Technical Aspects

Electrodeposition from Ionic Liquids

Volumn , Issue , 2008, Pages 287-351

  Silvester, Debbie S ^a   Rogers, Emma I ^a   Compton, Richard G ^a   McKenzie, Katy J ^b   Ryder, Karl S ^b   Endres, Frank ^c   MacFarlane, Douglas ^d   Abbott, Andrew P ^d  

^a UNIVERSITY OF OXFORD   (United Kingdom)

^b UNIVERSITY OF LEICESTER   (United Kingdom)

^c CLAUSTHAL UNIVERSITY OF TECHNOLOGY   (Germany)

^d MONASH UNIVERSITY   (Australia)

Author keywords

Counter electrode reactions; Electrodeposition; Impurities; Ionic liquids; Metal dissolution processes; Reference electrodes; Technical aspects

Indexed keywords

EID: 46149100150     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9783527622917.ch11     Document Type: Chapter

References (149)

1. Matsumoto, H. (2005) in Electrochemical Aspects of Ionic Liquids (ed. H. Ohno), John Wiley & Sons, Inc., New York, pp. 35-54
2. Liu, Q.X., El Abedin, S.Z., and Endres, F. (2006) Surf. Coat. Technol., 201, 1352-1356.
3. Abbott, A.P., Capper, G., Davies, D.L., Munro, H., Rasheed, R., and Tambyrajah, V. (2003) Ionic Liquids as Green Solvents: Progress and Prospects, ACS Symp. Ser., 439-452.
4. Jiang, T., Chollier Brym, M.J., Dube, G., Lasia, A., and Brisard, G.M. (2006) Surf. Coat. Technol., 201, 1-9.
5. Lin, Y-F. and Sun, I.W. (1999) Electrochim. Acta, 44, 2771-2777.
6. Zhao, Y. and VanderNoot, T.J. (1997) Electrochim. Acta, 42, 1639-1643.
7. Abbott, A.P., Capper, G., Davies, D.L., and Rasheed, R. (2004) Chem. Eur. J., 10, 3769.
8. Abbott, A.P., Capper, G., Davies, D.L., Rasheed, R.K., Archer, J., and John, C. (2004) Trans. Inst. Met. Finish., 82, 14.
9. Tabereaux, A.T. (1994) JOM, 42, 30-34.
10. Leber, B.P., Tabereaux, A.T., Marks, J., Lamb, B., Howard, T., Kantamaneni, R., Gibbs, M., Bakshi, V., and Dolin, E.J. (1998) in Light Metals, (ed. B.J. Welch), TMS, Warrendale PA, pp. 277-285.
11. (1989) The Canning Handbook, 23rd edn, E & F. N. Spoon Ltd., London.
12. M. Davis and T. Sandy (1992) in Handbook of Industrial Waste Treatment, (eds L.K. Wang and M.H.S. Wang), Marcel Dekker, New York,, pp. 127-171.
13. H. Figous and P.A. Jacquet (1930) French Patent No: 707526.
14. Berlouis, L.E.A. and Schiffrin, D.J. (1985) Trans. Inst. Met. Finish., 63, 52.
15. Alanis, I.L. and Schiffrin, D.J. (1979) Electrochim. Acta, 27, 837.
16. Pietrowski, O., Madore, C., and Landolt, D. (1998) J. Electrochem. Soc., 145, 2362.
17. Mohan, S., Kanagaraj, D., Sindhuja, R., Vijayalakshmi, S., and Renganathan, N.G. (2001) Trans. Inst. Met. Finish., 79, 140.
18. Landolt, D. (1987) Electrochim. Acta, 32, 1.
19. Abbott, A.P., Capper, G., Swain, B.G., and Wheeler, D.A. (2005) Trans. Inst. Met. Finish., 83, 51.
20. Grimm, R.D., West, A.C., and Landolt, D. (1992) J. Electrochem. Soc., 139, 1622.
21. Matlosz, M., Magaino, S., and Landolt, D. (1994) J. Electrochem. Soc., 141, 410.
22. Abbott, A.P., Capper, G., McKenzie, K.J., and Ryder, K.S. (2006) Electrochim. Acta, 51, 4420.
