Experimental and numerical study of spouted bed fluid dynamics

Brazilian Journal of Chemical Engineering

Volumn 25, Issue 1, 2008, Pages 95-107

  Duarte, C R ^a   Murata, V V ^a   Barrozo, M A S ^a  

^a FEDERAL UNIVERSITY OF UBERLÂNDIA   (Brazil)

Author keywords

Computational fluid dynamics; Eulerian granular multiphase model; Spouted bed

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; FLUIDIZATION; FLUIDIZED BEDS; PARTICLES (PARTICULATE MATTER); VELOCITY CONTROL;

COARSE PARTICLES; COMPUTATIONAL WORK; EULERIAN GRANULAR MULTIPHASE MODEL; EXPERIMENTAL AND NUMERICAL STUDIES; GAS-SOLID FLOWS; PARTICLE VELOCITIES; SIMULATED RESULTS; SPOUTED BED;

FLUID DYNAMICS;

EID: 45949088563     PISSN: 01046632     EISSN: None     Source Type: Journal    
DOI: 10.1590/S0104-66322008000100011     Document Type: Article

References (40)

1. Benkrid, A. and Caram, H. S., Solid Flow in the Annular Region of a Spouted Bed, AIChE Journal, Vol. 35, pp. 1328-1336 (1989).
2. Bilbao, J., Olazar, M., Romero, A. and Arandes, J. M., Design and Operation of a Jet Spouted Bed Reactor with Continuous Catalyst Feed in the Benzyl Alcohol Polymerization, Ind. Eng. Chem. Res., 26, pp. 1297-1304 (1987).
3. Chatterjee, A., Effect of Particle Diameter and Apparent Particle Density on Internal Solid Circulation Rate in Air Spouted Beds, Ind. Engng Chem. Process Des. Dev., Vol. 9, pp. 531-540, (1970).
4. Cheng, Y., Wei, F., Guo, Y. and Jin, Y., CFD Simulation of Hydrodynamics in the Entrance Region of a Downer, Chemical Engineering Science, Vol. 56, Issue 4, pp. 1687-1696 (2001).
5. Chiesa, M., Mathiesen,V., Melheim, J. A. and Halvorsen, B., Numerical Simulation of Particulate Flow by the Eulerian-Lagrangian and the Eulerian-Eulerian Approach with Application to a Fluidized Bed, Computers and Chemical Engineering, Vol. 29, pp. 291-304 (2005).
6. Du, W., Bao, X., Xu, J. and Wei, W., Computational Fluid Dynamics (CFD) Modeling of Spouted Bed; Assessment of Drag Coefficient Correlations, Chemical Engineering Science, Vol. 61, pp. 1401-1420(2006).
7. th International Drying Symposium, pp. 581-588 (2004).
8. Ergun, S., Fluid Flow Through Packed Columns, Chem. Eng. Prog., Vol. 48(2), pp. 89-94 (1952)
9. Gidaspow, D., Multiphase Flow and Fluidization, Academic Press, San Diego (1994).
10. th Engineering Foundation Conference on Fluidization, pp. 75-82 (1992).
11. Gómez, L. C. and Milioli, F. E., Collisional Solid's Pressure Impact on Numerical Results from a Traditional Two-Fluid Model, Powder Technology, Vol. 149, Issues 2-3, pp. 78-83 (2005).
12. He, Y. L., Lim, C. J., Grace, J. R. and Zhu, J. X., Measurements of Voidage Profiles in Spouted Beds, Canadian Journal of Chemical Engineering, Vol. 72,pp.229-234(1994).
13. Kawaguchi, T., Sakamoto, M. and Tsuji, T. T., Quasi-Three-Dimensional Numerical Simulation of Spouted Beds in Cylinder, Powder Technology, Vol. 109, pp. 3-12 (2000).
14. Kim, S. J. and Cho, S. Y., Particle Velocity and Circulation Rate in Liquid Spouted Beds, Korean. J. Chem. Engng. Vol. 8, pp. 131-136 (1991).
15. Lefroy, G. A. and Davidson, J. F., The Mechanism of Spouted Beds, Transactions of the Institution of Chemical Engineers, Vol. 47, pp.120-128 (1969).
16. Lim, C. J. and Mathur, K, B., Modelling of Particle Movement in Spouted Beds, In Fluidization, eds J. F. Davidson and D. L. Keairns, Cambridge University Press, Cambridge, pp. 104-109 (1978).
17. Lun, C. K. K., Savage, S.B. and Jeffrey, D.J., Kinetic Theories for Granular Flow: Inelastic Particles in Couette Flow and Slightly Inelastic Particles in General Flow Field, Journal of Fluid Mechanics, Vol. 140, pp. 223-256 (1984).
18. Mathur, K. B. and Epstein, N., Spouted Beds, Academic Press Inc. LTD., New York, 304p. (1974).
19. Mathur, K. B. and Gishler, N., A Technique for Contacting Gases with Coarse Solid Particles, AIChE Journal, Vol. 1, pp.157-164 (1955).
