Finite element simulation of lubricated contact in rolling using the arbitrary Lagrangian-Eulerian formulation

Computer Methods in Applied Mechanics and Engineering

Volumn 193, Issue 39-41 SPEC. ISS., 2004, Pages 4323-4353

  Boman, R ^a   Ponthot, J P ^a  

^a UNIVERSITY OF LIÈGE   (Belgium)

Author keywords

ALE formulation; Finite elements; Large deformation; Lubrication; Rolling

Indexed keywords

ALGORITHMS; COMPUTATIONAL METHODS; COMPUTER SIMULATION; FINITE ELEMENT METHOD; GALERKIN METHODS; LUBRICATION; PROBLEM SOLVING;

FINITE ELEMENT SIMULATION; GAUSS POINTS; LAGRANGIAN EULERIAN COMPUTATION; SOLID MECHANICS;

ROLLING;

EULERIAN-LAGRANGIAN ALGORITHM;

EID: 4444269452     PISSN: 00457825     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cma.2004.01.034     Document Type: Article

References (90)

1. R. Akkerman, Euler-Lagrange simulations of non isothermal viscoelastic flows, PhD thesis, University of Twente, Enschede, The Netherlands, 1993
2. R. Akkerman, J. Huètink, P.N. van der Helm. Finite elements and volumes in a Euler Lagrange formulation--artificial dissipation versus limited flux schemes, in: E. Oñate, D.R.J. Owen, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1995, pp. 2307-2318
3. Al-Salehi F.A.R. Firbank T.C. Lancaster P.R. An experimental determination of the roll pressure distributions in cold rolling Int. J. Mech. Sci. 15 1973 693-710
4. Argyris J. Doltsinis J.-St. Fisher H. Wurstenberg H. TA π ANTA PEI Comput. Meth. Appl. Mech. Engrg. 51 1985 289-362
5. Baaijens F.P.T. An U-ALE formulation for 3-D unsteady viscoelastic flow Int. J. Numer. Meth. Engrg. 36 1993 1115-1143
6. Belytschko T. Flanagan D.P. Kennedy J.M. Finite element methods with user-controlled meshes for fluid-structure interaction Comput. Meth. Appl. Mech. Engrg. 33 1982 669-688
7. Belytschko T. Kennedy J.M. Computer models for subassembly simulation Nucl. Engrg. Des. 49 1 1978 17-38
8. Belytschko T. Kennedy J.M. Schoeberle D.F. Quasi-Eulerian finite element formulation for fluid-structure interaction J. Pressure Vessel Technol. 102 February 1980 62-69
9. Benson D.J. An efficient, accurate, simple ALE method for nonlinear finite element programs Comput. Meth. Appl. Mech. Engrg. 72 1989 305-350
10. Benson D.J. Computational methods in Lagrangian and Eulerian hydrocodes Comput. Meth. Appl. Mech. Engrg. 99 1992 235-394
11. Benson D.J. Momentum advection on a staggered mesh J. Comput. Phys. 100 1992 143-162
12. Bhushan B. Introduction to Tribology 2002 John Wiley and sons
13. R. Boman, Formalisme Eulérien Lagrangien pour le contact lubrifié entre solides (rapport d'activité FRIA--in French), Technical Report TF-55, Université de Liège, Belgium, 1998
14. Brooks A.N. Hughes T.J.R. Streamline upwind/Petrov-Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations Comput. Meth. Appl. Mech. Engrg. 32 1982 199-259
15. F. Casadei, J. Donea, A. Huerta, Arbitrary Lagrangian Eulerian finite elements in non-linear fast transient continuum mechanics, Technical Report EUR 16327 EN, University of Catalunya, Barcelona, Spain, 1995
16. Cescutti J.P. Wey E. Chenot J.L. Finite element calculation of hot forging with continuous remeshing Chenot J.L. Oñate E. Modelling of Metal Forming Processes, EUROMECH-233 1988 207-216 Sophia-Antipolis France
17. Chorin A. Hughes T.J.R. McCracken M.F. Marsden J.E. Product formulas and numerical algorithms Comm. Pure Appl. Math. 31 1978 205-256
18. C. Collette, C. Counhaye, J.P. Ponthot, Intégration du transfert de rugosité à un modèle de laminage à froid. Revue de Métallurgie-CIT, July-August 2000, pp. 961-969
19. Donéa J. Finite element analysis of transient dynamic fluid-structure interaction Donéa J. Advanced Structural Dynamics 1978 255-290 Advanced Science Publishers
20. Donéa J. Arbitrary Lagrangian-Eulerian finite element methods Belytschko T. Hughes T.J.R. Computational Methods for Transient Analysis 1983 474-516 North Holland chapter 10
