Ductile-brittle transitions in the fracture of plastically deforming, adhesively bonded structures. Part II: Numerical studies

International Journal of Solids and Structures

Volumn 45, Issue 17, 2008, Pages 4725-4738

  Sun, C ^a   Thouless, M D ^a   Waas, A M ^a   Schroeder, J A ^b   Zavattieri, P D ^b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

Adhesive; Brittle; Cohesive zone; Ductile; Fracture; Impact; Mode I

Indexed keywords

COMPUTER NETWORKS; CRACK PROPAGATION; CRACKING (CHEMICAL); DUCTILE FRACTURE; FRACTURE FIXATION; MECHANICS; METAL CLADDING; NUMERICAL ANALYSIS; PAPER; REAL TIME SYSTEMS; SET THEORY; TENSILE TESTING; TESTING;

(I ,J) CONDITIONS; (PL) PROPERTIES; ADHESIVELY BONDED STRUCTURES; AUTOMOTIVE APPLICATIONS; BRITTLE TRANSITIONS; COHESIVE PARAMETERS; COHESIVE PROPERTIES; CRACK GROWTH; CRACK VELOCITIES; DOUBLE-CANTILEVER BEAM (DCB); ELSEVIER (CO); EXPERIMENTAL RESULTS; EXPERIMENTAL TESTING; LOADING RATES; LOW VELOCITY IMPACT (LVI); MODE OF FRACTURE; NUMERICAL PREDICTIONS; NUMERICAL STUDIES; QUASI STATIC; STRUCTURAL ADHESIVE BONDING; TENSILE TESTS; TRANSITION (JEL CLASSIFICATIONS:E52 ,E41 ,E31); WEDGE TESTS; WIDE-RANGE;

BRITTLE FRACTURE;

EID: 45449086835     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2008.04.007     Document Type: Article

References (30)

1. Alfano G. On the influence of the shape of the interface law on the application of cohesive-zone models. Composites Science and Technology 66 (2006) 723-730
2. Andersson T., and Biehl A. On the effective constitutive properties of a thin adhesive layer loaded in peel. International Journal of Fracture 141 (2006) 227-246
3. Andersson T., and Stigh U. The stress-elongation relation for an adhesive layer loaded in peel using equilibrium of energetic forces. International Journal of Solids and Structures 41 (2004) 413-434
4. Blackman B.R.K., Kinloch A.J., Taylor A.C., and Wang Y. The impact wedge-peel performance of structural adhesives. Journal of Materials Science 35 (2000) 1867-1884
5. Cavalli M.N., and Thouless M.D. The effect of damage nucleation on the toughness of an adhesive joint. Journal of Adhesion 76 (2001) 75-92
6. Chandra N., Li H., Shet C., and Ghonem H. Some issues in the application of cohesive zone models for metal-ceramic interface. International Journal of Solids and Structures 39 (2002) 2827-2855
7. Du J., Thouless M.D., and Yee A.F. Effects of rate on crack growth in a rubber-modified epoxy. Acta Materialia 48 (2000) 3581-3592
8. Ferracin T., Landis C.M., Delannay F., and Pardoen T. On the determination of the cohesive zone properties of an adhesive layer from the analysis of the wedge-peel test. International Journal of Solids and Structures 40 (2003) 2889-2904
9. ISO 11343, 2003. Adhesives - determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - wedge impact method.
10. Kubair D.V., Geubelle P.H., and Huang Y.Y. Analysis of a rate-dependent cohesive model for dynamic crack propagation. Engineering Fracture Mechanics 70 (2005) 685-704
11. Landis C.M., Pardoen T., and Hutchinson J.W. Crack velocity dependent toughness in rate dependent materials. Mechanics of Materials 32 (2000) 663-678
12. Li H., and Chandra N. Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models. International Journal of Plasticity 19 (2003) 849-882
13. Li V.C., Chan C.M., and Leung C.K.Y. Experimental determination of the tension-softening relations for cementitious composites. Cement and Concrete Research 17 (1987) 441-452
14. Li S., Thouless M.D., Waas A.M., Schroeder J.A., and Zavattieri P.D. Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite. Composites Science and Technology 65 2 (2005) 281-293
15. Li S., Thouless M.D., Waas A.M., Schroeder J.A., and Zavattieri P.D. Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite. Composites Science and Technology 65 (2005) 537-549
16. Madhusudhana K.S., and Narasimhan R. Experimental and numerical investigations of mixed-mode crack growth resistance of a ductile adhesive joint. Engineering Fracture Mechanics 69 (2002) 865-883
17. Maugis D. Review subcritical crack growth, surface energy, fracture toughness, stick-slip and embrittlement. Journal of Materials Science 20 (1985) 3041-3073
18. Rahulkumar P., Jagota A., Bennison S.J., and Saigal S. Cohesive element modeling of viscoeleastic fracture: application to peel testing of polymers. International Journal of Solids and Structures 37 (2000) 1873-1897
19. Sørensen B.F. Cohesive law and notch sensitivity of adhesive joints. Acta Materialia 50 (2002) 1053-1061
20. Sørensen B.F., and Jacobsen T.K. Determination of cohesive laws by the J integral approach. Engineering Fracture Mechanics 70 (2003) 1841-1850
21. Su C., Wei Y.J., and Anand L. An elastic-plastic interface constitutive model: application to adhesive joints. International Journal of Plasticity 20 (2004) 2063-2081
22. Sun C., Thouless M.D., Waas A.M., Schroeder J.A., and Zavattieri P.D. Ductile-brittle transitions in the fracture of plastically-deforming, adhesively-bonded structures. Part I: Experimental studies. International Journal of Solids and Structures 45 (2008) 3059-3073
23. Thouless M.D., Kafkalidis M.S., Adams J.L., Ward S.M., Dickie R.A., and Westerbeek G.L. Determining the toughness of adhesives in plastically-deforming joints. Journal of Materials Science 33 (1998) 189-197
24. Tvergaard V., and Hutchinson J.W. Toughness of an interface along a thin ductile layer joining elastic solids. Philosophical Magazine A 70 (1994) 641-656
25. Tvergaard V., and Hutchinson J.W. On the toughness of ductile adhesive joints. Journal of the Mechanics and Physics of Solids 44 (1996) 789-800
26. Ungsuwarungsri T., and Knauss W.G. Role of damage-softened material behavior in the fracture of composites and adhesives. International Journal of Fracture 35 (1987) 221-241
27. Williams J.G. Fracture Mechanics of Polymers (1984), Ellis Horwood Limited, Chichester, UK
28. Yang Q.D., and Thouless M.D. Mixed-mode fracture analyses of plastically-deforming adhesive joints. International Journal of Fracture 110 (2001) 175-187
29. Yang Q.D., Thouless M.D., and Ward S.M. Numerical simulations of adhesively bonded beams failing with extensive plastic deformation. Journal of the Mechanics and Physics of Solids 47 (1999) 1337-1353
30. Zhou F., Molinari J.-F., and Shioya T. A rate-dependent cohesive model for simulating dynamic crack propagation in brittle materials. Engineering Fracture Mechanics 72 (2005) 1383-1410