An Experimental Study of Oil-Lubricated Journal Bearings Undergoing Oscillatory Motion

Journal of Tribology

Volumn 130, Issue 2, 2008, Pages 1-7

  Lu, Xiaobin ^a   Khonsari, M M ^a  

^a LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

Friction hysteresis; Journal bearing; Oil lubricated; Oscillatory

Indexed keywords

EXPERIMENTAL STUDIES; HYDRODYNAMIC REGIME; INLET TEMPERATURE; LUBRICANT FLOW; LUBRICATED JOURNAL BEARINGS; OIL-LUBRICATED; OSCILLATING FREQUENCIES; OSCILLATORY MOTION;

FRICTION; JOURNAL BEARINGS; TRIBOLOGY;

HYSTERESIS;

EID: 46049084877     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.2908907     Document Type: Article

References (39)

1. Sampson, J. B., Morgan, F., Reed, D. W., and Muskat, M., 1943, "Study in Lubrication, XII, Friction Behavior During the Slip Portion of the Stick-Slip Process," J. Appl. Phys., 14(12), pp. 689-700.
2. Bell, R., and Burdekin, M., 1966, "Dynamic Behavior of Plain Slideways," Proc. Inst. Mech. Eng., 181(1), pp. 169-181.
3. Bell, R., and Burdekin, M., 1969, "A Study of the Stick-Slip Motion of Machine Tool Feed Drives," Proc. Inst. Mech. Eng., 184(1), pp. 543-557.
4. Bell, R., and Burdekin, M., 1969, "An Investigation into the Steady-State Characteristics of Plain Slideways," Proc. Inst. Mech. Eng., 184(1), pp. 1075-1087.
5. Dahl, P. R., 1968, "A Solid Friction Model," TOR0158 (3107-18)-1, Aerospace Corporation, El Segundo, CA, May.
6. Dahl, P. R., 1976, "Solid Friction Damping of Mechanical Vibrations," AIAA J., 14(12), pp. 1675-1682.
7. Dahl, P. R., 1977, "Measurement of Solid Friction Parameters of Ball Bearings," Proceedings of the Sixth Symposium on Incremental Motion Control Systems and Devices, May 24-27, pp. 1910-1914.
8. Fleischer, G., Gröger, H., and Thum, H., 1980, Verschleiss und Zuverlässigkeit, VEB Verlag Technik, Berlin.
9. Todd, M. J., and Johnson, K. L., 1987, "A Model for Coulomb Torque Hysteresis in Ball Bearings," Int. J. Mech. Sci., 29(5), pp. 339-354.
10. Armstrong-Helouvry, B., 1994, "Survey of Models, Analysis Tools and Compensation Methods for the Control of Machines With Friction," Automatica, 30(7), pp. 1083-1138.
11. Dupont, P. E., and Dunlap, E. P., 1995, "Friction Modeling and PD Compensation at Very Low Velocities," J. Dyn. Syst., Meas., Control, 117(1), pp. 8-14.
12. Yang, C.-R., Lee, R.-T., and Chiou, Y.-C., 1997, "Study on Dynamic Friction Characteristics in Reciprocating Friction Drive System," Tribol. Int., 30(10), pp. 719-731.
13. Van De Velde, F., De Baets, P., and Degreck, J., 1998, "The Friction Force During Stick-Slip With Velocity Reversal," Wear, 216(2), pp. 138-149.
14. Hess, D. P., and Soom, A., 1990, "Friction at a Lubricated Line Contact Operating at Oscillating Sliding Velocities," J. Tribol., 112(1), pp. 147-152.
15. Hess, D. P., 1997, "Apparent Multi-Valued Friction in Lubricated Contact Systems From Tangential Dynamics," J. Tribol., 119(4), pp. 632-636.
16. Polycarpou, A. A., and Soom, A., 1995, "Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part I-System Model," J. Tribol., 117(2), pp. 255-260.
17. Polycarpou, A. A., and Soom, A., 1995, "Boundary and Mixed Friction in the Presence of Dynamic Normal Loads: Part II-Friction Transients," J. Tribol., 117(2), pp. 261-266.
18. Polycarpou, A. A., and Soom, A., 1995, "Two Dimensional Models of Boundary and Mixed Friction at a Line Contact," J. Tribol., 117(1), pp. 178-184.