23. Abbott, A.P., Capper, G., McKenzie, K.J., and Ryder, K.S. (2006) Phys. Chem. Chem. Phys., 8, 4214.
24. Buzzeo, M.C., Evans, R.G., and Compton, R.G. (2004) Chem. Phys. Chem., 5, 1106-1120.
25. Endres, F. and Zein El Abedin, S. (2006) Phys. Chem. Chem. Phys., 8, 2101-2116.
26. Silvester, D.S. and Compton, R.G. (2006) Z. Phys. Chem., 220, 1247-1274.
27. Compton, R.G. and Sanders, G.H.W. (1996) Electrode Potentials, Oxford University Press, Oxford, UK.
28. Nernst, W. (1888) Z. Phys. Chem., 2, 613.
29. Albery, W.J. (1975) Electrode Kinetics, Clarendon Press, Oxford.
30. Kotyta, J., Dvorak, J., and Kavan, L. (1993) Principles of Electrochemistry, 2nd edn, John Wiley & Sons, Inc., New York.
31. Butler, J.N. (1970) Reference Electrodes in Aprotic Organic Solvents, John Wiley & Sons, Inc., New York.
32. Ives, D.J.G. and Janz, G.J. (1961) Reference Electrodes: Theory and Practice, Academic Press, New York.
33. Bard, A.J. and Faulkner, L.R. (2001) Electrochemical Methods: Fundamentals and Applications, John Wiley & Sons, Inc., New York.
34. Gritzner, G. and Kuta, J. (1982) Pure Appl. Chem., 54, 1527-1532.
35. Stojanovic, R.S. and Bond, A.M. (1993) Anal. Chem., 65, 56-64.
36. Hultgren, V.M., Mariotti, A.W.A., Bond, A.M., and Wedd, A.G. (2002) Anal. Chem., 74, 3151-3156.
37. Bhatt, A.I., Bond, A.M., MacFarlane, D.R., Zhang, J., Scott, J.L., Strauss, C.R., Iotov, P.I., and Kalcheva, S.V. (2006) Green Chem., 8, 161-171.
38. Zhang, J. and Bond, A.M. (2005) Analyst, 130, 1132-1147.
39. Brown, R.J.C., Dyson, P.J., Ellis, D.J., and Welton, T. (2001) Chem. Commun., 1862-1863.
40. Lagrost, C., Carrie, D., Vaultier, M., and Hapiot, P. (2003) J. Phys. Chem. A, 107, 745-752.
41. Damlin, P., Kvarnstrom, C., and Ivaska, A. (2006) J. Electroanal. Chem., 590, 190-197.
42. Ryan, D.M., Riechel, T.L., and Welton, T. (2002) J. Electrochem. Soc., 149, A371-A378.
43. Islam, M.M., Ferdousi, B.N., Okajima, T., and Ohsaka, T. (2005) Electrochem. Commun., 7, 789-795.
44. Sur, U.K., Marken, F., Coles, B.A., Compton, R.G., and Dupont, J. (2004) Chem. Commun., 2816-2817.
45. Zhang, D., Okajima, T., Matsumoto, F., and Ohsaka, T. (2004) J. Electrochem. Soc., 151, D31-D37.
46. Schröder, U., Wadhawan, J.D., Compton, R.G., Marken, F., Suarez, P.A.Z., Consorti, C.S., De Souza, R.F., and Dupont, J. (2000) New J. Chem., 24, 1009-1015.
47. Matsumoto, H., Matsuda, T., and Miyazaki, Y. (2000) Chem. Lett., 29, 1430-1431.
48. NuLi, Y., Yang, J., Wang, J.L., Xu, J.Q., and Wang, P. (2005) Electrochem. Solid State, 8, C166-C169.
49. Koch, V.R., Dominey, L.A., Nanjundiah, C., and Ondrechen, M.J. (1996) J. Electrochem. Soc., 143, 798-803.
50. Saheb, A., Janata, J., and Josowicz, M. (2006) Electroanalysis, 18, 405-409.
51. Matsumoto, K., Hagiwara, R., and Ito, Y. (2004) Electrochem. Solid State Lett., 7, 41-44.
52. Snook, G.A., Best, A.S., Pandolfo, A.G., and Hollenkamp, A.F. (2006) Electrochem. Commun., 8, 1405-1411.
53. Leone, A.M., Weatherby, S.C., Williams, M.E., Thorp, H.H., and Murray, R.W. (2001) J. Am. Chem. Soc, 123, 218-222.
