work, ERA Report z/T 142, 1963.
124. Rai, G.B., Air Gap Eccentricity in Induction Motors, ERA 74-1188, July 1974.
125. Rosenbery, E., 'Magnetic Pull in Electric Machines', AIEE Trans., pp. 1069-1113, 1918.
126. Prashad, H. and Shastry, K.S., 'Performance Evaluation of A.C. Motors through Experimental Determination of Axial Force on Bearings', Condition Monitoring Seminar, Ahmedabad (India), pp. MF 15-20, 1986.
127. Prashad, H., 'The Effects of Viscosity and Clearance on the Performance of Hydrodynamic Journal Bearings', STLE Trans., 31(1), 113-119, 1988.
128. Nevelsteen, J., 'Vibration, Causes and Effects on Large Electric Motors', 25th Annual Petroleum and Chemical Industries Conference, New York, pp. 214-217, 1978.
129. Maxwell, J.H., 'Diagnosing Induction Motor Vibration', Hydrocarbon Proc., 60, 117-120, January 1981.
130. Gupta, S.K., 'Vibration in Induction Motors - Concepts, Nature, Analysis and Control', BHEL J., 5(1) 1-8, 1981.
131. 'Criteria for Assessing Mechanical Vibrations of Machines', VDI 2056, Oct. 1964.
132. Baxter, R.L. and Bernhard, D.L., 'Vibration and Indicating Tool', Mech. Eng., 60-65, March 1968.
133. Prashad, H. and Rai, L.N., 'Analysis of Time Bound Increase in Vibrations of Large Synchronous Electric Motor - An Investigation', BHEL J., 13, 54-61, 1992.
134. Prashad, H., 'Investigations of Corrugated Pattern on the Surface of Roller Bearings Operated under the Influence of Electrical Fields', Lub. Eng., 44(8), 710-718, 1988.
135. Bradford, M., Prediction of Bearing Wear Due to Shaft Voltage in Electrical Machines, ERA Technology Limited, 1984.
136. Prashad, H., 'Theoretical and Experimental Investigation on the Pitch and Width of Corrugations on the Surface of Ball Bearings', Wear, 143, 1-14, 1991.
137. Prashad, H., 'Effects of Operating Parameters on the Threshold Voltages and Impedance Response of Non-insulated Rolling-element Bearings Under the Action of Electric Current', Wear, 117, 223-240, 1987.
138. Prashad, H., 'The Effect of Current Leakage on Electro-adhesion Forces in Rollingfriction and Magnetic Flux Density Distribution on the Surface of Rolling-element Bearings', ASME, J. Tribol., 110, 448-455, 1988.
139. Prashad, H., 'Diagnosis of Deterioration of Lithium Greases used in Rollingelement Bearings by X-ray Diffractrometry', Tribol. Trans., 32(2), 205-214, 1989.
140. Prashad, H., 'Investigation of Damaged Rolling-element Bearings and Deterioration of Lubricants under the Influence of Electric Current', Wear, 176, 151-161, 1994.
141. Prashad, H., 'Magnetic Flux Density Distribution on the Track Surface of Rollingelement Bearings - An Experimental and Theoretical Investigation' Tribol. Tran., 39(2), 386-391, April 1996.
142. Tasker, J.L. and Graham, R.S., 'Effects of Magnetic Flux on Rolling-element Bearings', IEE Conference, 17-19, Sept. Publication 254, pp. 152-156, 1985.
143. Prashad, H., 'Diagnosis of Failure of Rolling-element Bearings of Alternators - A Study', Wear, 198, 46-51, 1996.
144. Boyd, J. and Kaufman, H.N., 'The Causes and Control of Electrical Currents in Bearings', Lub. Eng., 15(1), 28-35, 1988.
145. Chu, P.S.Y. and Cameron, A., 'Flow of Electrical Currents Through Lubricated Contacts', ASLE Trans., 10, 226-234, 1967.
146. Bradford, M., 'Prediction of Bearing Wear due to Shaft Voltage in Electrical Machines', ERA Technology Limited, 1990.
147. Prashad, H., 'Effects of Operating Parameters on the Threshold Voltages on Noninsulated Rolling-element Bearings under the Action of Electrical Currents', Wear, 117, 223-240, 1987.
148. Prashad, H. and Rao, K.N., 'Analysis of Capacitive Effect and Life Estimation of Hydrodynamic Journal Bearings on Repeated Starts and Stops of a Machine operating under the Influence of Shaft Voltage', Tribol. Trans., 37(3), 641-645, 1994.
149. Prashad, H., 'Analysis of Inductive Effects of Bearings under the Influence of Shaft Voltages', BHEL J., 15(1), 26-31, 1994.
150. Starling, G.S., Electricity and Magnetism, Green and Co., New York, 1975.
151. Prashad, H., 'Diagnosis of Bearing Problem of Synchronous Condenser-An Experimental and Theoretical Investigation', Wear, 188, 97-101, 1995.
