Mechanical behavior of Gamma-Met PX under uniaxial loading at elevated temperatures and high strain rates

International Journal of Solids and Structures

Volumn 41, Issue 22-23, 2004, Pages 6485-6503

  Shazly, Mostafa ^a   Prakash, Vikas ^a   Draper, Susan ^b  

^a Case Western Reserve University   (United States)

^b NASA GLENN RESEARCH CENTER   (United States)

Author keywords

Dynamic compression tests; Dynamic tensile tests; Elevated temperature; Gamma Met PX

Indexed keywords

CORROSION RESISTANCE; DUCTILITY; ELASTICITY; FRACTURE TOUGHNESS; GAMMA RAYS; HIGH TEMPERATURE OPERATIONS; MECHANICAL ALLOYING; OXIDATION; PLASTICITY; STRAIN; STRESS ANALYSIS; SUPERALLOYS; THERMOANALYSIS; TITANIUM ALLOYS;

DYNAMIC COMPRESSION TESTS; DYNAMIC TENSILE TESTS; ELEVATED TEMPERATURE; GAMMA-MET PX;

TITANIUM COMPOUNDS;

EID: 4544259816     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2004.05.014     Document Type: Article

References (42)

1. ABAQUS™, 2001. Hibbit, Karlsson and Sorensen, Providence, RI.
2. Al-Mousawi M.M., Reid S.R., Deans W.F. Use of the split Hopkinson pressure bar techniques in high strain rate materials testing. Journal of Mechanical Engineering Science. 211(4):1997;273-292.
3. Austin C.M., Kelly T.J., McAllister K.G.C.J.C. Aircraft Engine applications for gamma titanium aluminides. Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., Yamaguchi M. Proceedings of the Second International Symposium on Structural Intermetallics. 1997;413-425 TMS, Warrendale, PA.
4. Bartels A., Clemens H., Dehm G., Lach E., Schillinger W. Strain rate dependence of the deformation mechanisms in a fully lamellar γ-TiAl based alloy. Materials Research and Advanced Techniques. 93(3):2002;180-185.
5. Bartels A., Koeppe C., Zhang T., Mecking H. Yield and work hardening of the TiAl in the regime of inverse strain rate and temperature dependence. Kim Y.-W., et al. Gamma Titanium Aluminides. 1995;655-663 The Minerals, Metals and Materials Society.
6. Das G., Clemens H. Deformation and microstructure of Ti-47Al-2Cr-0.2Si rolled sheets. Kim Y.-W., et al. Gamma Titanium Aluminides. 1999;281-289 The Minerals Metals and Materials Society.
7. Dimiduk D.M., Miracle D.B., Kim Y.-W., Mendiratta M.G. Recent progress in intermetallic alloys for advanced aerospace applications. ISIJ International. 31(10):1991;1223-1234.
8. 3Al and TiAl. Materials Chemistry and Physics. 72:2001;301-319.
9. Follansbee P.S. The Hopkinson bar. Metals Handbook, ninth ed. Mechanical Testing. vol. 8:1985;198-217 American Society of Materials, Metals Park, OH.
10. Follansbee P.S., Frantz C. Wave propagation in the split Hopkinson Pressure bar. Journal of Engineering Materials and Technology. 105:1983;61-66.
11. Gardiner P., Miguelez H., Cortes R., LePetitcorps Y., Dodd B., Navarro C. Dynamic characterization of TiAl intermetallics in hot compression. Journal De Physique IV C3. 7:1997;593-597.
12. Gray G.T. High strain rate testing of materials: the split Hopkinson pressure bar. Methods in Materials Research. 2000;John Wiley Press.
13. Harding J., Wood E.D., Cambell J.D. Tensile testing of materials at impact rates of strain. Journal of Mechanical Engineering Science. 2:1960;88-96.
14. Huang S.-C., Hall E.L. Plastic deformation and fracture of binary TiAl base alloys. Metallurgical Transactions A. 22A:1991;427-439.
15. Jin Z., Cady C., Gray G., Kim Y.-W. Mechanical response and microcrack formation in a fine-grained Duplex TiAl at different strain rates and temperature. Kim Y.-W., et al. Gamma Titanium Aluminides. 1995;101-110 The Minerals Metals and Materials Society.
16. Jin Z., Gray G.T. III, Kim Y.-W., Yamaguchi M. Mechanical behavior and microcrack formation in γ-TiAl as a function of strain rate and temperature. Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., Yamaguchi M. Proceedings of the Second International Symposium on Structural Intermetallics. 1997;225-233 TMS, Warrendale, PA.
17. Kim Y.-W. Intermetallic alloys based on gamma titanium aluminides. Journal of Metals. 41(7):1989;24-30.
18. Kim Y.-W., Dimiduk D.M. Progress in the understanding of gamma titanium aluminide. JOM. 43(8):1991;40-47.
