Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 8, 2004, Pages 2371-2382

  Lee, Han Sang ^a   Hwang, Byoungchul ^a   Lee, Sunghak ^a   Lee, Chang Gil ^b   Kim, Sung Joon ^b  

^a Pohang University of Science and Technology (POSTECH)   (South Korea)

^b Korea Institute of Machine and Materials   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; DEFORMATION; DUCTILE FRACTURE; FERRITES; MARTENSITE; METALLOGRAPHIC MICROSTRUCTURE; MORPHOLOGY; SHEAR DEFORMATION; TEMPERING; TENSILE PROPERTIES;

DUAL PHASE STEELS; DYANMIC DEFROMATION; DYNAMIC TORSIONAL TESTS; INTERMEDIATE ANNEALED; STEP QUENCHED;

STEEL;

EID: 4544387527     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-006-0217-5     Document Type: Article

References (36)

1. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 41-52.
2. A.M. Memari, A.A. Aghakouchak, M. Ghafory Ashtiany, and M. Tiv: Eng. Struct., 1999, vol. 21, pp. 1115-27.
3. H.J. Ryu, S.H. Hong, D.-K. Kim, and S. Lee: Met. Mater. Int., 1998, vol. 4, pp. 367-71.
4. W. Böhme, G. Bernauer, and W. Schmitt: Nucl. Eng. Des., 1999, vol. 188, pp. 149-54.
5. S. Kim and S. Lee: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1753-60.
6. Y.S. Kim, T.M. Lee, C. Kim, and S.M. Hwang: Met. Mater. Int.,2002, vol. 8, pp. 359-65.
7. R.B. Clough, S.C. Webb, and R.W. Armstrong: Mater. Sci. Eng., 2003, vol. 360, pp. 396-407.
8. C.S. Kang, S.Y. Chang, and S.K. Hong: Met. Mater. Int., 2003, vol. 9, pp. 439-46.
9. C.K. Toh: Mater. Design, 2004, vol. 25, pp. 41-50.
10. K.C. Kim, J.T. Kim, J.I. Suk, U.H. Sung, and H.K. Kwon: Nucl. Eng. Des., 2004, vol. 228, pp. 151-59.
11. G. Thomas and J.Y. Koo: Structure and Properties of Dual Phase Steels, AIME, New York, NY, 1979.
12. N.J. Kim and G. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 483-89.
13. N.J. Kim and A.H. Nakagawa: Mater. Sci. Eng. A, 1986, vol. 83A, pp. 145-49.
14. D. Suh, D. Kwon, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 504-08.
15. K.J. Kim, C.G. Lee, and S. Lee: Scripta Mater., 1998, vol. 38,pp. 27-32.
16. H. Kolsky: Proc. Phys. Soc., 1949, vol. 62B, pp. 676-700.
17. K.A. Hatley, J. Duffy, and R.H. Hawley: Metals Handbook, 9th ed., ASM, Metals Park, OH, 1985, vol. 8, pp. 218-28.
18. A. Gilat: in ASM Handbook, ASM INTERNATIONAL, Metals Park, OH, 2000, vol. 8, pp. 505-16.
19. D.-K. Kim, S. Lee, and H.-S. Song: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1261-73.
20. S.S.M. Tavares, P.D. Pedroza, J.R. Teodosio, and T. Gurova: Scripta Mater., 1999, vol. 40, pp. 887-92.
21. R. Datta, V. Raghavan, V. Ramaswamy, and S. Mishra: J. Mater. Sci. Lett., 1989, vol. 8, pp. 1480-82.
22. A.K. Panda, D.S. Sarma, R.I. Ganguly, and S. Misra: Steel Res., 1993, vol. 64, pp. 513-16.
23. B.K. Jha, R. Avtar, V.S. Dwivedi, and N.S. Mishra: Steel Res., 1993, vol. 64, pp. 171-77.
24. A. Joarder, J.N. Jha, S.N. Ojga, and D.S. Sarma: Mater. Characterization, 1990, vol. 25, pp. 199-209.
25. Metals Handbook, 10th ed., ASM, Metals Park, OH, 1990, vol. 1,pp. 240-47.
26. I.A. El-Sesy and Z.M. El-Baradie: Mater. Lett., 2002, vol. 57, pp. 580-85.
27. W.D. Callister: Material Science and Engineering - an Introduction, 4th ed., John Wiley & Sons, Inc., New York, NY, 1997, pp. 517-25.
28. S. Sun and M. Pugh: Mater. Sci. Eng., 2001, vol. A318, pp. 320-27.
29. D. Suh, D. Kwon, S. Lee, and N.J. Kim: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 504-08.
30. S. Lee, K. Cho, C.S. Lee, and W.Y. Choo: Metall. Trans. A, 1993, vol. 24A, pp. 2217-24.
31. K. Cho, S. Lee, J. Duffy, and S.R. Nutt: Acta Metall., 1993, vol. 41, pp. 923-32.
32. J.W. Huchinson: Scripta Metall., 1984, vol. 18, pp. 421-58.
33. H.C. Rogers: Ann. Rev. Mater. Sci., 1979, vol. 9, pp. 283-311.
34. K. Cho, Y.C. Chi, and J. Duffy: Metall. Trans. A, 1990, vol. 21A, pp. 1161-75.
35. C.G. Lee, Y.J. Lee, and S. Lee: Scripta Metall., 1995, vol. 32, pp. 821-26.
36. D.-G. Lee, S. Kim, S. Lee, and C.S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 315-24.