Advanced combustion for low emissions and high efficiency: A literature review of HCCI combustion concepts

CONCAWE Reports

Volumn , Issue 4, 2008, Pages

  Cracknell, R ^a   Ariztegui, J ^a   Barnes, K ^a   Bessonette, P ^a   Cannella, W ^a   Douce, F ^a   Kelecom, B ^a   Kraft, H ^a   Lampreia, I ^a   Rickeard, D J ^a   Savarese, M C ^a   Williams, J ^a   Rose, K D ^a  

^a NONE

Author keywords

Alternative fuels; Biofuels; Cetane number; Combustion; Controlled auto ignition (CAI); Diesel; Exhaust emissions; Fuel; Gasoline; Homogeneous charge compression ignition (HCCI); Internal combustion engine technology; MON; Octane number; RON

Indexed keywords

EID: 45149122032     PISSN: 01660810     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (89)

1. Hochhauser, A.M. et al (2006) Impact of fuel sulfur on gasoline and diesel vehicle emissions. SAE Paper No. 2006-01-3370. Warrendale PA: Society of Automotive Engineers
2. EUCAR, CONCAWE and JRC (2006) Well-To-Wheels analysis of future automotive fuels and powertrains in the European context. Version 2b, May 2006. Ispra: EU Commission Joint Research Centre, Institute for Environment and Sustainability (http://ies.jrc.ec.europa.eu/WTW)
3. ExxonMobil (2006) The outlook for energy - a view to 2030. 2006 version. Irving TX: ExxonMobil (http://www.exxonmobil.com)
4. Farrell, J.T. et al (2006) A second law analysis of high efficiency low emission gasoline engine concepts. SAE Paper No. 2006-01-0491. Warrendale PA: Society of Automotive Engineers
5. Jackson, N.S. and Wotton, C.R.N. (1990) The effects of ceramic thermal insulation on DI diesel engine combustion, emissions and heat transfer. CARE Consortium Conference, June 1990. London: UK Department of Trade & Industry
6. Akihama, K. et al (2001) Mechanism of the smokeless rich diesel combustion by reducing temperature. SAE Paper No. 2001-01-0655. Warrendale PA: Society of Automotive Engineers
7. Walter, B. and Gatellier, B. (2002) Development of the high power NADI™ concept using dual mode diesel combustion to achieve zero NOx and particulate emissions. SAE Paper No. 2002-01-1744. Warrendale PA: Society of Automotive Engineers
8. Duret, P. et al (2004) Progress in diesel HCCI combustion within the European SPACE LIGHT project. SAE Paper No. 2004-01-1904. Warrendale PA: Society of Automotive Engineers
9. Walter, B. et al (2004) Improvement of exhaust and noise emissions of the NADI™ concept using pre-mixed type combustion with multiple stages injection. SIA International Congress: The diesel engine: today and tomorrow, 12-13 May 2004, Lyon
10. th Aachen Colloquium "Automobile and Engine Technology", 4-6 October 2004, Aachen
11. Kimura, S. et al (1999) New combustion concept for ultra-clean and high-efficiency small DI diesel engines. SAE Paper No. 1999-01-3681. Warrendale PA: Society of Automotive Engineers
12. Kimura, S. et al (2002) An experimental analysis of low-temperature and premixed combustion for simultaneous reduction of NOx and particulate emissions in direct injection diesel engines. Intl J Engine Research 3, 4, 249-259
13. Yanagihara, H. (2005) Uniform bulky combustion system (UNIBUS): key points for further research. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
14. Weissbäck, M. et al (2003) Alternative Brennverfarhren - ein Ansatz für den zukünftigen Pkw-Dieselmotor. MTZ 64, 9, 718-727
15. Ryan, T. (2006) HCCI - update of progress 2005. 12th Diesel Engine-Efficiency and Emissions Research (DEER) Conference, August 20-24, 2006, Detroit MI
16. Kook, S. et al (2005) The influence of charge dilution and injection timing on lowtemperature diesel combustion and emissions. SAE Paper No. 2005-01-3837. Warrendale PA: Society of Automotive Engineers
17. Kalghatgi, G.T. (2006) Advantages of fuels with high resistance to auto-ignition in late injection, low-temperature, compression ignition combustion. SAE Paper No. 2006-01-3385. Warrendale PA: Society of Automotive Engineers
18. 2 engines?", 22-23 September 2004, Rueil-Malmaison, France
19. Szybist, J.P. and Bunting, B.G. (2005) Cetane number and engine speed effects on diesel HCCI performance and emissions. SAE Paper No. 2005-01-3723. Warrendale PA: Society of Automotive Engineers
