Multiscale computational damage modelling of laminate composites

CISM International Centre for Mechanical Sciences, Courses and Lectures

Volumn 474, Issue , 2005, Pages 171-212

  Pierre, Ladevèze ^a  

^a CNRS   (France)

Author keywords

Delamination Crack; Energy Release Rate; Final Fracture; Laminate Composite; Transverse Crack

Indexed keywords

EID: 44649131140     PISSN: 02541971     EISSN: 23093706     Source Type: Book Series    
DOI: 10.1007/3-211-38102-3_5     Document Type: Chapter

References (86)

1. Aboudi, L., Lee, S. W., and Herakowich, C. T. (1988). Three dimensional analysis of laminates with cross cracks. ^^M^* J. Appl Mech. 55: 389-397.
2. Allen, D. H., Groves, S. E., and Harris, C. E. (1988). A cumulative damage model for continuous fiber composite laminates with matrix cracking and interply delaminations. In Withcomb, J. D., ed., Composite Materials: Testing and Design. ASTM STP 972, Washington, DC, USA.. 57-80.
3. Allix, O. (1992). Damage analysis of delamination around a hole. In Ladeveze, P., and Zienkiewicz, O. C, eds.. New Advances in Computational Structural Mechanics, Elsevier Science Publishers B. V. All-All.
4. Allix, O. (2002). Interface damage mechanics: application to delamination. In Allix, O., and Hild, R, eds.. Continuum Damage Mechanics of Materials and Structures, Elsevier. 295-324.
5. Allix, O., Bahlouli, N., Cluzel, N., and Perret, C. (1996). Modelling and identification of temperature-dependent mechanical behavior of the elementary ply in carbon/epoxy laminates. Comp. Sci. Techn. 56: 883-888.
6. Allix, O., and Deii, J. F. (1997). Delay-damage modeling for fracture prediction of laminated composites under dynamic loading. Engineering Transactions 45: 29-46.
7. Allix, O., Guedra-Degeorges, D., Guinard, S., and Vinet, A. (1999). 3D analysis applied to low-energy impacts on composite laminates. In Masard, L, and Vautrin, A., eds., Proceedings ICCM12T. 282-283.
8. AlHx, O., and Johnson, A. (1992). Interlaminar interface modelling for the prediction of laminate delamination. Comp. Sci. Techn.
9. Allix, O., and Ladeveze, P. (2004). Advances in the statics and dynamics of delamination-Special issue. Composite Structures 22: 235-242.
10. Allix, O., Ladeveze, P., and Vitecoq, E. (1994). Modelling and identification of the mechanical behaviour of composite laminates in compression. Comp. Sci. Techn. 51: 35-42.
11. Allix, O., Leveque, D., and Perret, L. (1998). Interlaminar interface model identification and forecast of delamination in composite laminates. Comp. Sci. Techn. 56: 671-678.
12. Bazant, Z., and Pijaudier-Cabot, G. (1988). Non local damage: continuum model and locaUsation instability. J. Appl. Mech. 287-294.
13. Belytschko, T., and Lasry, D. (1988). Localisation limiters and numerical strategies softening materials. In Mazars, J., and Bazant, Z. P., eds., Amsterdam: Elsevier. 349-362.
14. Berthelot, J. M.O (2003). Transverse cracking and delamination in cross-ply glass-fiber and carbon-fiber renforced plastic laminates: static and fatigue loading. Appl. Mech. Rev. 56(1): 1-37.
15. Berthelot, J. M., and Le Corre, J. F. (2000). Statistical analysis of the progression of transverse cracking and delamination in cross-ply laminates. Comp. Sci. Techn. 60: 2659-2669.
16. Berthelot, J. M., Leblond, P., El Mahi, A., and Le Corre, J. F. (1996). Transverse cracking of cross-ply laminates, Part 1: Analysis. Composites. 21K: 989-1001.
17. Boniface, L., Smith, P., Bader, M., and Rezaifard, A. (1997). Transverse ply cracking in cross-ply CFRP laminates-Initiation or propagation controlled? J. Comp. Materials. 31: 1080-1112.
18. Grossman, F. W., and Wang, A. S. D. (1982). The dependence of transverse cracking and delamination on ply thickness in graphite/epoxy laminates. In Reisnider, K. L., ed.. Damage in Composite Materials, ASTM STP 775. 118-139.
