A wideband lumped circuit model of the terminal and internal electromagnetic response of rotating machine windings with a coaxial insulation system

IEEE Transactions on Energy Conversion

Volumn 19, Issue 3, 2004, Pages 539-546

  Holmberg, Pär ^a   Leijon, Mats ^a   Johansson, Stefan ^b  

^a UPPSALA UNIVERSITY   (Sweden)

^b ABB CORPORATE RESEARCH   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DISTRIBUTED PARAMETER NETWORKS; EDDY CURRENTS; ELECTRIC LOSSES; ELECTRIC MACHINE INSULATION; FREQUENCY RESPONSE; LUMPED PARAMETER NETWORKS; MATHEMATICAL MODELS; OVERVOLTAGE PROTECTION; ROTATING MACHINERY; TRANSIENTS;

CIRCUIT MODELING; CIRCUIT TRANSIENT ANALYSIS; COAXIAL INSULATION SYSTEM; ELECTROMAGNETIC RESPONSE; ELECTROMAGNETIC TRANSIENT ANALYSIS; ROTATING MACHINE TRANSIENT ANALYSIS;

MACHINE WINDINGS;

EID: 4544247563     PISSN: 08858969     EISSN: None     Source Type: Journal    
DOI: 10.1109/TEC.2003.822315     Document Type: Article

References (35)