19. Harnoy, A., and Rachoor, H., 1993, "Angular-Compliant Hydrodynamic Bearing Performance Under Dynamic Loads," J. Tribol., 115(3), pp. 342-347.
20. Harnoy, A., and Friedland, B., 1994, "Dynamic Friction Model of Lubricated Surfaces for Precise Motion Control," Tribol. Trans., 37(3), pp. 608-614.
21. Harnoy, A., Friedland, B., Semenock, R., Rachoor, H., and Aly, A., 1994, "Apparatus for Empirical Determination of Dynamic Friction," Proceedings of the American Control Conference, Baltimore, MD, Jun., pp. 546-550.
22. Harnoy, A., Friedland, B., Semenock, R., and Rachoor, H., 1994, "Modeling and Simulation of Elastic and Friction Forces in Lubricated Bearings for Precise Motion Control," Wear, 172, pp. 155-165.
23. Rachoor, H., 1996, "Investigation of Dynamic Friction in Lubricated Surfaces," Ph.D. thesis, New Jersey Institute of Technology, Newark, NJ.
24. Lu, X. B., and Khonsari, M. M., 2005, "On the Lift-Off Speed in Journal Bearings," Tribol. Lett., 20(4), pp. 299-305.
25. Lu, X. B., and Khonsari, M. M., 2007, "An Experimental Study of Grease-Lubricated Journal Bearings Undergoing Oscillatory Motion," J. Tribol., 129(3), pp. 640-646.
26. Haessig, D. A., Jr., and Friedland, B., 1991, "On the Modeling and Simulation of Friction," J. Dyn. Syst., Meas., Control, 113(3), pp. 354-362.
27. Armstrong-Helouvry, B., 1989, "Control of Machine With Non-Linear Low-Velocity Friction: A Dimensional Analysis," Experimental Robotics I: The First International Symposium, Montreal, Jun. 19-21, pp. 180-195.
28. Armstrong-Helouvry, B., 1991, Control of Machines With Friction, Kluwer, New York.
29. de Wit, C. C., Olsson, H., Åström, K. J., and Lischinsky, P., 1993, "Dynamic Friction Models and Control Design," Proceedings of the American Control Conference, San Francisco, CA, Jun., pp. 1920-1926.
30. de Wit, C. C., Olsson, H., Åström, K. J., and Lischinsky, P., 1995, "A New Model for Control of Systems With Friction," IEEE Trans. Autom. Control, 40(3), pp. 419-425.
31. Olsson, H., Åström, K. J., de Wit, C. C., Gäfvert, M., and Lischinsky, P., 1998, "Friction Models and Friction Compensation," Eur. J. Control, 4(3), pp. 176-195.
32. Berger, E. J., 2002, "Friction Modeling for Dynamic System Simulation," Appl. Mech. Rev., 55(6), pp. 535-577.
33. Tabor, D., 1964, "Friction and Wear," Proceedings of International Symposium on Lubrication and Wear, pp. 701-761.
34. Salehi, M., and Heshmat, H., 2001, "Frictional Dampers Dynamic Characterization-Theory and Experiments," Boundary and Mixed Lubrication: Science and Applications, The 28th Leed-Lyon Symposium on Boundary and Mixed Lubrication, Sept. 3-7, Elsevier Science, New York, pp. 515-526.
35. Rabinowicz, E., 1951, "The Nature of the Static and Kinetic Coefficient of Friction," J. Appl. Phys., 22(11), pp. 1373-1379.
36. Glaeser, W. A., 1977, "Operating Limitations of Heavily Loaded Grease-Lubricated Cast Bronze Bearings," ASLE Trans., 20(4), pp. 309-314.
37. Glaeser, W. A., and Dufrane, K. F., 1978, "New Design Methods for Boundary-Lubricated Sleeve Bearings," Mach. Des., 50(8), pp. 207-213.
38. Berthier, Y., and Play, D., 1982, "Wear Mechanisms in Oscillating Bearings," Wear, 75(2), pp. 369-387.
39. Pavelescu, D., and Tudor, A., 1987, "The Sliding Friction Coefficient-Its Evolution and Usefulness," Wear, 120(3), pp. 321-326.