19. Daudeville, L., and Ladeveze, P. (1993). A damage mechanics tool for laminate delamination. Composite Structures. 25: 547-555.
20. Devries, F., Dumontet, H., Duvaut, G., and Lene, F. (1989). Homogenization and damage for composite structures. Int. J. for Numerical Methods in Engineering. 27: 285-298.
21. Dvorak, G. J., and Laws, N. (1987). Analysis of progressive matrix cracking in composite laminates, 11. First ply failure, Comp. Materials. 21: 309-329.
22. Espinoza, H. D. (1995). On the dynamic shear resistance of ceramic composites and its dependence on appUed multiaxial deformation. Int. J. Solids and Structures. 3105-3128.
23. Feyel, F. (2003). A multilevel finite element method (FE^) to describe the response of highly non-linear structures using generalized continua. Comput. Meth. Appl. Mech. Engrg. 192: 3233-3244.
24. Fish, J., Sheck, K., Pandheeradi, M., and Shepard, M. S. (1997). Computational plasticity for composite structures based on mathematical homogenization: theory and practice. Comput. Meth. Appl. Mech. Engrg. 148:53-73.
25. Fukunaga, H., Chou, T. W., Peters, P. W. M., and Schulte, K. (1984). Probabihstic failure strength analyses of graphite/epoxy cross-ply laminates. J. Comp. Materials. 18: 339-356.
26. Garrett, K. W., and Bailey, J. E. (1977). Multiple transverse fracture in 90° cross-ply laminates of a glass fiber reinforced polyester. J. Mater Sci. 12: 157-168.
27. Geers, M., Kouznetsova, V., and Brekelmans, W. (2003). Mulfiscale first-order and second-order computational homogenization of microstructures towards continua. Int. J. for Multiscale Computational Engineering. 1(4): 371-386.
28. Ghosh, S., Lee, K., and Moorthy, S. (1995). Multiple scale analysis of heterogeneous elastic structures using homogenization theory and Voronoi* cell finite element method. J. Solids Structures. 32(1): 27-62.
29. Gudmunson, P., and Zang, W. (1993). An analyfical model for thermoelastic properties of composite laminates containing transverse matrix cracks. Int. J. Solids Structures. 30: 3211-3231.
30. Guild, F. J., Ogin, S. L., and Smith, P. A. (1993). Modelling of 90° ply cracking in cross ply laminates, including three-dimensional effects. J. Comp. Materials. 27: 646-667.
31. Hashemi, S., Kinloch, A., and Williams, J. (1990). Mechanics and mechanisms of delamination in a poly (ether sulphone)-fiber composite. Comp. Sci. Techn. 37: 429-462.
32. Hashin, Z. (1985). Analysis of cracked laminates: a variational approach. Mech. Mater. 4: 121-136.
33. Hashin, Z. (1985). Analysis of orthogonally cracked laminates under tension. ASME J. Appl. Mech. 4: 121-136.
34. Hashin, Z. (1996). Finite thermoelastic fracture criterion with applicadon to laminate cracking analysis. J. Mech. Phys. Solids. 44(7): 1129-1145.
35. Herakovich, C. (1998). Mechanics of Fibrous Composites, J. Wiley, ed.
36. Highsmith, A. L., and Reifsnider, K. L. (1982). Stiffness reduction mechanisms in composite laminates. In Reisnider, K. L., ed.. Damage in Composite Materials, ASTM STP 775. 103-117.
37. Kouznetsova, V., Geers, M. G. D., and Brekelmans, W. A. M. (2003). Multiscale constitutive modelling of heterogeneous materials with a gradient-enhanced computational homogenization scheme. Int. J. for Numerical Methods in Engineering. 54: 1235-1260.
38. Ladeveze, P. (1983). On an anisotropic damage theory. In Boehler, J. P., ed., Failure Criteria of Structured Media, Report n° 34-LMT-Cachan, Balkema. 355-364.
39. Ladeveze, P. (1986). About the damage mechanics of composites. In Bathias, C, and Menkes, D., eds., Comptes-Rendus desJNCS, Paris: Pluralis Publication. 667-683.
40. Ladeveze, P. (1989). About a damage mechanics approach. In Mechanics and Mechanisms of Damage in Composite and Multimaterials, ME P. 119-142.
41. Ladeveze, P. (1992). A damage computational method for composite structures. J. Computer and Structure. 44(\/2):19-S7.
