Progress in high strength steels with low temperature toughness for welded structures

Yosetsu Gakkai Shi/Journal of the Japan Welding Society

Volumn 65, Issue 3, 1996, Pages 26-43

  Shiga, Chiaki ^a  

^a JFE STEEL CORPORATION   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 4444253808     PISSN: 00214787     EISSN: None     Source Type: Journal    
DOI: 10.2207/qjjws1943.65.3_210     Document Type: Article

References (108)

1. C. Shiga: Application of TMCP to high strength steels with excellent weld properties, Proc. of Pre-Assembly Symposium of 47th Annual Assembly of IIW, (1994) pp. 207-212 and UW Document IX-1746-94
2. C. Shiga: Benefits of TMCP and its applications to HSLA steels, Proc. of the symposium on METALLOGRAPHY '95 (1995) pp. 195-200
3. C. Shiga, K. Amano, T. Enami, M. Tanaka and R. Tarui: Applications of multipurpose accelerated cooling system (MACS) to the production of HSLA steel plate, Proc. Int. Conf. on Technology and Applicaiton of HSLA Steels, (1984) pp. 643-654
4. C. Shiga, K. Amano, T. Hatomura, K. Hirose, Y. Saito and T. Choji: Ferrite-fine bainite steel line pipe of X70 and X80 grades for low temperature service, Proc. Int. Conf. on Steels for Line Pipe and Pipeline Fittings (1983) pp. 127-135
5. T. Tanaka, N. Tabata, T. Hatomura, C. Shiga: Three stage of controlled rolling, Proc Int Symp on High Strength Low Alloy Steels (1977) pp. 107-119
6. C. Shiga, H. Otsubo, A. Kamada, N. Ohashi, K. Hirose, H. Mottate: High toughness line pipe for arctic use, Proc. Int. Conf. on Pipeline and Energy Plant Piping: Design and Technolgy, (1980) pp. 31-42
7. Y. Saito, N. Koshizuka, C. Shiga, T. Sekine and T. Yoshizato: Advanced controlled rolling techniques for manufacture of high strength, high toughness steel plates at 5,500 mm plate mill, Proc. Int. Conf. on Steel Rolling 1980, Vol. 2 (1980) pp. 1063-1074
8. K. Amano, T. Hatomura, M. Koda, C. Shiga and T. Tanaka: Moderation of controlled rolling by accelerated cooling, Accelerated Cooling Steel, (1986) pp. 349-365
9. K. Amano, T. Hatomura, C. Shiga and T. Enami: Effects of accelerated cooling on ferrite nucleation rate and second phase transformation behavior from deformed austenite, Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, 1988, Vol. 1 (1988) pp. 368-374
10. Y. Saito, C. Shiga and T. Enami: Computer simulation of carbonitride precipitation in high strength low alloy (HSLA) steel, Proc. Int. Conf. on Physical Metallurgy of Thermomechanical Prosessing of Steels and Other Metals 1988, Vol. 2 (1988) pp. 753-760
11. K. Amano, T. Hatomura, C. Shiga, T. Enami and T. Tanaka: Effect of accelerated cooling condition on ferritic and subsequent second phase transformation from deformed austenite, Proc. Int. Symp. on Accelerated Cooling of Rolling Steel 1987, (1988) pp. 43-56
12. Y. Saito and C. Shiga: Computer simulation of microstructural evolution in thermomechanical processing of steel plates, ISIJ Int, Vol. 32, No. 3 (1992) pp. 414-422
13. C. Shiga and Y. Saito: Toughness improvement in HAZ of HSLA steels by TMCP in Japan, Proc First Japan-United States Symposium on Advances in Weld Metallurgy (1990) pp. 295-325
14. Y. Kasamatsu, S. Takashima and T. Hosaya: Influence of Martensktf-Austenite constituent on toughness of heat affected zone, Tetsu to Hagane, 65 (1978) pp. 1222-1231
15. S. Kanazawa, A. Nakashima, K. Okamoto and K. Kanaya: Improved toughness of welded fusion Zone by fine TiN particles and development of a steel for a large heat input welding, Tetsu to Hagane, 61 (1975) pp. 2589 -2603
16. S. Takashima: Steels for high heat input welding, Symposium on application of steels produced by new manufacturing process (TMCP steels) to welded structure, Society of Naval Architects of Japan (1983) pp. 93-115
17. C. Shiga, Y. Nakano, K. Amano and H. Yajima: Extensive use of high strength steel plates produced by TMCP in construction of ships and offshore structure, Proc. Microalloying '88, (1988) pp. 225-233
18. I. Watanabe, M. Suzuki, H. Tagawa, Y. Kunisada, Y. Yamazaki and N. Iwasaki: Welded-HAZs toughness and line heated properties of TMCP steels, Nippon Kokan Giho, 112 (1986) pp. 63-68