54. Endres, F. and Freyland, W. (1998) J. Phys. Chem. B, 102, 10229-10233.
55. MacFarlane, D.R., Sun, J., Golding, J., Meakin, P., and Forsyth, M. (2000) Electrochim. Acta, 45, 1271-1278.
56. Borisenko, N., Zein El Abedin, S., and Endres, F. (2006) J. Phys. Chem. B, 110, 6250-6256.
57. Brooks, C.A. and Doherty, A.P. (2005) J. Phys. Chem. B, 109, 6276-6279.
58. Fuller, J., Carlin, R.T., and Osteryoung, R.A. (1997) J. Electrochem. Soc., 144, 3881-3886.
59. Silvester, D.S., Aldous, L., Lagunas, M.C., Hardacre, C., and Compton, R.G. (2006) J. Phys. Chem. B, 110, 22035-22042.
60. Sorahan, T. and Harrington, J.M. (2000) Occup. Environ. Med., 57, 385-389.
61. Stevens, K. (1997) Trans. Inst. Metal Finish., 75 (2), B33-B34.
62. Rousseau, A. and Benaben, P. (2002) Metal Finish., 100, 92-97.
63. Pearson, T. and Long, E. (1998) Trans. Inst. Metal Finish., 76, B83-B87.
64. Ibrahim, S.K., Watson, A., and Gawne, D.T. (1997) Trans. Inst. Metal Finish., 75, 181-188.
65. Abbott, A.P., Capper, G., McKenzie, K.J., and Ryder, K.S. (2006) J. Electroanal. Chem., in press.
66. Simanavicius, L. (1990) Chemija, 3-30.
67. Zhao, Y. and Vandernoot, T.J. (1997) Electrochim. Acta, 42, 3.
68. Abbott, A.P. and McKenzie, K.J. (2006) Phys. Chem. Chem. Phys., 8, 4265-4279.
69. Liu, Q.X., Zein El Abedin, S., and Endres, F. (2006) Surf. Coat. Technol., in press
70. Bockris, J. O'M. and Reddy, A.K.N. (1970) Modern Electrochemistry, Vol. 1, Plenum Press, New York, Chapter 6.
71. Xu, W., Cooper, E.I., and Angell, C.A. (2003) J. Phys. Chem. B, 107, 6170.
72. Cooper, E.I. and Angell, C.A. (1983) Solid State Ionics, 10, 617.
73. Abbott, A.P. (2004) Chem. Phys. Chem., 5, 1242.
74. Abbott, A.P. (2005) Chem. Phys. Chem., 6, 2404.
75. Cooper, E.I. and Angell, C.A. (1983) Solid State Ionics, 10, 617.
76. Xu, W. and Angell, C.A. (2003) Science, b, 422.
77. (1989) The Canning Handbook 23rd edn, E & F. N. Spoon Ltd., London.
78. Hirao, M., Sugimoto, H., and Ohno, H. (2000) J. Electrochem. Soc., 147, 4168;
79. Yoshizawa, M., Xu, W., and Angell, C.A. (2003) J. Am. Chem. Soc., 125, 15411.
80. Sun, J., Jordan, L.R., Forsyth, M., and MacFarlane, D.R. (2001) Electrochim Acta, 46, 1703;
81. Yamada, M. and Honma, I. (2003) Electrochim. Acta, 48, 2411.
82. Gale, R.J. and Osteryoung, R.A. (1980) Electrochim. Acta, 25, 1527.
83. Nanjundiah, C., McDevitt, S.F., and Koch, V.R. (1997) J. Electrochem. Soc., 144, 3392;
84. Nanjundiah, C., Goldman, J.L., McDevitt, S.F., and Koch, V.R. (1997) Proc. Electrochem. Soc., 96-25, 301.
85. Abbott, A.P., Capper, G., Davies, D.L., Rasheed, R.K., Archer, J., and John, C. (2004) Trans. Inst. Metal Finish., 82, 14.
86. Zein El Abedin, S., Farag, H.K., Moustafa, E.M.,Welz-Biermann, U., and Endres, F. (2005) Phys. Chem. Chem. Phys., 7, 2333.
87. Jastorff, B., Mölter, K., Behrend, P., Bottin-Weber, U., Filser, J., Heimers, A., Ondruschka, B., Ranke, J., Schaefer, M., Schröder, H., Slenzka, K., Stark, A., Stepnowski, P., Stock, F., Störmann, R., Stolte, S., Welz-Biermann, U., Ziegert, S., and Thöming, J. (2005) Strategy in evaluation of risk potential of ionic liquids-basis for an eco-design of sustainable products. Green Chem., 7, 362-372.