42. Ladeveze, P. (1995). A damage computational approach for composites: Basic aspects and micromechanical relations. Comput. Mech. 8: 142-150.
43. Ladeveze, P. (2000). Modelling and computation until final fracture of laminate composites. In Cardon, A. H., et al., eds.. Recent Developments in Durability Analysis of Composite Systems, Balkema. 39-47.
44. Ladeveze, P., Allix, O., Deii, J. F., and Leveque, D. (2000). A mesomodel for localisation and damage computation in laminates. Comput. Meth. Appl. Mech. Engrg. 1832: 105-122.
45. Ladeveze, P., Allix, O., Gomet, L., Leveque, D., and Ferret, L. (1998). A computational damage mechanics approach for laminates: Identification and comparison with experimental results. In Voyiadjis, G. Z., Wu, J. W., and Chaboche, J. L., eds., Damage Mechanics in Engineering Materials, Amsterdam: Elsevier. 481-500.
46. Ladeveze, P., and Le Dantec, E. (1992). Damage modeling of the elementary ply for laminated composites. Comp. Sci. Techn. 43(3): 257-267.
47. Ladeveze, P., Loiseau, O., and Dureisseix, D. (2001). A micro-macro and parallel computational strategy for highly heterogeneous structures. Int. J. for Numerical Methods in Engineering. 52: 121-138.
48. Ladeveze, P., and Lubineau, G. (2001). On a damage mesomodel for laminates: micro-meso relationships, possibilities and limits. Comp. Sci. Techn. 61(15): 2149-2158.
49. Ladeveze, P., and Lubineau, G. (2001). On a damage mesomodel for laminates: micromechanics basis and improvement. Mech. Materials. 35: 763-775.
50. Ladeveze, P., and Lubineau, G. (2002). An enhanced mesomodel for laminates based on micromechanics. Comp. Sci. Techn. 62: 533-541.
51. Ladeveze, P., Lubineau, G., and Marsal, D. (2004). Towards a bridge between the micro-and the mesomechanics of delamination for laminated composites. Comp. Sci. Techn. Manuscript submitted for publication.
52. Ladeveze, P., and Nouy, A. (2003). On a multiscale computational strategy with time and space homogenization for structural mechanics. Comput. Meth. Appl. Mech. Engrg. 192: 3061-3087.
53. Lagattu, F., and Lafarie-Frenot, M. (2000). Variation of PEEK matrix crystallinity in APC-2 composite subjected to large shearing deformation. Comp. Sci. Techn. 60: 605-612.
54. Laws, N., and Dvorak, G. J. (1988). Progressive transverse cracking in composite laminates. J. Comp. Marerials. 22: 900-916.
55. Li, D. S., and Wisnom, M. (1997). Evaluating Weibull parameters for transverse cracking in cross-ply laminates. J. Comp. Materials. 31(9): 935-951.
56. Loret, B., and Prevost, J. H. (1990). Dynamic strain locaUzation in elasto-(visco-)plastic solids. Part 1. General formulation and one-dimensional examples. Comput. Meth. Appl. Mech. Engrg. 83: 247-273.
57. Manders, P. W., Chou, T. W., Jones, F. R., and Rock, J. W. (1983). Statistical analysis of multiple fracture in 0°/90°/0° glass fiber/epoxy resin laminates. J. Mater Sci. 8: 352-362.
58. Masters, J. E., and Reifsnider, K. L. (1982). An investigation of cumulative damage development in quasi-isotropic graphite/epoxy laminates. In Damage in Composite Materials, ASTM STP 77. 40-62.
59. McCartney, L. N. (1992). Theory of stress transfer in a 0°-90°-0° cross-ply laminate containing a parallel array of transverse cracks. J. Mech. Phys. Solids. 40: 27-68.
60. McCartney, L. N. (2000). Model to predict effects of triaxial loading on ply cracking in general symmetric laminates. Comp. Sci. Techn. 60: 2255-2279.
61. McCartney, L. N., Schoeppner, G. A., and Becker, W. (2000). Comparison of models for transverse ply cracks in composite laminates. Comp. Sci. Techn. 60: 2347-2359.
62. Nairn, J. A. (1989). The strain energy release rate of composite microcracking: a variational approach. J. Comp. Materials. 23: 1106-1129.
63. Nairn, J. A., and Hu, S. (1992). The initiation and growth of delaminations induced by matrix microcracks in laminated composites. Int. J. Fract. 57: 1-24.
