State of the art on pulsating heat pipes

Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004)

Volumn , Issue , 2004, Pages 33-44

  Groll, Manfred ^a   Khandekar, Sameer ^a  

^a UNIVERSITY OF STUTTGART   (Germany)

Author keywords

Electronics thermal management; Pulsating heat pipes; Two phase oscillating flow

Indexed keywords

CHANNEL FLOW; EVAPORATORS; FRICTION; GRAVITATION; HEAT TRANSFER; MICROELECTRONICS; SURFACE TENSION; THERMAL CONDUCTIVITY; VAPORS; VISCOSITY;

ELECTRONIC THERMAL MANAGEMENT; PRESSURE DIFFERENCES; PULSATING HEAT PIPES (PHP); SATURATION STATES;

HEAT PIPES;

EID: 4544348950     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/icmm2004-2318     Document Type: Conference Paper

References (42)

1. Siegel R. and Perlmutter M., Heat Transfer for Pulsating Laminar Duct Flow, ASME J. Heat Transfer, Vol. 84, pp. 111-123, 1962.
2. Kurzweg U. and Zhao L., Heat Transfer by High Frequency Oscillations: A New Hydrodynamic Technique for Achieving Large Effective Thermal Conductivities. Physics of Fluids, Vol. 27, pp. 2624-2627, 1984.
3. Zhao T. and Cheng P., A Numerical Solution of Laminar Forced Convection in a Pipe Subjected to a Reciprocating Flow, Int. J. Heat Mass Trans., Vol. 38, 3011-3022, 1995.
4. Sert C. and Beskok A., Numerical Simulation of Reciprocating Flow Forced Convection in Two-Dimensional Channels, ASME J. Heat Trans., Vol. 125, pp. 403-412, 2003.
5. Miller, J. S., Physics of the Dunking Duck, Am. J. Phys. Vol. 26, 1958.
6. Smyrnov G. and Savchenkov G., USSR Patent, Patent Number 504065, 1975.
7. Akachi H., U. S. patent, Patent Number 5219020, 1993.
8. Harmathy T. Z., Velocity of Large Bubbles in Media of Infinite or Restricted Extent, A.I.Ch.E. Journal, Vol. 6, No. 2, pp. 281-288, 1960.
9. White E. and Beardmore R., The Velocity of Rise of Single Cylindrical Air Bubbles Through Liquids Contained in Vertical Tubes, Chem. Engg. Science, Vol. 17, pp. 351-361, 1962.
10. Akachi H., U. S. patent, Patent Number 5490558, 1996.
11. Maezawa S., Gi A., Minamisawa K. and Akachi H., Thermal Performance of Capillary Tube Thermosyphon, Proc. 9th Int. Heat Pipe Conf., Vol. 2, pp. 791-795, Albuquerque, 1995.
12. Kawara Z., Takahashi O., Serizawa A. and Kohno M., Visualization of Flow in Heat Pipe by Proton Radiography, Proc. 24th Visualization and Information Symp., Osaka, pp. 27-23, 1996.
13. Akachi H., Polášek F. and Stulc P., Pulsating Heat Pipes. Proc. 5th Int. Heat Pipe Symp., Melbourne, pp. 208-217, 1996.
14. Akachi H. and Polášek F., Thermal Control of IGBT Modules in Traction Drives by Pulsating Heat Pipes, Preprints 10th Int. Heat Pipe Conf., Vol. 3, pp. 8-12, Stuttgart, 1997.
15. Maezawa S., Nakajiina R., Gi K. and Akachi H., Experimental Chaos in Oscillating Capillary Tube Heat Pipes, Preprints 10th Int. Heat Pipe Conf., Stuttgart, Vol. 3/4, Session F, 1997.
16. Hosoda M., Nishio S. and Shirakashi R., Study of Meandering Closed-Loop Heat-Transport Device (Vapor-plug Propagation Phenomena), JSME Int. Journal, Series B, Vol. 42, No. 4, pp. 737-743, 1999.
17. Tong B. Y., Wong T. N. and Ooi K., Closed-Loop Pulsating Heat Pipe, Applied Thermal Engineering, SSN 1359-4311, Vol. 21/18, pp. 1845-1862, 2001.
18. Qu W. and Ma T., Experimental Investigation on Flow and Heat Transfer of a Pulsating Heat Pipe, Proc. 12. Int. Heat Pipe Conf., pp. 226-231, Moscow, 2002.
19. Charoensawan P., Khandekar S., Groll M. and Terdtoon P., Closed Loop Pulsating Heat Pipes - Part A: Parametric Experimental Investigations, Applied Thermal Engineering, Vol. 23/16, pp. 2009-2020, 2003.
20. Duminy S., Experimental Investigation of Pulsating Heat Pipes, Diploma thesis, Institut fur Kernenergetik und Energiesysteme, IKE-5D-313. Universität Stuttgart, 1998.