20. Morgan, M. H., Day, J. Y. and Liftman, H., Spout Voidage Distribution, Stability and Particle Circulation Rates in Spouted Beds of Coarse Particles, I. Theory. Chem. Engng. Sci., Vol. 40, pp. 1367-1377(1985).
21. Olazar, M., San José, M. J., Lamosas, R. and Bilbao, J., Hydrodynamics of Sawdust and Mixtures of Wood Residues in Conical Spouted Beds, Ind. Engng. Chem. Res. 33, pp. 993-1000 (1994a).
22. Olazar, M., San Joś, M. J., Zabala, G. and Bilbao, J., A New Reactor in Jet Spouted Bed Regime for Catalytic Polymerizations, Chem. Engng. Sci., Vol. 49, pp. 4579-4588 (1994b).
23. Olazar, M., San Jose, M. J., Aguayo, A. T., Arandes, J. M. and Bilbao, J., Stable Operation Conditions for Gas-Solid Contact Regimes in Conical Spouted Beds, Ind. Engng. Chem. Res. 31, pp. 1784-1791(1992).
24. Olazar, M., San José, M. J., Izquierdo, M. A., Salazar, A. O. and Bilbao, J., Effect of Operation Conditions on Solid Velocity In Spout, Annulus and Fountain of Spouted Beds, AIChE Journal, Vol. 56, pp.3585-3594 (2001).
25. Randelman, R., Benkrid, A. and Caram, H. S., Investigation of the Solid Flow Pattern in a Spouted Bed, A.I.Ch.E. Symp. Ser. 83, pp. 23-28 (1987).
26. Roy, D., Larachi, F., Legros. R. and Chaouki, J., A Study of Solid Behavior in Spouted Beds Using 3-D Particle Tracking, The Canadian Journal of Chemical Engineering, Vol. 72, pp. 945-952 (1994).
27. San José, M. J., Alvarez, S., Salazar, A. O., Olazar, M. and Bilbao, J., Influence of the Particle Diameter and Density in the Gas Velocity in Jet Spouted Beds, Chemical Engineering and Processing, Vol. 44, Issue 2, pp. 153-157 (2005a).
28. San José, M. J., Olazar, M., Alvarez, O., Morales, A. and Bilbao, J., Local Porosity in Conical Spouted Beds Consisting of Solids of Varying Density, Chemical Engineering Science, Vol. 60, Issue 7, pp. 2017-2025 (2005b).
29. San José, M. J., Olazar, M., Alvarez, S. and Bilbao, J., Local Bed Voidage in Conical Spouted Beds, Ind. Engng. Chem. Res., Vol. 37, pp. 2553-2558 (1998).
30. Shintaro, T., Wang, S., and Rhodes, M., Discrete Element Simulation of a Flat-Bottomed Spouted Bed in the 3-D Cylindrical Coordinate System, Chemical Engineering Science, Vol. 59, pp. 3495 - 3504 (2004).
31. Syamlal, M. and O'Brien, T. J., Computer Simulation of Bubbles in a Fluidized Bed, AIChE Symp. Series, Vol. 85, pp. 22-31 (1989).
32. Taghipour, F., Ellis, N. and Wong, C., Experimental and Computational Study of Gas-Solid Fluidized Bed Hydrodynamics, Chemical Engineering Science,Vol. 60, pp. 6857-6867 (2005).
33. Thorley, B., Saunby, J. B., Mathur, K. B. and Osberg, G. L., An Analysis of Air and Solids Flow in a Spouted Wheat Bed. Can. J. Chem. Engng., Vol. 37, pp.184-192 (1959).
34. Tsuji, T., Hirose, M., Shibata, T., Uemaki, O. and Itoh, H., Particle Flow in Annular Region of a Flat-Bottomed Spouted Bed, Transactions of the Society of Chemical Engineers, Japan 23-4, pp. 604-605 (1997).
35. Uemaki, O., Yamada, R. and Kugo, M., Particle Segregation in a Spouted Bed of Binary Mixtures. Can. J. Chem. Eng., Vol. 61, pp.303-307 (1983).
36. Van Velzen, D., Flamm, H. J., Langenkamp, H, and Casile, A., Motion of Solids in Spouted Beds, Canadian Journal of Chemical Engineering, Vol. 52, pp. 156-161(1974).
37. Volpicelli, G., Raso, G. and Massimilla, L., Gas and Solid- Flow in Bidimensional Spouted Beds, Proceedings of the International Symposium on Fluidization, ed. A. A. H. Drinkenburg, pp. 123-133 (1967).
38. Waldie, B. and Wilkinson, D., Measurement of Particle Movement in a Spouted Bed Using a New Microprocessor Based Technique. Can. J. Chem. Engng.,Vol. 64, pp. 944-949 (1986).
39. Wang, Z. G., Bi, H. T. and Lim, C. J., Particle Interlocking in Conical Spouted Beds Chemical Engineering Science, Vol. 60, pp. 5276-5283 (2005).
40. Wen, C. Y. and Yu, Y. H., Mechanics of Fluidization, Chem. Eng. Prog. Symp. Series, Vol. 62, pp. 100-111(1966).