64. Nairn, J. A., and Hu, S. (1994). Micromechanics of damage: a case study of matrix cracking. In Talreja, R., ed.. Damage Mechanics of Composite Materials, Amsterdam: Elsevier. 187-243.
65. Nairn, J., Hu, S., and Bark, J. (1993). A critical evaluation of theories for predicting microcracking in composite laminates. J. Materials Science. 28: 5099-5111.
66. Needleman, A. (1988). Material rate dependence and mesh sensitivity in localization problems. Comput. Meth. Appl. Mech. Engrg. 67: 69-85.
67. Nuismer, R. J., and Tan, S. C. (1988). Constitutive relations of a cracked composite lamina. J. Comp. Materials. 22: 306-321.
68. Oden, J., Vemaganti, K., and Moes, N. (1999). Hierarchical modelling of heterogeneous solids. Comput. Meth. Appl. Mech. Engrg. 172: 2-25.
69. Ogin, S. L., Smith, P. A., and Beaumont, P. W. R. (1985). Matrix cracking and stiffness reduction during the fatigue of a (0/90)^ GFRP laminate. Comp. Sci. Techn. 22: 23-31.
70. Pagano, N., Schoeppner, G., Kim, R., and Abrams, F. (1998). Steady-state cracking and edge effect in thermo-mechanical transverse cracking of cross-ply laminates. Comp. Sci. Techn. 58: 1811-1825.
71. Parvizi, A., Garrett, K. W., and Bailey, J. E. (1978). Constrained cracking in glass fiber-reinforced epoxy cross-ply laminates. J. Mater. Sci. 13: 195-201.
72. Renard, J., and Jeggy, T. (1989). Modelisation de la fissuration transverse dans les materiaux composites carbone/resine. In Groupe de Reflexion sur I'Endommagement, Cetim, Senlis.
73. Schoeppner, G., and Pagano, N. (1998). Stress fields and energy release rates in cross-ply laminates. Int. J. Solids and Structures. 35(11): 1025-1055.
74. Selvarathimam, A., and Weitsman, J. (1999). A shear-lag analysis of transverse cracking and delamination in cross-ply carbon-fiber/epoxy composites under dry, saturated and immersed fatigue conditions. Comp. Sci. Techn. 59: 2\\5-2\23.
75. Slyuis, L. J., and De Borst, R. (1992). Wave propagation and localisation in a rate-dependent cracked medium: Model formulation and one dimensional examples. Int. J. Solids and Structures. 29: 2945-2958.
76. Takeda, N., and Ogihara, S. (1994). Initiation and growth of delamination from the tips of transverse cracks in CFRP cross-ply laminates. Comp. Sci. Techn. 52: 309-318.
77. Talreja, R. (1980). Stiffness based fatigue damage characterization of fibrous composites. In Bunsell, A. R., et al., eds.. Advances in Composite Materials, Oxford: Pergamon Press. 2: 1732-1739.
78. Talreja, R. (1985). Transverse cracking and stiffness reduction in composite laminates. J. Comp. Materials. 19:355-375.
79. Tong, J., Guild, F. J., Ogin, S. L., and Smith, P. A. (1997). On matrix crack growth in quasi-isotropic laminates, I. Experimental investigations. Comp. Sci. Techn. 57: 1527-1535.
80. Varna, J., and Berglund, L. A. (1992). A model for prediction of the transverse cracking strain in crosss-ply laminates. J. Reinf. Plast. Comp. 11: 708-728.
81. Wang, A. S. D., Chou, P. C, and Lei, S. (1984). A stochastic model for the growth of matrix cracks in composite laminates. J. Comp. Materials. 18: 239-254.
82. Wang, A. S. D., and Grossman, F. W. (1980). Initiation and growth of transverse cracks and edge delamination in composite laminates. Part 1: An energy method. J. Comp. Materials. 14: 71-87.
83. Yahvac, S., Yats, L., and Wetters, D. (1991). Transverse ply cracking in toughened and untoughened graphite/epoxy and graphite/polycyanate cross-ply laminates. J. Comp. Materials. 25: 1653-1667.
84. Yang, T., Liu, Y, and Wang, J. (2003). A study of the propagation of an embedded crack in a composite laminate of finite thickness. Composite Structures. 59: 473-479.
85. Zhang, J., Fan, J., and Soutis, C. (1992). Analysis of multiple matrix cracking in [± 0;„/90 „] composite laminates. Composites, 23: 291-298.
86. Zohdi, T. I., Oden, J. T., and Rodin, G. J. (1996). Hierarchical modeling of heterogeneous bodies. Comput. Meth. Appl. Mech. Engrg. 155: 181-192.