19. S. Sekino: Toughness of welded bond and heat affected zone of welded joint in steel plate, 36th and 37th Nishiyama Memorial Lectures, ISSJ (1975) pp. 151-178
20. T. Kubo, Y. Nakano, C. Shiga: Application of crack tip opening displacement to fracture assessment of welded joint, 5th Internl. Symposium of Japan Welding Society on Advanced Technology in Welding, Materials Processing and Evaluation, JWS (1990)
21. S. Machida, T. Miyata, M. Toyosada and Y. Hagiwara: Study on CTOD test method of weldments, ASTM Symposium on Fatigue and Fracture Testing of Weldments. (1988), ASTM
22. T. Haze, S. Aihara, Y. Hagiwara, K. Uchino, Y. Kawashima, S. Tomita and R. Chijiiwa: A study on fracture controlling critical COD values of welded joint of high tensile strength steels, Journal of the Society of Naval Architects of Japan 162 (1987) pp. 424-431
23. T. Haze, S. Aihara, Y. Ohno, K. Uchino, Y. Kawashima, Y. Tomita, R. Chijiiwa and H. Mimura: Steel plate with superior HAZ toughness for offshore structure, Seitetsu Kenkyu, 326 (1987): 36-44
24. 24. K. Amano, T. Kubo, N. Itakura and Y. Nakano: Metallurgical and welding factors controlling local brittle zone in weld HAZ, Proc. Internl. Conf. on Offshore Mechanics and Arctic Engineering (1989) pp. 683-689
25. M. Nakanishi, Y. Komizo and I. Seta: Improvement of welded HAZ toughness by dispersion with nitride particles and oxide particles, Journal of the Japan Welding Society 52 (1983) pp. 117-124
26. M. Koda, K. Amano, Y. Nakano, C. Shiga and E. Kobayashi: Development of 420 MPa yield strength steel plates for arctic offshore structures. Proc. Internl Conf. on Offshore Mechanics and Arctic Engineering, ASTM (1987) pp. 45-52
27. M. Koda, K. Amano, Y. Funahashi, C. Shiga and S. Ueda: Relation between dissolution behavior of titanium- nitride precipitates and austenite grain size in synthetic HAZ, Trans. ISIJ 25 (1984) B21
28. T. Funakoshi, T. Tanaka, S. Ueda, M. Ishikawa, N. Koshizuka and K. Kobayashi: Improvement in microstructure and toughness of large heat input weld bond due to addition of rare earth metals and boron in high strength steel, Testu to Hagane, 63 (1977) pp. 303-312
29. K. Hattori, A. Yanaka, K. Okamoto, Y. Tomita, Y. Tsuda, R. Yamaba, T. Haze and K. Ito: Steel plates for ships and offshore structures in ice covered waters, Seitetsu Kenkyu, 314, (1984) pp. 19-26
30. Y. Ohno, Y. Okamura, S. Matsuda, K. Yamamoto and T. Mukai: Characteristics of HAZ microstructure in Ti-B treated steel for large heat input welding, Tetsu to Hagane, 73 (1987) pp. 1010-1017
31. H. Homma, S. Okita, S. Matsuda and K. Yamamoto: Improvement of HAZ toughness in HSLA steel by introducing finely dispersed Ti-oxide, Welding Journal 66 (1987) pp. 301-309
32. C. Shiga: Effect of steelmaking, alloying and rolling variables on the HAZ structure and properties in microalloyed plate and line pipe, Proc. Int. Conf. on the Metallurgy, Welding and Qualification of Microalloyed Steel Weldments, (1990)
33. O. Furukimi, A. Narumoto, C. Shiga, T. Tanaka and Y. Nakano: Toughness of welded joint and crack arrestability of base plate in ultra low C-2.5% Ni steel plate, Trans ISIJ, Vol. 27, No. 6 (1987) pp. 460-466
34. K. Komai, K. Minoshima, S. Kinoshita, G. Kim: Corrosion fatigue crack initiation of high-tensile-strength steels in synthetic seawater, JSME Int. J Ser. 1 (Jpn. Soc. Mech. Eng.), Vol. 31, No. 3 (1988) pp. 606-612
35. S. Matsumoto, Y. Nakano and C. Shiga: Improvement of corrosion fatigue strength of cruciform fillet welded joints of steel plates for offshore structures, Proc. Int. Conf on Evaluation of Materials Performance in Severe Environment, Vol. 1 (1989) pp. 159-166
36. Y. Nakano, S. Matsumoto, O. Watanabe, T. Hatomura: Corrosion fatigue crack propagation behavior of TMCP steels, Proc. 12th, Int. Conf. Offshore Mech. Arct. Eng., Vol. 5 (1993) pp. 215-223
37. J. Katsuta, M. Toyosada, H. Yajima: Analysis of brittle crack propagation in TMCP steel rolled at temperature in austenite ferrite region, Nav. Architecture Ocean Eng., Vol. 29 (1991) pp. 163-173
