Characteristics of SOFC single cells with anode active layer via tape casting and co-firing

International Journal of Hydrogen Energy

Volumn 33, Issue 11, 2008, Pages 2826-2833

  Moon, Hwan ^a   Kim, Sun Dong ^a   Park, Eon Woo ^a   Hyun, Sang Hoon ^a   Kim, Ho Sung ^b  

^a Yonsei University   (South Korea)

^b Korea Institute of Industrial Technology   (South Korea)

Author keywords

Anode active layer; Anode functional layer; Anode supported electrolyte; Co firing; Solid oxide fuel cell; Tape casting

Indexed keywords

ANODES; MERCURY (METAL); MICROSTRUCTURE; POROSIMETERS;

ANODE ACTIVE LAYER; ANODE FUNCTIONAL LAYER; ANODE-SUPPORTED ELECTROLYTE; TAPE CASTING;

SOLID OXIDE FUEL CELLS (SOFC);

EID: 44449135550     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2008.03.024     Document Type: Article

References (24)

1. Zhu W.Z., and Deevi S.C. A review on the status of anode materials for solid oxide fuel cells. Mater Sci Eng A 362 (2003) 228-239
2. 2 electrolyte for the application of intermediate temperature SOFCs. Solid State Ionics 176 (2005) 33-39
3. Jung H.Y., Choi S.H., Kim H., Son J.W., Kim J., Lee H.W., et al. Fabrication and performance evaluation of 3-cell SOFC stack based on planar 10 cm×10 cm anode-supported cells. J Power Sources 159 (2006) 478-483
4. Kim S.D., Moon H., Hyun S.H., Moon J., Kim J., and Lee H.W. Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells. Solid State Ionics 177 (2006) 931-938
5. Chen K., Lu Z., Ai Na., Huang X., Zhang Y., Xin X., et al. Development of yttria-stabilized zirconia thin films via slurry spin coating for intermediate-to-low temperature solid oxide fuel cells. J Power Sources 160 1 (2006) 436-438
6. Kim S.D., Hyun S.H., Moon J., Kim J.H., and Song R.H. Fabrication and characterization of anode-supported electrolyte thin film for intermediate temperature solid oxide fuel cells. J Power Sources 139 (2005) 67-72
7. Vanherle J., Ihringer R., Cavieres R.V., Constantin L., and Bucheli O. Anode supported solid oxide fuel cells with screen-printed cathodes. J Eur Ceram Soc 21 (2001) 1855-1859
8. Montero X., Pauporte T., Ringuede A., Vannier R.N., and Cassir M. Properties of zirconia thin layers elaborated by high voltage anodisation in view of SOFC application. J Power Sources 151 (2005) 85-92
9. Leng Y.J., Chan S.H., Khor K.A., and Jiang S.P. Performance evaluation of anode-supported solid oxide fuel cells with thin film YSZ electrolyte. Int J Hydrogen Energy 29 (2004) 1025-1033
10. Ohrui H., Matushima T., and Hirai T. Performance of a solid oxide fuel cell fabricated by co-firing. J Power Sources 71 (1998) 185-189
11. Simwonis D., Thulen H., Dias F.J., Naoumidis A., and Stover D. Properties of Ni/YSZ porous cermets for SOFC anode substrates prepared by tape casting and coat-mix process. J Mater Process Technol 92-93 (1999) 107-111
12. Montinaro D., Sglavo V.M., Bertoldi M., Zandonella T., Arico A., Lo Faro M., et al. Tape casting fabrication and co-sintering of solid oxide "half cells" with a cathode-electrolyte porous interface. Solid State Ionics 177 (2006) 2093-2097
13. Muller A.C., Herbstritt D., and Ivers-Tiffee E. Development of a multilayer anode for solid oxide fuel cells. Solid State Ionics 152-153 (2002) 537-542
14. Mukherjee A., Maiti B., Das Sharma A., Basu R.N., and Maiti H.S. Correlation between slurry rheology, green density and sintered density of tape cast yttria stabilised zirconia. Ceram Int 27 (2001) 731-739
15. Savo G., Rainer A., D'Epifanio A., Licoccia S., and Traversa E. Co-sintering of dense YSZ electrolyte films on porous NiO-YSZ supporting anodes for IT-SOFCs. SOFC IX, PV 2005-07 (2005), The Electrochemical Society, Pennington, NJ p. 1031-6
16. Ye G., Ju F., Lin C., Gopalan S., Pal U., and Seccombe D.A. Low-cost single step co-firing technique for SOFC manufacturing. SOFC IX, PV 2005-07 (2005), The Electrochemical Society, Pennington, NJ p. 451-9
17. Moon H., Kim S.D., Hyun S.H., and Kim H.S. Fabrication of anode-supported SOFC single cells via tape-casting of thin tapes and co-firing. J Korean Ceram Soc 43 (2006) 751-760
18. Kim J.W., and Virkar A.V. The effect of anode thickness on the performance of anode-supported solid oxide fuel cells. SOFC VI, PV 99-19 (1999), The Electrochemical Society, Pennington, NJ p. 830-9
19. Williford R.E., Chick L.A., Maupin G.D., Simner S.P., and Stevenson J.W. Diffusion limitation in the porous anodes of SOFCs. J Electrochem Soc 150 (2003) A1067-A1072
20. Kim J.W., Virkar A.V., Fung K.Z., Mehta K., and Singhal S.C. Polarization effects in intermediate temperature, anode-supported solid oxide fuel cells. J Electrochem Soc 146 (1999) 69-78
21. Zhao F., and Virkar A.V. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters. J Power Sources 141 (2005) 79-95
22. Tanner C.W., Fung K.Z., and Virkar A.V. The effect of porous composite electrode structure on solid oxide fuel cell performance. J Electrochem Soc 144 (1997) 21-30
23. Jeon D.H., Nam J.H., and Kim C.J. Microstructural optimization of anode-supported solid oxide fuel cells by comprehensive microscale model. J Electrochem Soc 153 (2006) A406-A417
24. Moon H., Kim S.D., Hyun S.H., and Kim H.S. Development of IT-SOFC unit cells with anode-supported thin electrolyte via tape casting and co-firing. Int J Hydrogen Energy 33 (2008) 1758-1768