An overview of electromagnetic compatibility challenges in European Rail Traffic Management System

Transportation Research Part C: Emerging Technologies

Volumn 16, Issue 5, 2008, Pages 515-534

  Midya, Surajit ^a   Thottappillil, Rajeev ^a  

^a UPPSALA UNIVERSITY   (Sweden)

Author keywords

Arc discharges; Electromagnetic compatibility; Electromagnetic interference; European Rail Traffic Management System; Rail transportation; Rail transportation communication

Indexed keywords

ELECTRIC DISCHARGES; ELECTROMAGNETIC PULSE; ELECTROMAGNETIC WAVE INTERFERENCE; RAILROAD TRAFFIC CONTROL; RAILROAD TRANSPORTATION; RAILROADS; RAILS; SIGNAL INTERFERENCE;

ARC DISCHARGE; CONDUCTED INTERFERENCES; CROSS-COUNTRY OPERATIONS; ELECTROMAGNETIC INTERFERENCE AND COMPATIBILITY; EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEMS; OPERATIONAL PRINCIPLES; RAIL TRANSPORTATION; SYSTEM DESIGN AND PERFORMANCE;

ELECTROMAGNETIC COMPATIBILITY;

ELECTROMAGNETIC FIELD; PUBLIC TRANSPORT; RAILWAY TRANSPORT; TRAFFIC MANAGEMENT; TRANSPORTATION TECHNOLOGY;

EURASIA; EUROPE;

EID: 45849131695     PISSN: 0968090X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.trc.2007.11.001     Document Type: Review

References (67)

