Processing, microstructure and mechanical properties of directionally solidified TiAl based alloy reinforced by Al2O3 particles

Gamma Titanium Aluminides 2003

Volumn , Issue , 2003, Pages 185-198

  Lapin, Juraj ^a   Nazmy, Mohamed ^b  

^a INSTITUTE OF MATERIALS AND MACHINE MECHANICS   (Slovakia)

^b ALSTOM SWITZERLAND LTD   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM ALLOYS; CRYSTALLOGRAPHY; ENERGY DISPERSIVE SPECTROSCOPY; MICROSTRUCTURE; NITRIC ACID; OPTICAL MICROSCOPY; POLYCRYSTALLINE MATERIALS; SCANNING ELECTRON MICROSCOPY; THERMAL EFFECTS; TITANIUM ALLOYS; TRANSMISSION ELECTRON MICROSCOPY; TURBINES;

HIGH PRESSURE COMPRESSOR BLADES; INTERLAMELLAR SPACINGS; METALLOGRPAHIC TECHNIQUES; PREHEATED CERAMIC MOULDS;

ALUMINA;

EID: 4544350988     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Conference Paper

References (63)

1. C.M. Austin, "Current Status of Gamma Ti Aluminides for Aerospace Applications," Current Opinion in Solid State and Materials Science, 4 (1999), 239-242.
2. P.A. Bartolotta and D.L. Krause, "Titanium Aluminide Applications in the High Speed Civil Transport," Gamma Titanium Aluminides 1999, ed. Y.W. Kim, D.D. Dimiduk, and M.H. Loretto, (TMS, Warrendale, PA, 1999), 3-10.
3. E.A. Loria, "Gamma Titanium Aluminides as Prospective Structural Materials," Intermetallics, 8 (2000), 1339-1345.
4. M. Nazmy and V. Lupinc, "Gamma TiAl Intermetallics for Turbomachinery Applications." Materials for Advanced Power Engineering 2002, ed. J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, (Forschungszentum Jülich GmbH, Vol. 21, Part 1, 2002), 43-56.
5. T. Tetsui, "Gamma Ti Aluminides for Non-Aerospace Applications," Current Opinion in Solid State and Materials Science, 4 (1999), 243-248.
6. M. Blum et al., "Properties of Low Cost TiAl Automotive Valves Produced by Cold Wall Induction Melting and Permanent Mold Centrifugal Casting," Gamma Titanium Aluminides 1999, ed. Y.W. Kim, D.D. Dimiduk, and M.H. Loretto, (TMS, Warrendale, PA, 1999), 35-39.
7. T. Tetsui, "Development of a TiAl Turbocharger for Passenger Vehicles," Materials Science and Engineering, A329-331(2002), 582-588.
8. F. Appel and R. Wagner, "Microstructure and Deformation of Two-Phase γ-Titanium Aluminides," Materials Science and Engineering, R22 (1998), 187-268.
9. I.S. Jung et al., "Microstincture Control of TiAl Alloys Containing β Stabilizers by Directional Solidification," Materials Science and Engineering, A329-331 (2002), 13-18.
10. M. Yamaguchi et al., "Directional Solidification of TiAl-Base Alloys," Intermetallics, 8 (2000), 511-517.
11. H.N. Lee et al., "Directional Solidification and Creep Deformation of a Ti-46Al-1.5Mo-0.2C (at.%) Alloy," Intermetallics, 10 (2002), 841-850.
12. 2 Lamellar Microstructures," Intermetallics, 7 (1999), 779-784.
13. D.R. Johnson et al., "Microstructural Control of TiAl-Mo-B Alloys by Directional Solidification," Acta Materialia, 46 (1998), 6529-6540.
14. S.E. Kim et al., "Directional Solidification of TiAl Base Alloys Using a Polycrystalline Seed," Materials Science and Engineering, A329-331 (2002), 25-30.
15. 3Al Lamellar Microstructure in TiAl Alloys by Directional Solidification," Materials Science and Engineering, A239-240 (1997), 577-583.
16. H.N. Lee et al., "Microstructural Control Through Seeding and Directional Solidification of TiAl Alloys Containing Mo and C," Acta Materialia, 48 (2000), 3221-3233.
17. H. Inui et al., "High-Resolution Electron Microscopy Study of Lamellar Boundaries in Ti-Rich TiAl Polysynthetically Twinned Crystals," Ultramicroscopy, 39 (1-4) (1991), 268-278.
18. J. Lapin and L'. Ondrúš, "Formation of Ceramic Particles in Intermetallic Ti-46Al-2W-0.5Si Alloy During Directional Solidification," Kovove Materialy-Metallic Materials, 40 (2002), 161-170.