21. Donéa J. Giuliani S. Halleux J.P. An Arbitrary Lagrangian-Eulerian FEM for transient dynamic fluid-structure interactions Comput. Meth. Appl. Mech. Engrg. 33 1982 689-723
22. Donéa J. Huerta A. Ponthot J.P. Rodriguez-Ferran A. Arbitrary Lagrangian Eulerian methods Stein E. de Borst R. Hughes T.J.R. Encyclopedia of Computational Mechanics 2004 John Wiley and sons
23. Eriksson L.E. Practical three-dimensional mesh generation using transfinite interpolation SIAM J. Sci. Stat. Comput. 6 3 1985 712-741
24. Frank R.M. Lazarus R.B. Mixed Eulerian-Lagrangian method Alder B.et al. Methods in Computational Physics vol. 3 1964 Academic Press New York
25. Gadala M.S. Movahhedy M.R. Wang J. On the mesh motion for ALE modeling of metal forming processes Finite Elem. Anal. Des. 38 2002 435-459
26. Gadala M.S. Wang J. ALE formulation and its application in solid mechanics Comput. Meth. Appl. Mech. Engrg. 167 1998 33-55
27. Gadala M.S. Wang J. Simulation of metal forming processes with finite element methods Int. J. Numer. Meth. Engrg. 44 1999 1397-1428
28. Ghosh S. Kikuchi N. An Arbitrary Lagrangian-Eulerian FEM for large deformation analysis for elastic-viscoplastic solids Comput. Meth. Appl. Mech. Engrg. 86 1991 127-188
29. Giuliani S. An algorithm for continuous rezoning of the hydrodynamic grid in arbitrary Lagrangian-Eulerian computer codes Nucl. Engrg. Des. 72 2 1982 205-212
30. Gordon W.J. Blending-function methods of bivariate and multivariate interpolation and approximation SIAM J. Numer. Anal. 8 1 1971 158-177
31. Gordon W.J. Hall C.H. Construction of curvilinear co-ordinate systems and applications to mesh generation Int. J. Numer. Meth. Engrg. 7 1973 461-477
32. Haber R. Abel J.F. Discrete transfinite mappings for the description and meshing of three-dimensional surfaces using interactive computer graphics Int. J. Numer. Meth. Engrg. 18 1982 41-66
33. Haber R. Shephard M.S. Abel J.F. Gallagher R.H. Greenberg D.P. A general two-dimensional, graphical finite element preprocessor utilizing discrete transfinite mappings Int. J. Numer. Meth. Engrg. 17 1981 1015-1044
34. Haber R.B. Hariandja B.H. Computational strategies for nonlinear and fracture mechanics problems. An Eulerian-Lagrangian finite element approach to large deformation frictional contact Comput. Struct. 20 1-3 1985 193-201
35. L.G. Hector, Lubricant film thickness measurements in axisymmetric stretch forming using optical interferometry, PhD thesis, Northwestern University, Evanston, Illinois, 1987
36. Hogge M. Ponthot J.P. Metal forming analysis via Eulerian-Lagrangian FEM with adaptive mesh Lat. Am. Res. 21 1991 217-224
37. T-C. Hsu, Friction modeling in computer simulation of sheet metal forming processes, PhD thesis, Northwestern University, Evanston, Illinois, 1991
38. Y.K. Hu, W.K. Liu. Simulation of ring rolling process by arbitrary Lagrangian Eulerian finite element method, vol. 20, chapter Computer modeling and simulation of manufacturing processes, ASME Winter Meeting, Dallas, Tx, 1990, pp. 225-240
39. Hu Y.-K. Liu W.K. The application of ale contact algorithms in bulk deformation processes Kulak Ronald F. Computational Aspect of Contact Impact and Penetration 1991 10-33 Aptek Inc.
40. Hu Y.-K. Liu W.K. An ALE hydrodynamic lubrication finite element method with application to strip rolling Int. J. Numer. Meth. Engrg. 36 1993 855-880
41. Huerta A. ALE stress update in transient plasticity problems Hinton E. Owen D.R.J. Onate E. Computational Plasticity. Fundamentals and Applications 1995 1865-1871 Pineridge Press
42. Huerta A. Casadei F. New ALE applications in nonlinear fast transient solid dynamics Engrg. Comput. 11 1994 317-345
43. A. Huerta, F. Casadei, J. Donéa, ALE stress update in transient plasticity problems, in: E. Oñate, D.R.J. Owen, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1995, pp. 1865-1876
44. Huétink J. van der Helm P.N. On Euler-Lagrange finite element formulation in forming and fluid problems Chenot J.L. Wood R.D. Zienkiewicz O. Numerical Methods in Industrial Forming Processes 1992 45-54 Sophia-Antipolis France