1. Allan, J., Chan, W., Shaoz, Z., Mellitt, B., 1993. Low frequency and radio frequency electromagnetic compatibility for rapid transit railways. In: Proceedings of the Fifth European Conference on Power Electronics and Applications, Brighton, UK, September, pp. 106-111.
2. Aoki N., Satoh K., and Nabae A. Damping circuit to suppress motor terminal overvoltage and ringing in PWM inverter-fed AC motor drive systems with long motor leads. IEEE Trans. Ind. Applicat. 35 (1999) 1014-1020
3. Bartlett, E.J., Vaughan, M., Moore, P.J., 1999. Investigation into electromagnetic emissions from power system arcs. In: Proceedings of the 1999 International Conference and Exhibition on Electromagnetic Compatibility, EMC York, York, UK, July, pp. 47-52.
4. Bhattacharya S., Resta L., Divan D.M., and Novotny D.W. Experimental comparison of motor bearing currents with PWM hard and soft switched voltage source inverters 14 (1999) 552-562
5. Bloomfield, R., 2006. Fundamentals of European rail traffic management system - ERTMS. In: Proceedings of the 11th IET Professional Development Course on Railway Signalling and Control Systems, June, pp. 165-184.
6. Bormann, D., 2003. Origin of DC component in railway line current upon operation with iced-over overhead line: theory, experimental results and conclusions. ABB Internal Report of the project: Investigation of DC Current because of Ice on Contact wire, Ref. No: SECRC/PT/TR-2003/038, May.
7. Bormann, D., Midya, S., Thottappillil, R., 2007. DC components in pantograph arcing: mechanisms and influence of various parameters. In: Proceedings of 18th International Zurich Symposium on Electromagnetic Compatibility. Munich, Germany, September, pp. 369-372.
8. Bourne, A., Bradshaw, J., Lalies, A., Price, P., 2003. Managing electromagnetic compatibility on the london underground system. In: Proceedings of the IEE EMC Assurance in a Railway Environment, September, pp. 1-11.
9. Brillante, S., Ferrari, P., Pozzobon, P., 1998. Modelling of electromagnetic emission from catenary-pantograph pliding contact. In: Proceedings of the International Conference on Computer Aided Design, Manufacture and Operation in The Railway and Other Advanced Mass Transit Systems, Lisbon, Portugal, September, pp. 881-890.
10. Buhrkall L. Ice on the Overhead Line, AC Railway Systems: Analysis of the Ice Recordings (2002), The ESC User Group OHL Ice Working Group August
11. Buhrkall, L., 2003a. Ice on the overhead line of AC electrified railways. Summary Report From the OHL Ice Team, November.
12. Buhrkall L. Ice on the Overhead Line of AC Electrified Railways: Conclusions from the OHL Ice Team (2003), The OHL Ice Working Group June
13. Buhrkall L. DC components due to ice on the overhead contact wire of AC electrified railways. Electrische Bahnen 103 8 (2005) 380-389
14. Busse, D., Erdman, J., Kerkman, R.J., Schlegel, D., Skibinski, G., 1995. Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems. In: Proceedings of the 21st IEEE International Conference on Industrial Electronics, Control, and Instrumentation (IECON), vol. 1, Orlando, FL, USA, November, pp. 698-705.
15. Chen, C., 2000. Characterizing the generation and coupling mechanisms of electromagnetic interference noise from an electric vehicle traction drive up to microwave frequencies. In: Proceedings of the Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition, APEC, vol. 2, New Orleans, LA, USA, February, pp. 1170-1176.
16. de Tillere, D.G., Emery, D., Curchod, A., 2003. Managing systemic innovations in rail systems: the case of ertms technology. In: Proceedings of the 3rd Swiss Transport Research Conference, Monte Verita, Switzerland, March, pp. 1-21.
17. Erdman J., Kerkman R., Schlegel D., and Skibinski G. Effect of PWM inverters on AC motor bearing currents and shaft voltages. IEEE Trans. Ind. Applicat. 32 (1996) 250-259
18. Galdi, V., Ippolito, L., Piccolo, A., 1998. Arcing in AC railways: a mathematical approach. In: Proceedings of the International Conference on Computer Aided Design, Manufacture and Operation in The Railway and Other Advanced Mass Transit Systems, Lisbon, Portugal, September, pp. 891-904.
19. Giannetti, R., Macucci, M., Tellini, B., 2001. EMI measurements in line-pantograph contact discontinuity in railway transportation systems. In: Proceedings of the 11th International Symposium on Trends in Electrical Measurement and Instrumentation, IMEKO TC-4, Lisbon, Portugal, September, pp. 25-90.
20. Hill R.J. Optimal construction of synchronizable coding for railway track circuit data transmission. IEEE Trans. Veh. Technol. 39 4 (1990) 390-399
21. Hill R.J. Safety and reliability of synchronizable digital coding in railway track-circuits. IEEE Trans. Rel. 39 5 (1990) 581-591
22. Hill R.J. Electric railway traction. I. Electric traction and DC traction motor drives. IEE Power Eng. J. 8 1 (1994) 47-56
23. Hill R.J. Electric railway traction. II. Traction drives with three-phase induction motors. IEE Power Eng. J. 8 3 (1994) 143-152
24. Hill R.J. Electric railway traction. VI. Electromagnetic compatibility disturbance-sources and equipment susceptibility. IEE Power Eng. J. 11 1 (1997) 31-39
25. Hill R.J. Electric railway traction. VII. Electromagnetic interference in traction systems. IEE Power Eng. J. 11 6 (1997) 259-266
26. Hill R.J., and Cevik I.H. On-line simulation of voltage regulation in autotransformer-fed AC electric railroad traction networks. IEEE Trans. Veh. Technol. 42 3 (1993) 365-372
27. Holm R. Electrical Contacts (1946), Almqvist and Wiksells, Uppsala, Sweden
28. IEEE Industry Applications Society, 1981. IEEE guide for harmonic control and reactive compensation of static power converters.
29. IEEE Industry Applications Society, 1992. IEEE recommended practices and requirements for harmonic control in electrical power systems.
30. Jahns T.M., and Blasko V. Recent advances in power electronics technology for industrial and traction machine drives. Proc. IEEE 89 6 (2001) 963-975
31. Joos, G., Kapila, R., Friem, R., 1998. Electromagnetic interference issues in the specification of AC and DC propulsion systems for light rail vehicles. In: Proceedings of the 1998 ASME/IEEE Joint Railroad Conference, Philadelphia, PA, USA, April, pp. 41-47.
32. Kerkman R., Leggate D., and Skibinski G. Interaction of drive modulation and cable parameters on AC motor transients. IEEE Trans. Ind. Applicat. 33 (1997) 722-731