19. J. Lapin, E. Ondrúš, and M. Nazmy, "Directional Solidification of Intermetallic Ti-46Al-2W-0.5Si Alloy in Alumina Moulds," Intermetallics, 10(2002), 1019-1031.
20. J.P. Kuang, R.A. Harding, and J. Campbell, "Investigation into Refractories as Crucible and Mould Materials for Melting and Casting γ-TiAl," Materials Science and Technology, 16 (2000), 1007-1016.
21. J.P. Kuang, R.A. Harding, and J. Campbell, "A Study of Refractories as Crucible and Mould Materials for Melting and Casting γ-TiAl Alloys," International Journal of Cast Metals Research, 13 (2001), 277-292.
22. D.D. Dimiduk, et al., "The role of the Grain Size and Selected Microstructural Parameters in Strengthening Fully Lamellar TiAl Alloys," Metallurgical and Materials Transactions, 29A (1998), 37-47.
23. K. Kishida et al., "Deformation and Fracture of PST Crystals and Directionally Solidified Ingots of TiAl-Based Alloys," Intermetallics, 6 (1998), 679-683.
24. P.J. Maziasz and C.T. Liu, "Development of Utrafme Lamellar Structures in Two-Phase γ-TiAl Alloys," Metallurgical and Materials Transactions, 29A (1998), 105-117.
25. Y.W. Kim, "Effect of Microstructure on the Deformation and Fracture of γ-TiAl Alloys", Materials Science and Engineering, A192/193 (1995), 519-533.
26. Y.W. Kim, "Strength and Ductility in TiAl Alloys," Intermetallics, 6 (1998), 623-628.
27. C. Choi et al., "Effects of Microstructural parameters on the Fatigue Crack Growth of Fully Lamellar γ-TiAl Alloys," Materials Science and Engineering, A329-331 (2002), 545-556.
28. C.T. Liu and P.J. Maziasz, "Microstructural Control and Mechanical Properties of Dual-Phase TiAl Alloys," Intermetallics, 6 (1998), 653-661.
29. F. Perdrix et al., "Influence of Cooling Rate on Microstructure and Mechanical Properties of a T1-48Al Alloy," Intermetallics, 7 (1999), 1323-1328.
30. M. Yamaguchi et al., "Recent Progress in Our Understanding of Deformation and Fracture of Two-Phase and Single-Phase TiAl Alloys," Materials Science and Engineering, A213 (1996), 25-31.
31. Y. Umakoshi and T. Nakano, "The Role Ordered Domains and Slip Mode of 0.2 Phase in the Plastic Behaviour of TiAl Crystals Containing Oriented Lamellae," Acta Metallurgisa Materialia, 41 (1993), 1155-1161.
32. J. Lapin, "Effect of Lamellar Structure on Microhardness and Yield Stress of Directionally Solidified Intermetallic T1-46Al-2W-O.SSi Alloy," Journal of Materials Science Letters, 2003, in press.
33. 2," Scripta Materialia, 34 (1996), 1251-1256.
34. R. Martin et al. "Microstructure/Processing Relationships in Reaction-Synthesized Titanium Alummide Intermetallic Matrix Composites," Metallurgical and Materials Transactions, 33A (2002), 2747-2753.
35. S.L. Kampe et al., "The Effect of Matrix Microstructure and Reinforcement Shape on the Creep Deformation of Near-γ Titanium Aluminide Composites," Acta Materialia, 46 (1998), 2881-2894.
36. K.P. Rao and Y.J. Du, "In Situ Formation of Titanium Silicides-Reinforced TiAl-Based Composites," Materials Science and Engineering, A277 (2000), 46-56.
37. T. Hanamura and K. Hashimoto, "Oxide Dispersion in Direct-Cast Gamma TiAl-Based Alloy," High-Temperature Ordered Intermetallic Alloys VI, ed. J.A. Horton, I. Baker, S. Hanada, R.D. Noebe, and D.S. Schwartz, (Pittsburgh, Pennsylvania: Materials Research Society, 1995), 775-780.
38. M. Nazmy and M. Staubli, U.S.Pat.#5,207,982 and European Pat.#45505 BI.
39. J. Lapin and A. Klimová, "Effect of Heat Treatments on the Microstructure and Mechanical Properties of a Cast Intermetallic Ti-46Al-2W-0.5Si Alloy," Kovove Materialy-Metallic Materials, 41 (2003), 1-17.
40. J. Philibert, Atom Movements - Diffusion and Mass Transport in Solids (Les Ulis, Les Editions de Physique 1991), 425-453.