45. Huétink J. van der Lugt J. Progress in mixed Eulerian-Lagrangian finite element simulation of forming processes Int. J. Numer. Meth. Engrg. 30 1990 1441-1457
46. Hughes T.J.R. Numerical implementation of constitutive models: Rate-independent deviatoric plasticity Nemat-Nasser S. Asaro R.J. Hegemier G.A. Theoretical Foundation for Large-Scale Computations of Nonlinear Material Behavior 1983 M. Nijhoff
47. Hughes T.J.R Liu W.K. Zimmerman T.K. Lagrangian Eulerian finite element formulation for incompressible viscous flows Comput. Meth. Appl. Mech. Engrg. 29 1981 329-349
48. Hughes T.J.R. Mallet M. Mizukami A. A new finite element formulation for computational fluid dynamics: II: beyond SUPG Comput. Meth. Appl. Mech. Engrg. 54 1986 341-355
49. Kennedy J.M. Belytschko T. Theory and application of a finite element method for Arbitrary Lagrangian-Eulerian fluids and structures Nucl. Engrg. Des. 68 1981 129-146
50. Koh H.M. Haber R.B. Elastodynamic formulation of the Eulerian-Lagrangian kinematic description J. Appl. Mech. 53 1986 839-845
51. Koh H.M. Lee H.S. Haber R.B. Dynamic crack propagation analysis using Eulerian-Lagrangian kinematic descriptions Comput. Mech. 3 1988 141-155
52. Laursen T.A. Computational Contact and Impact Mechanics 2002 Springer
53. Liu W.K. Hu Y.K. ALE hydrodynamic lubrication finite element method for strip rolling Chenot J.L. Wood R.D. Zienkiewicz O.C. Numerical Methods in Industrial Forming Processes 1992 731-736 Valbonne France
54. Liu W.K. Finite element procedures for fluid-structure interactions and application to liquid storage tanks Nucl. Engrg. Des. 65 1981 221-238
55. Liu W.K. Belytschko T. Chang H. An arbitrary Lagrangian-Eulerian finite element method for path dependent materials Comput. Meth. Appl. Mech. Engrg. 58 1986 227-245
56. Liu W.K. Chang H. Chen J.S. Belytschko T. Arbitrary Lagrangian Eulerian Petrov-Galerkin finite element for nonlinear continua Comput. Meth. Appl. Mech. Engrg. 68 1988 259-310
57. Liu W.K. Chen J.S. Belytschko T. Zhang Y.F. Adaptive ALE finite elements with particular reference to external work rate on frictional interface Comput. Meth. Appl. Mech. Engrg. 93 1991 189-216
58. Liu W.K. Ma D.C. Computer implementation aspects for fluid-structure interactions problems Comput. Meth. Appl. Mech. Engrg. 31 1982 129-148
59. N. Marsault, Modélisation du régime de lubrification mixte en laminage á froid (in French), PhD thesis, Ecole nationale supérieure des mines de Paris, France, 1998
60. Marsault N. Montmitonnet P. Deneuville P. Gratacos P. A model of mixed lubrication for cold rolling of strip Huétink J. Baaijens F.P.T. Simulation of Materials Processing: Theory, Methods and Applications 1998 Rotterdam The Netherlands
61. Martinet F. Chabrand P. Application of ALE finite element method to a lubricated friction model in sheet metal forming Int. J. Solids Struct. 37 29 2000 4005-4031
62. Montmitonnet P. Plasto-hydrodynamic lubrication (PHD)-application of lubrication theory to metal forming processes C.R. Acad. Sci. Paris, t.2, Series IV 2001 729-737
63. Noh W.F. CEL: a time-dependent two-space-dimensional, coupled Eulerian-Lagrangian code Alder B.et al. Meth. Comput. Phys., Fundam. Meth. Hydrodyn. vol. 3 1964 117-179 Academic Press New York
64. Nomura T. ALE finite element computations of fluid-structure interaction problems Comput. Meth. Appl. Mech. Engrg. 112 1994 291-308
65. Nomura T. Hughes T.J.R. An arbitrary Lagrangian-Eulerian finite element method for interaction of fluid and a rigid body Comput. Meth. Appl. Mech. Engrg. 95 1992 115-138
66. Patir N. Cheng H.S. An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication J. Lubr. Technol. 100 1978 12-17
67. J.-P. Ponthot, Traitement unifié de la Mécanique des Milieux Continus solides en grandes transformations par la méthode des éléments finis (in French), PhD thesis, Université de Liége, Liége, Belgium, 1995