1. R. E. Adjaye and K. J. Cornick, "Distribution of switching surges in the line-end coils of cable-connected motors," Elect. Power Applicat., vol. 2, no. 1, pp. 11-21, Feb; 1979.
2. J. L. Guardado and K. J. Cornick, "A computer model for calculating steep-fronted surge distribution in machine windings," IEEE Trans. Energy Conversion, vol. 4, pp. 95-101, Mar. 1989.
3. J. L. Guardado, "Calculation of machine winding electrical parameters at high frequencies for switching transient studies," IEEE Trans. Energy Conversion, vol. 11, pp. 33-40, Mar. 1996.
4. J. L. Guardado, K. J. Cornick, V. Venegas, J. L. Naredo, and E. Melgoza, "A three-phase model for surge distribution studies in electrical machines," IEEE Trans. Energy Conversion, vol. 12, pp. 24-31, Mar. 1997.
5. K. McLeay, "Voltage distribution in electrical machine stator coils due to fast fronted switching surges," Ph.D. dissertation, Dept. Elect., Electron. Comput. Eng., Heriot-Watt Univ., Edinburgh, U.K., 1982.
6. M. T. Wright, S. J. Yang, and K. McLeay, "General theory of fast-fronted interturn voltage distribution in electrical machine windings," Proc. Inst. Elect. Eng. B, vol. 130, no. 4, pp. 245-256, July 1983.
7. P. G. McLaren and H. Oraee, "Multiconductor transmission-line model for the line-end coil of large AC machines," Proc. Inst. Elect. Eng. B, vol. 132, no. 3, pp. 149-156, May 1985.
8. H. Oraee and P. G. McLaren, "Surge voltage distribution in line-end coils of induction motors," IEEE Trans. Power App. Syst., vol. PAS-104, pp. 1843-1848, July 1985.
9. P. G. McLaren and M. H. Abdel-Rahman, "Modeling of large AC motor coils for steep-fronted surge studies," IEEE Trans. Ind. Applicat., vol. 24, pp. 422-426, May/June 1988.
10. W. W. L. Keerthipala and P. G. McLaren, "Modeling of effects of laminations on steep fronted surge propagation in large ac motor coils," IEEE Trans. Ind. Applicat., vol. 27, pp. 640-644, July/Aug. 1991.
11. R. G. Rhudy, E. L. Owen, and D. K. Sharma, "Voltage distribution among the coils and turns of a form wound AC rotating machine exposed to impulse voltage," IEEE Trans. Energy Conversion, vol. EC-1, pp. 50-60, June 1986.
12. A. Narang, B. K. Gupta, E. P. Dick, and D. K. Sharma, "Measurement and analysis of surge distribution in motor stator windings," IEEE Trans. Energy Conversion, vol. 4, pp. 126-134, Mar. 1989.
13. P. J. Tavner and R. J. Jackson, "Coupling of discharge currents between conductors of electrical machines owing to laminated steel core," Proc. Inst. Elect. Eng. B, vol. 135, no. 6, pp. 295-307, Nov. 1988.
14. M. Leijon, L. Gertmar, H. Frank, J. Martinsson, T. Karlsson, B. Johansson, K. Isaksson, and U. Wollström, "Breaking Conventions in Electrical Power Plants," Cigré, Paris, France, Paper 11/37-03, 1998.
15. A. Jaksts, S. Forsmark, and M. Leijon, "Power Transformers for the 21'ST Century," in IEEE Power Tech. Conf., Paper BPT99-477-3, Budapest, Hungary, Aug. 29-Sept. 2 1999.
16. P. Holmberg and M. Leijon, "A wide-band lumped circuit model of the terminal and internal electromagnetic response of a coil with a coaxial insulation system," IEE Electric Power Applications, 2000. submitted for publication.
17. P. Holmberg, "A wide-band lumped circuit model of the terminal and internal electromagnetic response of coaxially insulated windings mounted on a core," European Transactions on Electrical Power, 2000. submitted for publication.
18. P. Holmberg, "Modeling the transient response of windings, laminated steel cores and electromagnetic power devices by means of lumped circuits," Ph.D. dissertation, Inst. High Voltage Res., Uppsala Univ., Uppsala, Sweden, 2000.
19. P. A. Abetti and F. J. Maginniss, "Natural frequencies of coils and windings determined by equivalent circuit," AIEE Trans. Part III. Power App. Syst., vol. 72, pp. 495-504, June 1953.
20. P. Kundur, Power System Stability and Control. New York: McGraw-Hill, 1994.
21. P. J. Lawrenson, "Calculation of machine end-winding inductances with special reference to turbogenerators," Proc. Inst. Elect. Eng., vol. 117, no. 6, pp. 1129-1134, June 1970.
22. D. K. Cheng, Field and Wave Electromagnetics. Reading, MA: Addison-Wesley, 1989.
23. P. Holmberg, "A lumped circuit approach to model electromagnetic transients in coils, considering a moving geometry, magnetic hysteresis and heating," Ph.D. dissertation, Royal Institute of Tech., Stockholm, Sweden, 1996.
24. G. Slemon, Electric Machines and Drives. Reading, MA: Addison-Wesley, 1992.
25. F. de León, "Transformer model for the study of electromagnetic transients," Ph.D. dissertation, Univ. Toronto, Toronto, ON, Canada, 1992.
26. F. de León and A. Semlyen, "Time domain modeling of eddy current effects for transformer transients," IEEE Trans. Power Delivery, vol. 8, pp. 271-280, Jan. 1993.
27. F. de León, "Complete transformer model for electromagnetic transients," IEEE Trans. Power Delivery, vol. 9, pp. 231-239, Jan. 1994.
28. F. de León, "A simple representation of dynamic hysteresis losses in power transformers," IEEE Trans. Power Delivery, vol. 10, pp. 315-321, Jan. 1995.
29. E. J. Tarasiewicz, A. S. Morched, A. Narang, and E. P. Dick, "Frequency dependent eddy current models for nonlinear iron cores," IEEE Trans. Power Syst., vol. 8, pp. 588-597, May 1993.
30. P. Holmberg, A. Bergqvist, and G. Engdahl, "Modeling eddy currents and hysteresis in a transformer laminate," IEEE Trans. Magn., vol. 33, pp. 1306-1309, Mar. 1997.
31. P. Holmberg, "Modeling a magnetomechanical drive by a coupled magnetic, electric and mechanical lumped circuit approach," J. Appl. Phys., pt. 2A, vol. 81, no. 8, pp. 4091-4093, Apr. 1997.
32. D.-X. Chen and J. L. Muñoz, "Theoretical eddy-current permeability spectra of slabs with bar domains," IEEE Trans. Magn., vol. 33, pp. 2229-2244, May 1997.
33. P. Holmberg, M. Leijon, and T. Wass, "A wide-band lumped circuit model of eddy current losses in a coil with a coaxial insulation system and a stranded conductor," IEEE Trans. Power Delivery, vol. 18, pp. 50-60, Jan. 2003.
34. J. Vlach and K. Singhal, Computer Methods for Circuit Analysis and Design. New York: Van Nostrand, 1983.
35. A. Greenwood, Electrical Transients in Power Systems. New York: Wiley, 1991.