20. Lewis, S.A. et al (2005) Partial oxidation products and other hydrocarbon species in diesel HCCI exhaust. SAE Paper No. 2005-01-3737. Warrendale PA: Society of Automotive Engineers
21. Shen, Y. et al (2006) Influences of intake charge preparations on HCCI combustion in a single cylinder engine with variable valve timing and gasoline direct injection. SAE Paper No. 2006-01-3274. Warrendale PA: Society of Automotive Engineers
22. Kalian, N. et al (2005) Effects of ignition timing on CAI combustion in a multi-cylinder DI gasoline engine. SAE Paper No. 2005-01-3720. Warrendale PA: Society of Automotive Engineers
23. Ogawa, H. et al (2006) Dependence of ultra-high EGR and low temperature diesel combustion on fuel injection conditions and compression ratio. SAE Paper No. 2006-01-3386. Warrendale PA: Society of Automotive Engineers
24. Colliou, T. et al (2006) Adapting the NADI™ concept to heavy duty engines. Oil & Gas Science and Technology - Rev. IFP 61, 1, 73-84
25. Amann, M. et al (2006) Evaluation of HCCI engine potentials in comparison to advanced gasoline and diesel engines. SAE Paper No. 2006-01-3249. Warrendale PA: Society of Automotive Engineers
26. Schwaderlapp, M. et al (2002) Variable compression ratio - a design solution for fuel economy concepts. SAE Paper No. 2002-01-1103. Warrendale PA: Society of Automotive Engineers
27. Duffy, K. et al (2006) Heavy duty HCCI development activities - DOE High Efficiency Clean Combustion (HECC). DOE Contract DE-FC26-05NT42412. 12th Diesel Engine-Efficiency and Emissions Research (DEER) Conference, August 20-24, 2006, Detroit MI
28. Roberts, M. (2003) Benefits and challenges of variable compression ratio (VCR). SAE Paper No. 2003-01-0398. Warrendale PA: Society of Automotive Engineers
29. Aleiferis, P.G. et al (2006) Autoignition initiation and development of n-heptane HCCI combustion assisted by inlet air heating, internal EGR or spark discharge: an optical investigation. SAE Paper No. 2006-01-3273. Warrendale PA: Society of Automotive Engineers
30. Dec, J.E. (2005) Understanding HCCI charge stratification using optical, conventional, and computational diagnostics. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
31. Sjöberg, M. et al (2005) Potential of thermal stratification and combustion retard for reducing pressure-rise rates in HCCI engines, based on multi-zone modelling and experiments. SAE Paper No. 2005-01-0113. Warrendale PA: Society of Automotive Engineers
32. Urushihara, T. (2005) A trial to control combustion speed in gasoline-fueled HCCI engine through temperature gradient in mixture. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
33. Yu, R. et al (2006) Effect of turbulence and initial temperature inhomogeneity on homogeneous charge compression ignition combustion. SAE Paper No. 2006-01-3318. Warrendale PA: Society of Automotive Engineers
34. Lim, O.T. et al (2006) The research about the effects of thermal stratification on n-heptane/iso-octane-air mixture HCCI combustion using a rapid compression machine. SAE Paper No. 2006-01-3319. Warrendale PA: Society of Automotive Engineers
35. Lang, O. et al (2005) Thermodynamical and mechanical approach towards a variable valve train for the controlled auto ignition combustion process. SAE Paper No. 2005-01-0762. Warrendale PA: Society of Automotive Engineers
36. Aldén, M. and Richter, M. (2005) Development and application of laser/optical techniques for HCCI diagnostics. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
37. Li, T. et al (2006) Dependence of ultra-high EGR low temperature diesel combustion on fuel properties. SAE Paper No. 2006-01-3387. Warrendale PA: Society of Automotive Engineers
38. Duffy, K. et al (2006) HCCI for heavy duty vehicles: new development & future prospects. Hart World Refining & Fuels Conference, May 30 - June 1, 2006, Brussels
39. Kawano, D. et al (2004) Effects of fuel properties on combustion and exhaust emissions of homogeneous charge compression ignition (HCCI) engine. SAE Paper No. 2004-01-1966. Warrendale PA: Society of Automotive Engineers