21. Khandekar S., Groll M., Charoensawan P. and Terdtoon P., Pulsating Heat Pipes: Thenno-fluidic Characteristics and Comparative Study with Single Phase Thermosyphon, Proc. 12th Int. Heat Trans. Conf., Vol. 4, pp. 459-464, Grenoble, 2002.
22. Khandekar S., Dollinger N. and Groll M., Understanding Operational Regimes of Pulsating Heat Pipes: An Experimental Study, Applied Thermal Engineering, Vol. 23/6, pp. 707-719, 2003.
23. Khandekar S. and Groll M., An Insight into Thermo-Hydraulic Coupling in Pulsating Heat Pipes, Int. J. of Thermal Sciences (Rev. Gén. Therm.), (in press), 2004.
24. Khandekar S., Thermo-hydrodynamics of Closed Loop Pulsating Heat Pipes, Doctoral dissertation, Universität Stuttgart, 2004.
25. Zuo Z. J. and North M. T., Miniature High Heat Flux Heat Pipes for Cooling Electronics, Proc. of SEE 2000, Hong Kong, pp. 573-579, 2000. Available at www.thermacore.com.
26. Wong T. N., Tong B. Y., Lim S. M. and Ooi K. T., Theoretical Modeling of Pulsating Heat Pipe, Proc. 11th Int. Heat Pipe Conf., Tokyo, pp. 159-163, 1999.
27. Swanepoel G., Taylor A. and Dobson R., Theoretical Modeling of Pulsating Heat Pipes, Proc. Int. Heat Pipe Symp. (CD-version), Chiang Mai, pp. 227-234, 2000.
28. Shafii M. B., Faghri A. and Zhang Y., Thermal Modeling of Unlooped and Looped Pulsating Heat Pipes, ASME J. Heat Tran., Vol. 123, pp. 1159-1172, 2001.
29. Zhang Y. and Faghri A., Heat Transfer in a Pulsating Heat Pipe with Open End, Int. J. Heat Mass Transfer, Vol. 45, pp. 755-764, 2002.
30. Maezawa S. Nakajima S., Gi K. and Akachi H., Experimental Study on Chaotic Behavior of Thermo-hydraulic Oscillation in Oscillating Thermo-syphon, Proc. 5th Int. Heat Pipe Symp., Melboum, pp. 131-137, 1996.
31. Maezawa S., Sato F. and Gi K., Chaotic Dynamics of Looped Oscillating Heat Pipes, Proc. 6th Int. Heat Pipe Symp., Chiang Mai, pp. 273-280, 2000.
32. Khandekar S., Charoensawan P., Groll M. and Terdtoon P., Closed Loop Pulsating Heat Pipes - Part B: Visualization and Semi-Empirical Modeling, Applied Thermal Engineering, Vol. 23/16, pp. 2021-2033, 2003.
33. Khandekar S., Cui X. and Groll M., Thermal Performance Modeling of Pulsating Heat Pipes by Artificial Neural Network, Proc. 12th Int. Heat Pipe Conf., pp. 215-219, Moscow, 2002.
34. Suo M. and Griffith P., Two-Phase Flow in Capillary Tubes, Trans. ASME, J. Basic Engg., pp. 576-582, 1964.
35. Lee W., Jung H., Kim J. and Kim J., Flow Visualization of Oscillating Capillary Tube Heat Pipe, Proc. 11th IHPC, Tokyo, pp. 355-360, 1999.
36. Nishio S., Nagata S., Baba S. and Shirakashi R., Thermal Performance of SEMOS Heat Pipes, Proc. 12th Int. Heat Trans. Conf., Grenoble, Vol. 4, pp. 477-482, 2002.
37. Groll M. and Khandekar S., Pulsating Heat Pipes: A Challenge and Still Unsolved Problem in Heat Pipe Science, Archives of Thermodynamics, ISSN 1231-0956, Vol. 23/4, pp. 17-28, 2002.
38. Groll M. and Khandekar S., Pulsating Heat Pipes: Progress and Prospects, Proc. 3rd Int. Conf. on Energy and Environment, ISBN 7-5323-7335-5/TK-22, Vol. 1, pp. 723-730, Shanghai, China, 2003.
39. Derbali Y., On Some Thermo-hydrodynamic Aspects of Closed Loop Pulsating Heat Pipes, Student thesis-Institut für Kemenergetik und Energiesysteme, IKE-D-345, Universität Stuttgart, 2003.
40. Boure J., Bergles A. and Tong L., Review of Two-phase Flow Instability, Nuclear Engg. Design, Vol. 25, pp. 165-192, 1973 (also ASME paper No 71-HAT-42).
41. Yadigaroglu G. and Bergles A., Fundamental and Higher-Mode Density-Wave Oscillations in Two-Phase Flow, ASME J. Heat Trans., pp. 189-195, 1972.
42. Ishii M. and Zuber N., Thermally Induced Flow Instabilities in Two-Phase Mixtures, Paper No. B5.11, Proc. 4th Int. Heat. Trans. Conf., Paris, 1970.