41. D. Janičkovič et al., "The Rapidly Quenched of Ag-Cu-Ti Ribbons for Active Joining of Ceramics," Materials Science and Engineering, A304-306 (2001), 569-573.
42. 3-Ti Aluminide Interpenetrating Phase Composites," Journal of the European Ceramic Society, 22 (2002), 947-954.
43. J. Lapin and T. Pelachová, "Microstructure and Creep of a Cast γ-TiAl Intermetallic Alloy," Materials for Advanced Power Engineering 2002, ed. J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, (Forschungszentum Jülich GmbH, Vol. 21, Part II, 2002), 623-632.
44. W.M. Yin, V. Lupinc, and L. Battezzati, "Microstructure Study of a γ-TiAl Based Alloy Containing W and Si," Materials Science and Engineering, A239-240 (1997), 713-721.
45. 3 Precipitates and γ-TiAl Intermetallics," Acta Materialia, 48 (2000), 3701-3710.
46. I. Gil, M.A. Muñoz-Morris, and D.G. Morris, "The Effect of Heat Treatments on the Microstructural Stability of the Intermetallic Ti-46.5Al-2W-0.5Si," Intermetallics, 9 (2001), 373-385.
47. M.A. Muñoz-Morris, I.G. Femández, and D.G. Morris, "Softening Produced by the Microstructural Instability of the Intermetallic Alloy Ti-46.5Al-2W-0.5Si," Scripta Materialia, 46 (2002), 617-622.
48. R. Trivedi and W. Kurz, "Modeling of Solidification Microstructures in Concentrated Solutions and Intermetallic Systems," Metallurgical Transactions, 21A (1990), 1311-1318.
49. W. Kurz, B. Giovanola, and R. Trivedi, "Theory of Microstructural Development During Rapid Solidification," Acta Metallurgica 34 (1986), 823-830.
50. J. Lapin, et al., "Directional Solidification of Ni-Al-Cr-Fe Alloy," Scripta Materialia, 37 (1997), 85-91.
51. 53 Alloy," Journal of Crystal Growth, 240 (2002), 603-610.
52. J.D. Hunt, "Cellular and Primary Dendrite Arm Spacings", Solidification and Casting of Metals (The Metals Society, Book 192, London, 1979), 3-9.
53. W. Kurz and D.J. Fisher, "Dendrite Growth at the Limit of Stability: Tip Radius and Spacing," Acta Metallurgica, 29 (1981), 11-20.
54. R. Trivedi, "Interdendritic Spacing: Part II. A Comparison of Theory and Experiment," Metallurgical Transactions, 15A (1984), 977-982.
55. B. Dutta and M.K. Surappa, "Directional Dendritic Solidification of a Composite Slurry," Metallurgical and Materials Transactions, 29A (1998), 1329-1339.
56. M. Maruyama, N. Yamada, and H. Sato, "Effects of Lamellar Spacing on Mechanical Properties of Fully Lamellar Ti-39.4 mo.% Al Alloy," Materials Science and Engineering, A319-321 (2001), 360-363.
57. 2 Phases of TiAl-Based Alloys," Acta Materialia, 44 (1996), 4729-4737.
58. T. Kawabata, T. Abumiya, and O. Izumi, "Effect of Oxygen Addition on Mechanical Properties of TiAl at 293-1273 K," Acta Metallurgica et Materialia, 40 (1992), 2557-2567.
59. B.K. Kad and H.L. Fraser, "On the Contribution of Climb to High-Temperature Deformation in Single-Phase Gamma-TiAl," Philosophical Magazine A - Physics of Condensed Matter Structure Defects and Mechanical Properties, 69 (1994) 689-699.
60. M.A. Morris, "Dislocation Mobility, Ductility and Anomalous Strengthening of Two-Phase TiAl Alloys: Effects of Oxygen and Composition," Intermetallics, 4 (1996), 417-426.
61. B. Reppich, "Particle Strengthening," Materials Science and Technology - Plastic Deformation and Fracture of Materials, ed. R.W. Cahn, P. Haasen, and E.J. Kramer (VCH Verlagsgesellschaft GmbH, Weinheim, Vol. 6,1993), 311-357.
62. 3 Particles on Mechanical Properties of Directionally Solidified Intermetallic Ti-46Al-2W-0.5Si Alloy," Materials Science and Engineering A, submitted for publication.
63. R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials (Third Edition, John Wiley & Sons, Inc., New York, 1989) 36-52.