88. Chilyumova, E. and Thöming, J. (2006) Dynamic simulation of rinsing and regeneration networks based on high pressure RO. Desalination, 207, 45-58.
89. Thöming, J. (2002) Optimal design of zero-water discharge rinsing systems. Environ. Sci. Technol., 36 (5), 1107-1112.
90. Erol, P. and Thöming, J. (2006) ECO-optimization of pre-treatment processes in metal finishing. Comput. Chem. Eng., 30 (4), 587-598.
91. Fischwasser, K., Schwarz, R., and Suss, M. (2003) Material loss minimized process technology-When are regeneration and concentration units efficient? Chem. Ing. Tech., 75 (6), 781-786.
92. Vasudevan, S., Sozhan, G., Mohan, S., Balaji, R., Malathy, P., and Pushpavanam, S. (2007) Electrochemical regeneration of chromium containing solution from metal finishing industry. Ind. Eng. Chem. Res., 46 (9), 2898-2901.
93. Sanchez, E., Mestre, S., Perez-Herranz, V., and Garcia-Gabaldon, M. (2004) Ceramic membranes for continuous regeneration of spent chromium plating baths. Key Eng. Mater., 264-268, 2211-2214.
94. Huang, K.L., Holsen, T.M., Chou, T.C., and Selman, J.R. (2003) Comparing nafion and ceramic separators used in electrochemical purification of spent chromium plating solutions: Cationic impurity removal and transport. Environ. Sci. Technol., 37 (9), 1992-1998.
95. Jegadeesan, G., Mondal, K., and Lalvani, S.B. (2005) Iron removal and simultaneous regeneration of hexavalent chromium in spent plating solutions. J. Electrochem. Soc., 152 (2), D26-D33.
96. Huang, K.L., Holsen, T.M., Chou, T.C., and Yang, M.C. (2004) The use of air fuel cell cathodes to remove contaminants from spent chromium plating solutions. Environ. Technol., 25 (1), 39-49.
97. Huang, K.L., Holsen, T.M., Selman, J.R., and Chou, T.C. (2005) The electrochemical characteristics of air fuel cell electrodes used in an electrolytic system for spent chromium plating solution regeneration. Journal of power sources, 142 (1-2), 243-252.
98. Gyliene, O., Aikaite, J., Tarozaite, R., Dolgov, and I.A. (2004) Regeneration and decontamination of a nickel citrate complex in spent electroless nickel plating solutions. Trans. Inst. Met. Finish., 82 (1-2), 33-37.
99. Xu, T.W. and Yang, W.H. (2004) Tuning the diffusion dialysis performance by surface cross-linking of PPO anion exchange membranes-simultaneous recovery of sulfuric acid and nickel from electrolysis spent liquor of relatively low acid concentration. J. Hazardous Mater., 109 (1-3), 157-164.
100. Pierard, J., Paquay, E., and Degrez, M. (2002) Recycling by electrodialysis: from lab to industrial applications. Desalination, 149 (1-3), 393-398.
101. Chang, C.F., Chang, C.Y., Tsai, W.T., and Wu, S.C. (2000) Adsorption equilibrium of polyethylene glycol in the copper electroplating solution on activated carbon. J. Colloid Interface Sci., 232 (1), 207-209.