40. Bessonette, P.W. et al (2007) Effects of fuel property changes on heavy-duty HCCI combustion. SAE Paper No. 2007-01-0191. Warrendale PA: Society of Automotive Engineers
41. Kalghatgi, G.T. and Head, R.A. (2006) Combustion limits and efficiency in a homogeneous charge compression ignition engine. Int J Engine Research 7, 3, 215-236
42. Risberg, P. et al (2005) Auto-ignition quality of diesel-like fuels in HCCI engines. SAE Paper No. 2005-01-2127. Warrendale PA: Society of Automotive Engineers
43. Risberg, P. et al (2003) Auto-ignition quality of gasoline-like fuels in HCCI engines. SAE Paper No. 2003-01-3215. Warrendale PA: Society of Automotive Engineers
44. Risberg, P. et al (2004) The influence of EGR on auto-ignition quality of gasolinelike fuels in HCCI engines. SAE Paper No. 2004-01-2952. Warrendale PA: Society of Automotive Engineers
45. Kalghatgi, G.T. (2005) Auto-ignition quality of practical fuels and implications for fuel requirements of future SI and HCCI engines. SAE Paper No. 2005-01-0239. Warrendale PA: Society of Automotive Engineers
46. Kalghatgi, G.T. (2007) Partially pre-mixed auto-ignition of gasoline to attain low smoke and low NOx at high load in a compression ignition engine and comparison with a diesel fuel. SAE Paper No. 2007-01-0006. Warrendale PA: Society of Automotive Engineers
47. Gnanam, G. et al (2006) An HCCI engine fuelled with iso-octane and ethanol. SAE Paper No. 2006-01-3246. Warrendale PA: Society of Automotive Engineers
48. Shudo, T. et al (2006) Influence of carbon dioxide on combustion in an HCCI engine with the ignition-control by hydrogen. SAE Paper No. 2006-01-3248. Warrendale PA: Society of Automotive Engineers
49. Steinhilber, T. and Sattelmayer, T. (2006) The effect of water addition on HCCI diesel combustion. SAE Paper No. 2006-01-3321. Warrendale PA: Society of Automotive Engineers
50. Xu, H. et al (2005) CHARGE and CHASE: the UK Foresight Vehicle research on extending HCCI engine operating boundaries. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
51. Hosseini, V. and Checkel, M.D. (2006) Using reformer gas to enhance HCCI combustion of CNG in a CFR engine. SAE Paper No. 2006-01-3247. Warrendale PA: Society of Automotive Engineers
52. Heinen, F. (2006) New developments for emission standards in Europe. Motor Vehicle Emissions Control Workshop (MoVE), 14-17 May 2006, Hong Kong (http://www.vecc-sepa.org.cn/eng/news/MoVE2006/publication.htm)
53. Mehresh, P. et al (2005) Combustion timing in HCCI engines determined by ionsensor: experimental and kinetic modeling. Proceedings of the Combustion Institute 30, 2701-2709
54. Akagawa, H. et al (1999) Approaches to solve problems of premixed lean diesel combustion. SAE Paper No. 1999-01-0183. Warrendale PA: Society of Automotive Engineers
55. Homan, H.S. (1983) The dependence of soot yield on flame conditions - a unifying picture. Combustion Science and Technology 33, 1-15
56. Pickett, L.M. and Siebers, D.L. (2004) Non-sooting, low flame temperature mixingcontrolled DI diesel combustion. SAE Paper No. 2004-01-1399. Warrendale PA: Society of Automotive Engineers
57. Reitz, R.D. et al (2005) CFD modeling of diesel HCCI. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
58. Zheng, J. et al (2005) Two types of autoignition and their engine applications. SAE Paper No. 2005-01-0178. Warrendale PA: Society of Automotive Engineers
59. EPEFE (1995) European programme on emissions, fuels and engine technologies. EPEFE Report on behalf of ACEA and EUROPIA
60. Ricardo (2005/6/7) Consultancy presentations to CONCAWE, 17 November 2005, 8 November 2006 and 7 November 2007, Brussels
61. AVL (2005/6) Consultancy presentations to CONCAWE, 16 November 2005 and 7 November 2006, Brussels
62. th Diesel Engine Emissions Reduction (DEER) Conference, August 24-28, 2003, Newport RI
63. EPI (2007) Break Mean Effective Pressure. (http://www.epi-eng.com/ET-BMEP.htm)
64. 2 emissions from land transportation: engine design consideration. First Regional Symposium on Carbon Management, 22-24 May 2006, Dhahran, Saudi Arabia
65. Jelitto, C. et al (2006) Challenge of a gasoline compression ignition demonstrator. Dresden: November 2006
