Onset and growth of adhesion failure and delamination induced damages in double lap joint of laminated FRP composites

Composite Structures

Volumn 85, Issue 4, 2008, Pages 326-336

  Panigrahi, S K ^a   Pradhan, B ^b  

^a NORTH EASTERN REGIONAL INSTITUTE OF SCIENCE AND TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Adhesion failure; Delamination; DLJ; LEFM; MCCI; SERR

Indexed keywords

ADHESION; DELAMINATION; ENERGY RELEASE RATE; FINITE ELEMENT METHOD; FRACTURE MECHANICS; LAMINATED COMPOSITES; SHEAR STRESS; STRAIN ENERGY;

ADHESION FAILURE; DOUBLE LAP JOINTS; LINEAR ELASTIC FRACTURE MECHANICS; MODIFIED CRACK CLOSURE INTEGRAL TECHNIQUE; STRAIN ENERGY RELEASE RATES;

FIBER REINFORCED PLASTICS;

ADHESION; DAMAGE; DELAMINATION; FAILURE ANALYSIS; FIBER REINFORCED COMPOSITE; FINITE ELEMENT ANALYSIS; FRACTURE; LAMINATE; SHEAR PROPERTY; STRESS;

EID: 44349188588     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2007.10.036     Document Type: Article

References (36)

1. Kelly G. Quasi-static strength and failure life of hybrid (bonded/bolted) composite single-lap joints. Compos Struct 72 (2006) 119-129
2. Potter K.D., Guild F.J., Harvey H.J., Wisnom M.R., and Adams R.D. Understanding and control of adhesive crack propagation in bonded joints between carbon fiber composite adherends I. Experimental. Int J Adhes Adhes 21 (2001) 435-443
3. Adams R.D., and Wake W.C. Structural adhesive joints in engineering (1984), Elsevier Applied Science Publishers
4. Tong L., and Steven G.P. Analysis and design of structural bonded joints (1999), Kluwer Academic Publishers
5. Pickett A.K., and Hollaway L. The analysis of elastic adhesive stresses in bonded lap joints in FRP structures. Compos Struct 3 (1985) 55-79
6. Kairouz K.C., and Matthews F.L. Strength and failure modes of bonded single lap joints between cross-ply adherends. Composites 24 (1993) 475-484
7. Duttaguru B., Everett Jr. R.A., Whitcomb J.D., and Johnson W.S. Geometrically non linear analysis of adhesively bonded joints. ASME Trans, J Eng Mater Technol 106 (1984) 59-65
8. Her S.H. Stress analysis of adhesively-bonded lap joints. Compos Struct 47 (1999) 673-678
9. Altus E. Three-dimensional singularities in double lap joints. Eng Frac Mech 21 (1985) 1098-1112
10. Adams R.D., and Peppiatt N.A. Stress analysis of adhesively bonded lap joints. J Strain Anal 9 (1974) 185-196
11. Pindera J.T., and Wang G. Criticality of local three-dimensional stresses in a symmetric adhesively bonded joint. Theor Appl Frac Mech 13 (1990) 1-9
12. Tsai M.Y., and Morton J. Three dimensional deformations in a ingle lap joint. J Strain Anal 29 (1994) 137-145
13. Panigrahi S.K., and Pradhan B. Three dimensional failure analysis and damage propagation behaviour of adhesively bonded single lap joints in laminated FRP composites. J Reinf Plast Compos 26 (2007) 183-201
14. Wang C.H., and Rose L.R.F. Determination of tri-axial stresses in bonded joints. Int J Adhes Adhes 17 (1997) 17-25
15. Pandey P.C., and Narasimhan S. Three dimensional nonlinear analysis of adhesively bonded lap joints considering viscoplasticity in adhesives. Compos Struct 79 (2001) 769-783
16. Kayupuv M., and Dzenis Y.A. Stress concentrations caused by bond cracks in single-lap adhesive composite joints. Compos Struct 54 (2001) 215-220
17. Da Silva L.F.M., and Adams R.D. Joint strength predictions for adhesive joints to be used over a wide temperature range. Int J Adhes Adhes 27 (2007) 362-379
18. Harris J.A., and Adams R.D. Strength prediction of bonded single lap joints by non-linear finite element methods. Int J Adhes Adhes 4 (1984) 65-78
19. Tong L., Sheppard A., and Kelly D. A numerical study of adhesively bonded composite panel-flange joints. Compos Struct 28 (1994) 449-458
20. Krueger R., Paris I.L., O'Brien T.K., and Minguet P.J. Comparison of 2D finite element modelling assumptions with results from 3D analysis for composite skin-stiffener debonding. Compos Struct 57 (2002) 161-168
21. Panigrahi S.K., and Pradhan B. Adhesion failure propagation in adhesively bonded single lap laminated FRP composite joints. J Adhes Sci Technol 21 (2007) 379-398
22. Carpenter W.C. A comparison of numerous lap joint theories for adhesively bonded joints. J Adhes 35 (1991) 55-73
23. Volkersen O. Die niektraftverteiling in zugbeanspruchten mit konstanten laschenquerscritten. Luftfahrtforschung 15 (1938) 41-47
24. Goland M., and Reissner E. The stresses in cemented joints. ASME Trans J Appl Mech 7 (1944) A17-A27
25. Hart-Smith LJ. Adhesive-bonded double lap joints. NASA-Langley Contract Report 1973, NASA-CR-112235.
26. Tsai S.W., and Wu E.M. A general theory of strength for anisotropic materials. J Compos Mater 5 (1971) 58-80
27. Tserpes K.I., Labeas G., Papanikos P., and Kermanidis Th. Strength prediction of bolted joints in graphite/epoxy composite laminates. Compos-Part B: Eng 33 (2002) 521-529
28. Tay T.E. Characterization and analysis of delamination fracture in composites: an overview of developments from 1990 to 2001. ASME Trans Appl Mech Rev 56 (2003) 1-32
29. Panda S.K., and Pradhan B. Mixed-mode analysis of superimposed thermo-elastic effects in fiber-reinforced composites with embedded interface delaminations. Compos Struct 77 (2007) 570-580
30. Pradhan B., and Panda S.K. Effect of material anisotropy and curing stresses on interface delamination propagation characteristics in multiply laminated FRP composites. ASME Trans J Eng Mater Technol 128 (2006) 383-392
31. Krueger R., and Minguet P.J. Analysis of composite skin-stiffener debond specimens using a shell/3D modeling technique. Compos Struct 81 (2007) 41-49
32. Sun C.T., and Manoharan M.G. Strain energy release rates of an interfacial crack between two orthotropic solids. J Compos Mater 23 (1989) 460-478
33. Irwin G.R. Analysis of stresses and strain near the end of a crack traversing a plate. ASME Trans J Appl Mech 24 (1957) 361-364
34. Keer L.M., and Chantaramungkorn K. Stress analysis for a double lap joint. ASME Trans J Appl Mech (1975) 353-357
35. Raju I.S., Shivakumar K.N., and Crews J.H. Three dimensional elastic analysis of a composite double cantilever beam specimens. AIAA J 26 (1988) 1493-1498
36. Tong L. Strength of adhesively bonded composite single lap joints with embedded cracks. AIAA J 36 (1998) 448-456