102. Ozdemir, T., Oztin, C., and Kincal, N.S. (2006) Treatment of waste pickling liquors: Process synthesis and economic analysis. Chem. Eng. Commun., 193 (5), 548-563.
103. Bolger P.T. and Szlag, D.C. (2002) Electrochemical treatment and reuse of nickel plating rinse waters. Eviron. Prog., 21 (3), 203-208.
104. Juang, R.S., Kao, H.C., and Liu, F.Y. (2006) Ion exchange recovery of Ni(II) from simulated electroplating waste solutions containing anionic ligands. Journal of Hazardous Materials, 128 (1), 53-59.
105. Plokhov, S., Matasova, I., Utkin, V., and Vodzinskii, V. (2002) Specific features of ion-exchange zinc(II) extraction from washing water of zinc plating. Russ. J. Appl. Chem., 75 (6), 950-953.
106. Agrawal, A., Kumar, V., and Pandey, B. (2006) Remediation options for the treatment of electroplating and leather tanning effluent containing chromium-A review. Miner. Proc. Extractive Metall. Rev., 2, 99-130.
107. Eom, T.H., Lee, C.H., Kim, J.H., and Lee, C.H. (2005) Development of an ion exchange system for plating wastewater treatment. Desalination, 180 (1-3), 163-172.
108. Katsumata, H., Kaneco, S., Inomata, K., Itoh, K., Funasaka, K., Masuyama, K., Suzuki, T., and Ohta, K. (2003) Removal of heavy metals in rinsing wastewater from plating factory by adsorption with economical viable materials. J. Environ. Man., 69 (2), 187-191.
109. Wong, F.S., Qin, J.J., Wai, M.N., Lim, A.L., and Adiga, M (2002) A pilot study on a membrane process for the treatment and recycling of spent final rinse water from electroless plating. Sep. Purif. Technol., 29 (1), 41-51.
110. Schmidt, B., Wolters, R., Kaplin, J., Schneiker, T., Lobo-Recio, M.A., López, F., López-Delgado, A., and Alguacil, F.J. (2007) Rinse water regeneration in stainless steel pickling. Desalination, 211 (1-3), 64-71.
111. Chaudhary, A., Ganguli, B., and Grimes, S. (2006) The regeneration and recycle of chromium etching solutions using concentrator cell membrane technology. Chemosphere, 62 (5), 841-846.
112. Frenzel, I., Holdik, H., Stamatialis, D.F., Pourcelly, G., and Wessling, A. (2005) Chromic acid recovery by electro-electrodialysis-I. Evaluation of anion-exchange membrane. J. Membr. Sci., 261 (1-2), 49-57.
113. Singh, R., Khwaja, A., Gupta, B., and Tandon, S. (1999) Extraction and separation of nickel(II) using bis(2,4,4-trimethylpentyl) dithiophosphinic acid (Cyanex 301) and its recovery from spent catalyst and electroplating bath residue. Solv. Extraction Ion Exch., 17 (2), 367-390.
114. Malinowska, B., Rakib, M., and Durand, G. (2001) Ammonia recycling and cadmium confinement in chemical bath deposition of CdS thin layers. Prog. Photovoltaics, 9 (5), 389-404.
115. Malinowska, B., Rakib, M., and Durand, G. (2002) Cadmium recovery and recycling from chemical bath deposition of CdS thin layers. Progr. Photovoltaics, 10 (3), 215-228.
116. Liu, C., Fu, Y., and Lin, C. (2007) Ni-Cu-Zn Ferrite Powder Prepared from Steel Pickled Liquor and Electroplating Waste Solutions. Jpn. J. Appl. Phys., 46 (3A), 1006.