33. Kiessling F., Puschmann R., and Schmieder A. Contact Lines of Electric Railways: Planning, Design and Implementation (2001), Publicis Corporate Publishing, Munich Erlangen, Germany
34. Klapas D., Hackam R., and Benson F.A. Electric arc power collection FPR high-speed trains. Proc. IEEE 64 12 (1976) 1699-1715
35. Konefal, T., Pearce, D.A.J., Marshman, C.A., McCormack, L.M., 2002. Potential electromagnetic interference to radio services from railways. Final Report, March. .
36. Kroger, U., Grautstuck, H., Wirth, W., 1999. Electromagnetic or permanent-magnetic rail brake, January.
37. Leeming, D.A., Allan, J., Mellitt, B., 1992. Electromagnetic compatibility on rapid transit railways-a systems approach. In: Proceedings of the Eighth International Conference on Electromagnetic Compatibility, Edinburgh, UK, September, pp. 227-234.
38. Link P.J. Minimizing electric gearing currents in SSD systems. IEEE Ind. Appl. Mag. 5 4 (1999) 55-66
39. Lombardi, E.J., 1994. Engineering tests performed on the x2000 and ice high speed trainsets. In: Proceedings of the 1994 ASME/IEEE Joint (in Conjunction with Area 1994 Annual Technical Conference) Railroad Conference, Chicago, IL, USA, March, pp. 13-21.
40. Macdonald D., and Gray W. PWM drive related bearing failures. IEEE Ind. Appl. Mag. 5 4 (1999) 41-47
41. McCormack, L.M., Seller, S., White, R.D., Hutchison, R., Hooper, P.W., 2006. Railway electrical systems integration - practical application of the 'v' cycle for electromagnetic compatibility (EMC). In: Proceedings of the Institution of Engineering and Technology Seminar on EMC in Railways, Birmingham, UK, pp. 119-126.
42. Midya, S., Schutte, T., Thottappillil, R., 2007. Consequences of DC components in AC railway and its elimination. In: Proceedings of Railway Engineering-2007, London, UK, July.
43. Nakamura M., Tsunomachi H., and Fukui R. Road vehicle communication system for vehicle control using leaky coaxial cable. IEEE Commun. Mag. 34 10 (1996) 84-89
44. Ogasawara, S., Akagi, H., 1995. Modeling and damping of high-frequency leakage currents in PWM inverter-fed AC motor drive systems. In: Proceedings of the 13th IAS Annual Meeting Industry Applications Conference, vol. 1, Orlando, FL, USA, October, pp. 29-36.
45. Ogunsola, A., 2003. EMC assurance and management. In: Proceedings of the IEE EMC Assurance in a Railway Environment, September, pp. 1-8.
46. Ogunsola, A., Pomeroy, S., 2003. EMC assurance and safety critical apparatus in a railway environment. In: Proceedings of the IEEE International Symposium on Electromagnetic Compatibility, vol. 1, Hertfordshire, UK, May, pp. 429-432.
47. Page, C.R., 2001. ERTMS - the global signalling solution. In: Proceedings of the Rail Solutions Asia, March, pp. 01-20.
48. Pollack, M.W., 1996. Communications-based signaling: advanced capability for mainline railroads. In: Proceedings of the 1996 IEEE 46th Vehicular Technology Conference, Atlanta, GA, USA, pp. 1599-1603.
49. Pope, M.E., Harman, I., 2007. Vision and potential for future signalling strategies. UIC Signalling Panel of Experts, Ref. No: Signalling Strategy v1 0 DraftPdC, January.
50. Pozzobon, P., Amendolara, A., Vittorini, B., Henning, U., Schmid, R., Shirran, S., Ahlstedt, S., 2003. Electromagnetic compatibility of advanced rail transport signalling. In: Proceedings of the World Congress on Railway Research (WCRR), Edinburgh, UK, October, pp. 1250-1263.
51. Shobert E.I. Carbon, graphite and contacts. IEEE Trans. Parts, Hybrids, Packag. PHP-12 6 (1976) 62-74
52. Shobert, E.I., 1993. Sliding electrical contacts. In: Proceedings of the 39th IEEE Holm Conference on Electric Contacts, Pittsburgh, PA, USA, September, pp. 123-134.
53. Slade P.G. Electrical Contacts: Principles and Applications (1999), Marcel Dekker, New York, NY, USA
54. Steimel A. Electric railway traction in Europe. IEEE Ind. Appl. Mag. 2 5 (1996) 6-17
55. Steimel, A., 1996b. Electric railway traction in Europe. A survey of the state-of-the-art. In: Proceedings of the IEEE International Symposium on Industrial Electronics, ISIE, vol. 1, Warsaw, Poland, June, pp. 40-48.
56. Stemmler, H., 1993. Power electronics in electric traction applications. In: Proceedings of the 19th International Conference on Industrial Electronics, Control and Instrumentation, vol. 2, Maui, Hawaii, USA, November, pp. 707-713.
57. Tellini B., Macucci M., Giannetti R., and Antonacci G.A. Conducted and radiated interference measurements in the line-pantograph system. IEEE Trans. Instrum. Meas. 50 6 (2001) 1661-1664
58. Tellini B., Macucci M., Giannetti R., and Antonacci G.A. Line-pantograph EMI in railway systems. IEEE Instrum. Meas. Mag. 4 4 (2001) 10-13
59. Tolksdorf, G., 1974. Electromagnetic or permanent-magnetic rail brake, April.
60. UiC, 2000. FFFS for euroloop subystem. .
61. van Alphen, G.-J., 2004. Electromagnetic compatibility between rolling stock and rail-infrastructure encouraging European interoperability. Proposal to EU Specific Targeted Research Research Project RAILCOM, April.
62. von Jouanne A., and Enjeti P.N. Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applications. IEEE Trans. Ind. Applicat. 33 (1997) 1138-1145
63. White, R.D., 2006a. AC/DC railway electrification and protection. In: Proceedings of the Ninth IET Professional Development Course on Electric Traction Systems IET Seminar Digest, vol. 2006, Manchester, UK, November.
64. White, R.D., 2006b. Electrification traction and signalling compatibility. In: Proceedings of the 11th IET Professional Development Course on Railway Signalling and Control Systems, June, pp. 165-184.
65. White, R.D., 2007a. AC 25 kV 50 Hz electrification supply design. In: Proceedings of the Third IET Professional Development Course on Railway Electrification Infrastructure and Systems, Birmingham, UK, May, pp. 81-114.
66. White, R.D., 2007b. DC electrification supply system design. In: Proceedings of the Third IET Professional Development Course on Railway Electrification Infrastructure and Systems, Birmingham, UK, May, pp. 35-62.
67. Wisniewski, M., Kubichek, R., Pierre, J., 2001. EMI emissions up to 1 GHz from adjustable speed drives. In: Proceedings of the 27th Annual Conference of the IEEE Industrial Electronics Society, IECON, vol. 1, Denver, USA, December, pp. 113-118.