152. Pump Handbook, edited by Karassik, J., Kritzsch, W.C., Fraser, W.H. and Messina, J.P., McGraw-Hill, New York, 1976.
153. Pump Application Engineering, Hicks, T.G. and Edwards, T.W. McGraw-Hill, New York, 1971.
154. International Standard ISO 2372 and ISO 3945-1977(8).
155. Prashad, H., Chauhan, R.B.S., Panwalkar, A.S. and Narsimhan, G.S.L., BHEL, Feedback J., 18-24, June 1987.
156. Gupta, R.P., Mantrawadi, S.C. and Chandra, S.K., Pumping of Water by a Windmill, BHEL R&D Report, 1985.
157. 'Smooth Operation and High Degree of Safety, Large Rolling Bearings in the Wind Power Station GROWAN', Ball Roller Bearing Eng. (1) 1983.
158. Prashad, H. and Gupta, R.P., 'Bearings and Design Modifications for Trouble-free and Reliable Operation of Horizontal-axis Windmills used for PumpingWater', BHEL J., 7(1), 14-19, 1986.
159. Shotter, G.F. and Tagg, G.F. Induction Type Integrating Meters, Pitman & Sons, London.
160. Trekeli, H.F., Mendelssohn, L.I. and Wright, J.H., 'Magnetic Suspension of the Watt Hour Meter Rotor', Trans. AIEE, 57, 1180, 1948.
161. Magnetic Suspension Bearings, GEC Publication No. M5-002E, UK.
162. Glyde, T., 'Meters with Magnetic Suspension', International Conference on Metering and Apparatus for Modern Electricity Supply Tariffs, London, 1967.
163. Lovegrove, H.J., 'Magnetic Bearings for Watthour Meters' International Conference on Metering and Apparatus for Modern Electricity Supply Tariffs, London, 1967.
164. Bhargava, S.C. and Prashad, H., 'Magnetic Suspension Bearings for A.C. Energy Meters', BHEL J., 6(2), 12-21, 1985.
165. Anderson, W.J., Tribology for Aerospace Application, SKF, pp. 526-528, 1973.
166. Hamrock, B.J. and Dowson, D., Ball Bearing Lubrication, John Wiley and Sons, 1981.
167. Boness, R.J., 'Cage and Roller Slip in High Speed Roller Bearings', J. Mech. Sci., II, 2, 1969.
168. Smith, C.F., 'Some Aspects of the Performance of High Speed Lightly Loaded Cylindrical Roller Bearing', Proc. Inst. Mech. Eng., 176(227), 566, 1962.
169. Dowson, D. and Higginson, G.R., 'Theory of Roller Bearing Lubrication and Deformation', Lubrication and Wear Convention (Institution of Mechanical Engineers), London, p. 216, 1963.
170. Harris, T.A., 'An Analytical Method to Predict Skidding in High Speed Roller Bearings', ASLE Trans., 9(3), 229-241, 1966.
171. Prashad, H., 'The Effect of Cage and Roller Slip on the Measured Defect Frequency Response of Rolling Element Bearing', ASLE Trans, 30(3), 360-367, 1986.
172. Tedric, H.A., Rolling Bearing Analysis, John Wiley and Sons, Inc., New York, 1966.
173. Houghton, P.S., Ball and Roller Bearings, Applied Science Publishers Ltd, London, 1976.
174. Burnaby Lautier, E. and Jutpass, E.R.C., 'Test Rig for Axle Box Bearings for High Speed Trains', Ball Bearing J., 141, 1978.
175. Beagley, T.M., 'SKF "THISBE" Test Rig', SKF Report No. NL 777515, 1978.
176. Prashad, H., 'A New Generation Double Decker High Precision Rolling-element Bearings - Concept, Development and Investigations', Tribol. Trans., 44(2), 203-208, April 2001.
177. Prashad, H., 'New Generation Rolling-element Bearings - An Investigation', BHEL J., 23(2), 43-56, October 2002.
178. Prashad, H., 'Relative Comparison of Stiffness and Damping Properties of Double Decker High Precision and Conventional Rolling-element Bearing', Tribol. Int., 35, 265-269, 2002.
179. Prashad, H., 'Experimental Evaluation of the Stress Distribution on the Outer Surface of the Outer Race of Conventional and Double Decker High Precision Bearing', Tribo. Test, J., 9(3), 249-260, March 2003.
180. Prashad, H., 'Pattern of Cyclic Stresses on Outer Race of Conventional Bearings vis-à-vis Double Decker High Precision Bearing - An Investigation', BHEL J., 24(2) 38-47, June 2003.
181. Prashad, H., 'Energy Efficient Bearings - An Investigation', J. Lub. Eng., 59(6) 17-22, June 2003.
182. Prashad, H., 'A Theoretical Approach to Evaluating the Performance Characteristics of Double Decker High-Precision Bearings', Tribotest, J., 10(3), 251-263, March 2004.
183. Prashad, H., 'An Analysis of Axial Deflection of Double Decker High Precision Bearings vis-à-vis Conventional Ball Bearings', J. Lub. Eng., 2006.
184. Prashad, H., 'Centrifugal Forces on Double Decker High Precision and Conventional Ball Bearings', J. Inst. Eng. (I), 86, 109-114, July 2005.