117. Zhang, J. and Bond, A. (2005) Practical considerations associated with voltammetric studies in room temperature ionic liquids. Analyst, 130 (8), 1132-1147.
118. Waterkamp, D., Heiland, M., Schlüter, M., Sauvageau, J.C., Beyersdorff, T., and Thöming, J. (2007) Synthesis of Ionic Liquids in Micro-Reactors-A Process Intensification Study. Green Chem., DOI:10.1039/B616882E.
119. Scott, J., MacFarlane, D.R., Raston, C., and Teoh, C. (2000) Clean, efficient syntheses of cyclotriveratrylene (CTV) and tris-(O-allyl)CTV in an ionic liquid. Green Chem., 2, 123-126.
120. Zulfiqar, F. and Kitazume, T. (2000) Lewis acid-catalysed sequential reaction in ionic liquids. Green Chem., 2, 296-297.
121. Kamal, A. and Chouhan, G. (2004) Investigations towards the chemoselective thioacetalization of carbonyl compounds by using ionic liquid [bmim]Br as a recyclable catalytic medium. Adv. Synth. Catal., 346 (5), 579-582.
122. Park, J., Sreekanth, P., and Kim, B. (2004) Recycling chiral imidazolidin-4-one catalyst for asymmetric Diels-Alder reactions: Screening of various ionic liquids. Adv. Synth. Catal., 346 (1), 49-52.
123. Wasserscheid, P., Hilgers, C., and Keim, W. (2004) Ionic liquids-weakly-coordinating solvents for the biphasic ethylene oligomerization to alpha-olefins using cationic Ni-complexes. J. Mol. Catal. A-Chem., 214 (1), 83-90.
124. Wong, H., Pink, C., Ferreira, F., and Livingston, A. (2006) Recovery and reuse of ionic liquids and palladium catalyst for Suzuki reactions using organic solvent nanofiltration. Green Chem., 8, 373-379.
125. Zhou, L. and Wang, L. (2006) Functionalized Ionic Liquid as an Efficient and Recyclable Reaction Medium for Phosphine-Free Palladium-Catalyzed Heck Reaction. Synthesis, 2653-2658, DOI: 10.1055/s-2006-942466.
126. Song, G., Cai, Y., and Peng, Y. (2005) Amino-functionalized ionic liquid as a nucleophilic scavenger in solution phase combinatorial synthesis. J. Comb. Chem., 7, 561-566.
127. Appetecchi, G., Scaccia, S., Tizzani, C., Alessandrini, F., and Passerini, S. (2006) Synthesis of Hydrophobic Ionic Liquids for Electrochemical Applications. J. Electrochem. Soc., 153 (9), A1685-A1691.
128. Schäfer, T., Rodrigues, C.M., Afonso, C.A.M., and Crespo, J.G. (2001) Selective recovery of solutes from ionic liquids by pervaporation-a novel approach for purification and green processing. Chem. Commun., 1622-1623.
129. Nockemann, P., Binnemanns, K., and Driesen, K. (2005) Purification of imidazolium ionic liquids for spectroscopic applications. Chem. Phys. Lett., 415, 131-136.
130. McFarlane, J., Ridenour, W., Luo, H., Hunt, R., DePaoli, D., and Ren, R. (2005) Room temperature ionic liquids for separating organics from produced water. Sep. Sci. Technol., 40 (6), 1245-1265.
131. Abbott, A., Capper, G., Davies, D., Rasheed, R., and Tambyrajah, V. (2002) Quaternary ammonium zinc-or tin-containing ionic liquids: water insensitive, recyclable catalysts for Diels-Alder reactions. Green Chem., 4, 24-26.