68. Ponthot J.P. A method to reduce cost of mesh deformation in Eulerian-Lagrangian formulation Chenot J.L. Oñate E. Modelling of Metal Forming Processes, EUROMECH-233 1988 65-74 Sophia-Antipolis France
69. Ponthot J.P. Efficient mesh management in Eulerian-Lagrangian method for large deformations analysis Thomson E.G. Wood R.D. Zienkiewicz A. Samuelsson O. Numerical Methods in Industrial Forming Processes--NUMIFORM 1989 1989 203-210 Fort Collins Colorado
70. J.P. Ponthot, The use of the Eulerian-Lagrangian fern with adaptive mesh, applications to metal forming simulation, in: D.R.J. Owen, E. Oñate, (Eds.), International Conference on Computational Plasticity, Barcelona, Spain, 1992, pp. 2269-2281
71. Ponthot J.P. The use of the Eulerian-Lagrangian formulation including contact, applications to forming simulation via fem Chenot J.L. Wood R.D. Zienkiewicz O. Numerical Methods in Industrial Forming Processes 1992 293-300 Sophia-Antipolis France
72. Ponthot J.P. Unified stress update algorithms for the numerical simulation of large deformation elasto-plastic and elasto-viscoplastic processes Int. J. Plast. 18 1 2002 91-126
73. Ponthot J.P. Belytschko T. Arbitrary Lagrangian-Eulerian formulation for element-free Galerkin method Comput. Meth. Appl. Mech. Engrg. 152 1998 19-46
74. J.P. Ponthot, M. Hogge, The use of the Eulerian-Lagrangian FEM in metal forming applications including contact and adaptive mesh, in: Chandra, J.N. Reddy, (Eds.), Advances in Finite Deformation Problems in Material Processing, Atlanta. Ga., December 1991, ASME Winter Annual Meeting ASME AMD-125, pp. 44-64
75. G. Rekers, Numerical simulation of unsteady viscoelastic flow of polymers, PhD thesis, University of Twente, The Netherlands, 1995
76. Reynolds O. On the theory of lubrication and its application to Mr. Beauchamp tower's experiments, including an experimental determination of the viscosity of olive oil Philos. Trans. R. Soc. Land. 177 1886 157-234
77. Rodriguez-Ferran A. Casadei F. Huerta A. ALE stress update for transient and quasistatic processes Int. J. Numer. Meth. Engrg. 43 1998 241-262
78. Schreurs P.J.G. Veldpaus F.E. Brekelmans W.A.M. Simulation of forming processes using the Arbitrary Eulerian-Lagrangian formulation Comput. Meth. Appl. Mech. Engrg. 58 1986 19-36
79. Sheu S. Wilson W.R.D. Mixed lubrication of strip rolling Tribol. Trans. 37 3 1994 483-493
80. Simo J.C. Hughes T.J.R. General return mapping algorithms for rate-independent plasticity Desai C.S. Krenipl E. Constitutive Laws for Engineering Materials: Theory and Applications 1987 Elsevier Amsterdam
81. H.S. Stoker, Developments of the arbitrary Lagrangian Eulerian method in non linear solid mechanics, PhD thesis, University of Twente, The Netherlands, 1999
82. Sutcliffe M.P.F. Surface asperity deformation in metal forming processes Int. J. Mech. Sci. 30 1988 847-868
83. Tripp J.H. Surface roughness effects in hydrodynamic lubrication: The flow factor method J. Lubr. Technol. 105 1983 458-465
84. Wilson W.R.D. Friction and lubrication in sheet metal forming Koistinen D.P. Wang N.M. Mechanics of Sheet Metal Forming 1978 157-177 Plenum Press
85. Wilson W.R.D. Friction and lubrication in bulk metal forming processes J. Appl. Metal Work. 1 1979 7-19
86. Wilson W.R.D. Marsault N. Partial hydrodynamic lubrication with large fractional contact areas ASME--J. Tribol. 120 1998 1-5
87. Wilson W.R.D. Sheu S. Real area of contact and boundary friction in metal forming Int J. Mech. Sci. 30 1988 475-489
88. Wilson W.R.D. Walowit J.A. An isothermal hydrodynamic lubrication theory for strip rolling with front and back tensions Tribol. Convent. 1971 169-172
89. H. Wisselink, Analysis of Guillotining and Slitting, finite element simulations, PhD thesis, University of Twente, Enschede, The Netherlands, 2000
90. Yamada T. Kikuchi F. An Arbitrary Lagrangian-Eulerian finite element method for incompressible hyperelasticity Comput. Meth. Appl. Mech. Engrg. 102 1993 149-177