38. Y. Komizo: Crack susceptibility of steel plates produced by the thermomechanical control process, Weld Res. Abroad, Vol. 33, No. 8/9 (1987) pp. 12-18
39. T. Kasuya, N. Yurioka: Weldability of TMCP steel in underwater welding, Int. Offshore Mech. Arct. Eng. Symp., Vol. 3 (1987) pp. 145-150
40. T. Kubo, Y. Nakano and C. Shiga: Application of crack tip opening displacement to fracture assessment of weld-ed joint, Proc. Inter. Sympo. on "Advanced Technology of Weld Material and Process", Vol. 2 (1990) pp. 835-840
41. Trans Jpn Weld Soc., Vol. 18, No. 1 (1987) pp. 69-76
42. M. L. Peterson: TMCP steels for offshore structures, Proc. 19th, Annu. Offshore Technol Conf Vol. 4, No. 4, (1987) pp. 21-28
43. K. Masubuchi, K. Katoh: Uses of thermo-mechanical control process (TMCP) steels for ships and offshore structures and welding considerations, Proc. 6th, Int. Offshore Mech. Arct. Eng. Symp., Vol. 3 (1987), pp. 137-144
44. R. M. Denys, A. Dhooge: Mechanical tensile properties of weld simulated HAZ microstuctures in normalized, quenched-tempered and TMCP low carbon mangnese steels, Proc. 7th Int. Conf. Offshore Mech. Arct. Eng. 1988, Vol. 3 (1988), pp. 207-218
45. S. Y. Yoo, S. P. Sub, S. K. Kirn, H. S. Shin: High heat input (150 kj/cm) tandemsubmerged arc welding of a TMCP steel (EH34S) used for the construction of the world's largest offshore barge, Proc. 7th Int, Conf. Off-shore Mech. Arct. Eng., Vol. 3 (1988) pp. 37-43
46. R. Denys: The effect of HAZ softening on the fracture characteristics to modern steel weldments and the practi-cal integrity of marine structures made by TMCP steels, Proc. EVALMAT 89, Vol. 2 (1989) pp. 1013-1027
47. M. Manicrasso, M. Pontremoli, L. Rizzi: TMCP steel plates for offshore structures weldability evaluation, Proc. 10th, Int. Conf. Offshore Mech. Arct. Eng., Vol. 3 A (1991) pp. 117-124
48. C. Shiga, K. Amano, T. Tanaka: Newly developed off-shore structural steel plate using accelerated cooling process, Proc. Japan-Canada Seminar on Secondary Steelmaking, (1985) pp. 140-155
49. K. Amano, C. Shiga, Y. Hirai, N. Kamoi, H. Matsumura, S. Muramatsu, J. Tabata and M. Toyosada: New high strength steel plate for ice-breaking ships designed to operate in low ambient temperatures, Proc. 5th Int. OMAE, Vol. 2 (1986) pp. 338-345
50. M. Koda, K. Amano, Y. Nakano, C. Shiga, K. Tsubota, T. Kohno, Y. Kumakura and S. Kaihara: Development of 420MPa yeild strength steel plate for arctic offshore structures, Proc. 6th Int. OMAE, Vol. 3 (1987) pp. 45-52
51. S. Kaihara, T. Kohno and C. Shiga: Proposal on toughness value necessary for high-strength heavy thickness steel plate for the arctic use, Proc. EVALMAT 89, Vol. 2 (1989) pp. 717-724
52. E. Sugie, S. Yoshimura, C. Shiga, Y. Nakano and K. Amano: Study on fracture characteristics of high grade line pipe manufactured by TMCP, Proc. 3rd Int. Conf. on Steel and Rolling 1985, (1985) pp. 552-559
53. 2 corrosion resistance, Proc. "Pipeline Technology Conference", (1990) pp. 18. 19-18. 26
54. T. Hashimoto, Y. Komizo, M. Tsukamot, Y. Shirakawa, A. Yamasha, T. Ogawa: Recent development of large diameter line pipe of grade X-80 and X-100, Proc. 7th Int. Conf. Offshore Mech. Arct. Eng., Vol. 5 (1988) pp. 179-185
55. A. Streisselberger, J. Bauer: TMCP-Application for production of high strength, high toughness line pipe steels, Proc. Int. 10th, Conf. Offshore Mech. Arct. Eng., Vol. 5 (1991) pp. 43-49
56. P. Nevasmaa, M. Cederberg, M. Vilpas: Weldability of accelerated cooled (AcC) high strength TMCP steel X80, PB Rep., (1992) pp. 42
57. 2 Class TMCP Steels, Weld Res. Cone. Bull, No. 371 (1992) pp. 35
58. H. Yajima, M. Tada, D. Sakai, M. Katakami, T. Haze, T. Ishikawa: Development od new-type TMCP low-temperature-use steel and its application for LPG tankers, Proc. 10th, Eng., Vol. 3 A (1991) pp. 205-211
59. H. Tamehiro, Y. Ogata, T. Yoshino, K. Katayama, J. M. Gray, H. Ogawa, Y. Horii, R. Uenori, H. Kashimura: CRA clad UOE pipe produced by applying TMCP plate, Proc. 12th Int. Conf. Offshore Mech. Arct. Eng., Vol. 5 (1993) pp. 319-327