An alternative method for the treatment of waste produced at a dye and a metal-plating industry using natural and/or waste materials

Waste Management and Research

Volumn 22, Issue 4, 2004, Pages 234-239

  Fatta, Despo ^a   Papadopoulos, Achilleas ^b   Stefanakis, Nikos ^b   Loizidou, Maria ^b   Savvides, Chrysanthos ^c  

^a UNIVERSITY OF CYPRUS   (Cyprus)

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

^c Ministry of Labour and Social Insurance   (Cyprus)

Author keywords

Cement and lime based stabilization solidification; Heavy metals; Treatment of industrial waste; Wmr 724 3

Indexed keywords

CEMENTS; COMPRESSION TESTING; COMPRESSIVE STRENGTH; DYES; GROUNDWATER POLLUTION; HAZARDOUS MATERIALS; INDUSTRIAL WASTE DISPOSAL; LIME; PLATING; SOLIDIFICATION; STABILIZATION; WATER QUALITY;

DYE INDUSTRY; METAL PLATING INDUSTRY;

INDUSTRIAL WASTE TREATMENT;

BENTONITE; CALCIUM OXIDE; CALCIUM SULFATE; CEMENT; DYE; GROUND WATER; METAL;

DYE; HAZARDOUS WASTE; INDUSTRIAL WASTE; METALS INDUSTRY; WASTE TREATMENT;

ARTICLE; COMPRESSIVE STRENGTH; CONTROLLED STUDY; HAZARDOUS WASTE; INDUSTRIAL WASTE; LEACHING; PRIORITY JOURNAL; TECHNOLOGY; WASTE DISPOSAL; WASTE MANAGEMENT; WATER QUALITY;

COLORING AGENTS; CONSTRUCTION MATERIALS; COST-BENEFIT ANALYSIS; ELECTROPLATING; HAZARDOUS WASTE; INDUSTRIAL WASTE; WASTE DISPOSAL, FLUID; WATER POLLUTION;

EID: 4544360764     PISSN: 0734242X     EISSN: None     Source Type: Journal    
DOI: 10.1177/0734242X04045428     Document Type: Article

References (14)

1. Adams, V.D. (1990): Water and Wastewater Examination Manual. Lewis Publisher, Michigan.
2. Breslin, V.T. & Tisdell, S.E. (1994): Thermoplastic stabilization of MSW combustor ash. Journal of Environmental Engineering 120 154-168.
3. Conner, J.R. (1990): Chemical Fixation and Solidification of Hazardous Wastes. Van Nostrand Reinhold Publications, New York.
4. Day, R.L. & Shi, C. (1994): Influence of the fineness of pozzolan on the strength of lime natural-pozzolan cement pastes. Cement and Concrete Research 24, 1485-1491.
5. Hills, C.B., The hydration of the Portland Cement during Cement-based Solidification of toxic wastes, University of London, Ph. D. Thesis, 1993.
6. Roy, A., Eaton, H.C., Cartledge, F.K & Tittlebaum, M.E. (1991): Solidification/stabilization of a heavy metal sludge by a Portland cement / fly ash binding mixture. Hazardous Waste and Hazardous Materials 8, 33-41.
7. Roy, A. & Eaton, H.C., (1992): Solidification/stabilization of a synthetic electroplating waste in lime-fly ash binder. Cement and Concrete Research 22, 589-596.
8. Savvides, C., Haralambous, K.J., Loizidou, M. & Cheeseman, C. (1997): Stabilization/ solidification of hazardous industrial waste prior to land-filling. Proceedings of the 6th International Landfill Symposium, Sardinia 97, pp. 503-509.
9. Savvides, C., Papadopoulos, A., Haralambous, K.J. & Loizidou, M. (2001): Cement-based stabilization/solidification of metal plating industry sludge. Journal of Environmental Science and Health, A36, 1129-1134.
10. Tittlebaum, M.E, Cartledge, F.K., Chalasani, D., Eaton, H. & Walsh, M. (1985): A procedure for characterizing interactions of organic with cement: effect of organics on solidification/stabilization. Proceedings of International Conference on New Frontiers for Hazardous Waste Management, EPA/600/9-87/018. US EPA, Washington, DC.
11. US EPA (1986): Handbook for Stabilization/Solidification of Hazardous Wastes, EPA/540/2-86-001. US Environmental Protection Agency, Risk Reduction Engineering Laboratory, Cincinnati, OH.
12. US EPA (1989): Stabilization/Solidification of CERCLA and RCRA Wastes: Physical Tests, Chemical Testing Procedures, Technology Screening and Field Activities, 1st edn, EPA/625/6-89/022. US Environmental Protection Agency, Office of Research and Development, Washington, DC.
13. US EPA (1993): Stabilization/Solidification and its Application to Waste Materials, EPA/530/R-93/0-12. US Environmental Protection Agency, Office of Research and Development, Washington, DC.
14. Vipulanandan, C. & Krishnan, S. (1990): Solidification/stabilization of phenolic waste with cementious and polymeric materials. Journal of Hazardous Materials 24, 123-136.