66. th Diesel Engine Emissions Reduction (DEER) Conference, August 28-September 2, 2004, Coronado CA
67. Hyvönen, J. et al (2005) The effect of displacement on air-diluted multi-cylinder HCCI engine performance. SAE Paper No. 2006-01-0205. Warrendale PA: Society of Automotive Engineers
68. Ryan, T. (2005) Fuel requirements for full time HCCI engines. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
69. Kalghatgi, G.T. (2001) Fuel anti-knock quality - Part 1. Engine studies. SAE Paper No. 2001-01-3584. Warrendale PA: Society of Automotive Engineers
70. Kalghatgi, G.T. (2001) Fuel anti-knock quality - Part 2: Vehicle studies - How relevant is Motor Octane Number (MON) in modern engines? SAE Paper No. 2001-01-3585. Warrendale PA: Society of Automotive Engineers
71. Kalghatgi, G.T. and Head, R.A. (2001) The available and required auto-ignition quality of gasoline-like fuels in HCCI engines at high temperatures. SAE Paper No. 2004-01-1969. Warrendale PA: Society of Automotive Engineers
72. Shimazaki, N. et al (2003) Dual mode combustion concept with premixed diesel combustion by direct injection near top dead center. SAE Paper No. 2003-01-0742. Warrendale PA: Society of Automotive Engineers
73. Farrell, J.T. and Bunting, B.G. (2006) Fuel composition effects at constant RON and MON in an HCCI engine operated with negative valve overlap. SAE Paper No. 2006-01-3275. Warrendale PA: Society of Automotive Engineers
74. Duffy, K. et al (2005) Heavy duty HCCI development. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
75. Steiger, W. and Kohnen, C. (2006) New combustion systems based on a new fuel specification. 27th International Vienna Motor Symposium, 27-28 April 2006, Vienna
76. Steiger, W. (2006) Future powertrains and fuels for sustainable mobility. IMechE Conference on cost effective low carbon powertrains for future vehicles, 6-7 November 2006, London
77. Musculus, M.P.B. and Lachaux, T. (2006) Visualization of UHC emissions for lowtemperature diesel engine combustion. 12th Diesel Engine-Efficiency and Emissions Research (DEER) Conference, August 20-24, 2006, Detroit MI
78. CONCAWE (2004) Fuel effects on emissions from modern gasoline vehicles. Part 2 - aromatics, olefins and volatility effects. Report No. 2/04. Brussels: CONCAWE
79. CONCAWE (2002) Evaluation of diesel fuel cetane and aromatics effects on emissions from euro-3 engines. Report No. 4/02. Brussels: CONCAWE
80. CONCAWE (2005) Fuel effects on emissions from advanced diesel engines and vehicles. Report No. 2/05. Brussels: CONCAWE
81. Bergstrand, P. (2007) Effects on combustion by using kerosene or MK1 diesel. SAE Paper No. 2007-01-0002. Warrendale PA: Society of Automotive Engineers
82. Lepperhoff, G. et al (1999) Determination of an aromatic content threshold in diesel fuels concerning the soot/particulate and gaseous pollutant emissions. Contract JOF_3-CT-97_0030, in the framework of the European Commission Non Nuclear Energy Programme, JOULE III
83. Bunting, B.G. (2005) Fuel chemistry and cetane effects on diesel HCCI performance, combustion, and emissions. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
84. EU (2003) Market development of alternative fuels. Report of the Alternative Fuels Contact Group. Brussels: European Commission
85. Wagner, R. and Sluder, S. (2006) Evaluation of High Efficiency Clean Combustion (HECC) strategies for meeting future emissions regulations in light-duty engines. 12th Diesel Engine-Efficiency and Emissions Research (DEER) Conference, August 20-24, 2006, Detroit MI
86. Tunestål, P. (2005) Closed-loop combustion control activities in Lund. SAE Homogeneous Charge Compression Ignition (HCCI) Symposium, 18-20 September 2005, Lund, Sweden
87. Güralp, O.A. et al (2006) Characterizing the effect of combustion chamber deposits on a gasoline HCCI engine. SAE Paper No. 2006-01-3277. Warrendale PA: Society of Automotive Engineers
88. Barbour, R.H. et al (2000) Understanding diesel lubricity. SAE Technical Paper No. 2000-01-1918. Warrendale PA: Society of Automotive Engineers
89. Tanaka, S. et al (2003) Two-stage ignition in HCCI combustion and HCCI control by fuels and additives. Combustion and Flame 132, 219-239