132. Han, S., Wong, H., and Livingston, A. (2005) Application of organic solvent nanofiltration to separation of ionic liquids and products from ionic liquid mediated reactions. Trans. Inst. Chem. Eng., 83 (A3), 309-316.
133. Gordon, C.M. (2003) Synthesis of ionic liquids in Ionic Liquids in Synthesis, Wiley-VCH, Verlag GmbH, p. 21.
134. Farmer V. and Welton, T. (2002) The oxidation of alcohols in substituted imidazolium ionic liquids using ruthenium catalysts. Green Chem., 4, 97-102.
135. Burrell, A., Del Sesto, R., Baker, S., McCleskey, T., and Baker, G. (2007) The large scale synthesis of pure imidazolium and pyrrolidinium ionic liquids. Green Chem., 9, 449-454.
136. Earle, M., Gordon, C., Plechkova, M., Seddon, K., and Welton, T. (2007) Decolorization of ionic liquids for spectroscopy. Anal. Chem., 79, 758-764.
137. Li, Z., Du, Z., Gu, Y., Zhu, L., Zhang, X., and Deng, Y. (2006) Environmentally friendly and effective removal of Br-and Cl-impurities in hydrophilic ionic liquids by electrolysis and reaction. Electrochem. Commun., 8, 1270-1274.
138. Yang, Q. and Dionysiou, D. (2005) Room temperature ionic liquids as solvent media for the photolytic degradation of environmentally important organic contaminants. Ionic liquids IIB: Fundamentals, Progress, Challenges and Opportunities: Transformations and Processes. ACS Symp. Ser., 902, 182-198.
139. Gan, Q., Xue, M., and Rooney, D. (2006) A study of fluid properties and microfiltration characteristics of room temperature ionic liquids [C10-min][NTf2] and N8881[NTf2] and their polar solvent mixtures. Sep. Purif. Technol., 51 (2), 185-192.
140. Kröckel, J. and Kragl, U. (2003) Nanofiltration for the separation of non-volatile products from solutions containing ionic liquids. Chem. Eng. Technol., 26, 1166-1168.
141. Moustafa, E., Zein El Abedin, S., Shkurankov, A., Zschippang, E., Saad, A., Bund, A., and Endres, F. (2007) Electrodeposition of Al in 1-Butyl-1-methylpyrrolidinium Bis(trifluoromethylsulfonyl)amide and 1-Ethyl-3-methylimidazolium Bis(trifluoromethylsulfonyl)amide Ionic Liquids: In Situ STM and EQCM Studies. J. Phys. Chem. B, 111, 4693-4704.
142. Zein El Abedin, S., Moustafa, E., Natter, H., Hempelmann, R., and Endres, F. (2005) Additive free electrodeposition of nanocrystalline aluminium in a water and air stable ionic liquid. Electrochem. Commun., 7, 1116.
143. Seddon, Kenneth R., Stark, Annegret, and Torres, M-J. (2000) Pure Appl. Chem., 72 (12), 2275-2228.
144. Howlett, P.C., Izgorodina, E.I., Forsyth, M., and MacFarlane, R. (2006) Z. Phys. Chem., 220, 1483.
145. Abbott, A.P., Eardley, C.A., Farley, N.S., and Pratt, A. (1999) Trans. Inst. Metal Finish., 77, 26.
146. Abbott, A.P., Qiu, F., and Ryder, K.S. (in press).
147. Endres, F., Zein El Abedin, S., and Borissenko, N. (2006) Z. Phys. Chem., 220, 1377.
148. Passerini, S., lecture on the COIL-2 presymposium, 4 August 2007 Yokohama, Japan
149. Kaper, H., Endres, F., Djerdj, I., Antonietti, M., Smarsly, B., Maier, J., and Hu, Y.-S., Small, DOI: 10.1002/smll.200700138