19. Kumpfert J., Kim Y.-W., Dimiduk D.M. Effect of microstructure on fatigue and tensile properties of the gamma TiAl alloy Ti-46.5Al-3.0Nb-2.1Cr-0.2W. Materials Science and Engineering A. 192/193:1995;465-473.
20. LeHolm R., Clemens H., Kestler H. Powder metallurgy (PM) gamma based titanium aluminide structures for use in various high temperature aerospace applications. Kim Y.-W., et al. Gamma Titanium Aluminides. 1999;25-33 The Minerals Metals and Materials Society.
21. Lennon A.M., Ramesh K.T. A technique for measuring the dynamic behavior of materials at high temperatures. International Journal of Plasticity. 14:1998;1279-1292.
22. Lindholm U.S., Yeakley L.M. High strain-rate testing: tension and compression. Experimental Mechanics. 8:1968;1-9.
23. Liu C.T., Maziasz P.J., Clemens D.R., Schneibel J.H., Sikka V.K., Nieh T.G., Wright J., Walker L.R. Room and elevated temperature mechanical properties of PM TiAl alloy Ti-47Al-2Cr-2Nb. Kim Y.-W., et al. Gamma Titanium Aluminides. 1995;679-688 The Minerals Metals and Materials Society.
24. Lui C.T., Stiegler J.O. Ordered Intermetallics. Metals Handbook, 10th ed. vol. 2:2002;913-942 American Society of Materials.
25. Maloy S.A., Gray G.T. III High strain rate deformation of Ti-48Al-2Nb-2Cr. Acta Materialia. 44(5):1996;1741-1756.
26. Millett J.C.F., Gray G.T., Bourne N.K. Lateral stress measurements and shear strength in shock loaded γ-TiAl alloy. Journal De Physique IV. 10:2000;781-785.
27. Morris M.A. Dislocation configurations in two phase TiAl alloys III. Mechanisms producing anomalous flow stress dependence on temperature. Philosophical Magazine A. 69(1):1994;129-150.
28. Nemat-Nasser S., Issacs J.B., Starrett J.E. Hopkinson bar techniques for dynamic recovery experiments. Proceedings of Royal Society of London A. 435:1991;371-391.
29. Nicholas T. Tensile testing of materials at high rates of strain. Experimental Mechanics. 1981;177-185.
30. Nicholas T., Bless S.J. High strain rate testing. Metals Handbook, 13th ed. vol. 8:1991;208-214 American Society of Materials.
31. Recina, V., 2000. Mechanical Properties of Gamma Titanium Aluminides 1577. Chalmers Technical University.
32. Rosenberg Z., Dawicke D., Strader E., Bless S.J. A new technique for heating specimens in split-Hopkinson bar experiments using induction coil heaters. Experimental Mechanics. 26(2):1986;275-278.
33. Staab G.H., Gilat A. A direct tension split Hopkinson bar for high strain rate testing. Experimental Mechanics. 31(3):1991;232-235.
34. Vaidya R.U., Jin Z., Cady C., Gray G. III, Butt D.P. A comparative study of the strain rate and temperature dependent compression behavior of Ti-46.5Al-3Nb-2Cr-0.2W and Ti-25Al-10Nb-3V-1Mo Intermetallic alloys. Scripta Materialia. 41(6):1999;569-574.
35. Venskutonis K.R. Gamma-met 100 titanium aluminide sheet production and component fabrication. Preparing for the Future. 10(2):2000;2-3.
36. Wang Y., Dongliang L., Law C. Brittle to ductile transition temperature and its strain rate sensitivity in a two phase titanium aluminide with near lamellar microstructure. Journal of Materials Science. 34:1999;3155-3159.
37. Wang Y., Dongliang L., Kim Y.-W. High strain rate tensile properties of TiAl alloy in duplex and fully lamellar microstructural forms. Transactions of Non-Ferrous Metals Society of China. 9(3):1999;437-441.
38. Wang Y., Lin D., Zhou Y., Law C. Dynamic tensile properties of Ti-47Al-2Mn-2Nb alloy. Journal of Materials Science. 34:1999;509-513.
39. Wang Y., Dongliang L., Law C. The affect of boron addition on brittle to ductile transition temperature and its strain rate sensitivity in Gamma Titanium Aluminide. Journal of Materials Science. 35:2000;3083-3087.
40. Wright P.K. On ductility and toughness requirements for intermetallics in aircraft engines. Darolia R. Structural Intermetallics. 1993;The Minerals, Metals and Materials Society.
41. Yamagushi M.I.H. TiAl compounds for structural applications. Structural Intermetallics. 1993;127-142 The Minerals, Metals and Materials Society.
42. Kim Y.-W. Intermetallic alloys based on gamma titanium aluminides. Journal of Metals. 41(7):1989;24-30.