An investigation into active piezoelectric nanocomposites for distributed energy harvesting

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 6928, Issue , 2008, Pages

  Liu, Yingtao ^a   Sodano, Henry A ^a  

^a Arizona State University   (United States)

Author keywords

0 3 composite; Nanocomposites; Piezoelectric

Indexed keywords

POLYVINYLIDENE FLORIDE (PVDF); POWER HARVESTING;

ELECTROMECHANICAL COUPLING; ENERGY STORAGE; PIEZOELECTRIC DEVICES; POLYMER MATRIX;

NANOCOMPOSITES;

EID: 44349132847     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.776528     Document Type: Conference Paper

References (38)

1. Anton, S.R. and Sodano, H.A., 2007, "A Review of Power Harvesting Using Piezoelectric Materials (2003-2006)," Smart Materials and Structures, Vol. 16, pp. R1-R21.
2. Bent, A.A. and Hagood, N.W., and Rodgers, J.P., 1993a, "Anisotropic Actuation with Piezoelectric Fiber Composites," Presented at the fourth International Conference on Adaptive Structures, November 2-4th, Cologne, Federal Republic of Germany.
3. Bent, A.A. and Hagood, N.W., 1993b "Development of Piezoelectric Fiber Composites for Structural Actuation," Proceeding of the 34th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, April, La Jolla, CA, AIAA Paper No. 93-1717-CP pp. 3625-3638.
4. Bent, A.A., Hagood, N.W. and Rodgers, J.P., 1995, "Anisotropic Actuation with Piezoelectric Fiber Composites," Journal of Intelligent material systems and structures, Vol. 6, No. 3, pp. 338-349.
5. Churchill D L, Hamel M J, Townsend C P and Arms S W 2003 Strain energy harvesting for wireless sensor networks Proc. of SPIE's Smart Structures and Materials Conf. 5055 319-27
6. Egusa, S and Iwasawa, N., 1993a, "Poling characteristics of PZT/epoxy piezoelectric paints," Ferroelectrics, v 145, n 1-4, pp. 45-60.
7. Egusa, S and Iwasawa, N, 1993b, "Piezoelectric paints: preparation and application as built-in vibration sensors of structural materials," Journal of Materials Science, Vol. 28, no. 6, pp. 1667-1672.
8. Egusa, S and Iwasawa, N, 1994, "Preparation of Piezoelectric Paints and Application as Vibration Modal Sensors," Journal of Intelligent Material Systems and Structures, Vol. 140, No. 5, pp. 140-144.
9. Egusa, S and Iwasawa, N, 1995, "Thickness dependence of the poling and current-voltage characteristics of paint films made up of lead zirconate titanate ceramic powder and epoxy resin," Journal of Applied Physics, Vol. 78, No. 10, pp. 6060-6070.
10. Egusa, S and Iwasawa, N, 1998, "Piezoelectric paints as one approach to smart structural materials with health-monitoring capabilities," Smart Materials and Structures, Vol. 7, pp. 438-445.
11. Elvin, N.G. and Elvin, A.A., and Spector, M., 2001, "A Self-Powered Mechanical Strain Energy Sensor," Smart Materials and Structures, Vol. 10, pp. 293-299.
12. Elvin N, Elvin A and Choi D H 2003 A self-powered damage detection sensor Journal of Strain Analysis for Engineering Design 38 115-24.
13. Feenstra, J. and Sodano, H.A., 2008, "Enhanced Active Piezoelectric 0-3 Nanocomposites Fabricated through Electrospun Nanowires," Journal of Applied Physics, In Review.
14. Glynne-Jones P, Tudor M J, Beeby S P and White N M 2004 An electromagnetic, vibration-powered generator for intelligent sensor systems Sensors and Actuators, A: Physical 110 344-49
15. Granstrom, J., Feenstra, J., Sodano, H.A. and Farinholt, K., 2007, Energy Harvesting from a Backpack Instrumented with Piezoelectric Shoulder Straps, Smart Materials and Structures, Vol. 16, No. 5, pp. 1810-1820.
16. Hanner, K A, Safari, A, Newnham, R E and Runt, J, 1989. "Thin Film 0-3 Polymer/Piezoelectric Ceramic Composites: Piezoelectric Paints," Ferroelectrics, Vol. 100, pp. 255-260.
17. Hale, J M and Tuck, J, 1999, "A Novel Thick-film Strain Transducer using Piezoelectric Paint," Proceedings of the Institution of Mechanical Engineers, Part C, Vol. 213, pp. 613-622.
18. Hausler, E. and Stein, E., 1984, "Implantable Physiological Power Supply with PVDF Film," Ferroelectrics, Vol. 60, pp. 277-282.
19. thIEEE International Symposium on Applications of Ferroelectrics, Bethlehem, PA, USA, pp. 285-287.
20. Kornbluh R D, Pelrine R, Pei Q, Heydt R, Stanford S, Oh S and Eckerle J 2002 Electroelastomers: applications of dielectric elastomer transducers for actuation, generation, and smart structures Proc. of SPIE's Smart Structures and Materials Conf. (San Diego, CA, March) 254-70
21. th, Pittsburg, PA, pp. 132-139.
22. Mitcheson P D, Miao P, Stark B H, Yeatman E M, Holmes A S and Green T C 2004 MEMS electrostatic micro-power generator for low frequency operation Sensors and Actuators, A: Physical 115 523-9.
23. Niu P, Chapman P, Riemer R and Zhang X 2004 Evaluation of motions and actuation methods for biomechanical energy harvesting Proc. of IEEE's 35th Annual Power Electronics Specialists Conf. (Aachen, Germany) 2100-6
24. Priya S 2005a Modeling of electric energy harvesting using piezoelectric windmill Applied Physics Letters 87 184101.
25. Raptis, P N, Stephenson, R Hale, J M and White, J R, 2004b "Effect of exposure of piezoelectric paint to water and salt solution," Journal of Materials Science, Vol. 39, pp. 6079 - 6081.
26. Roundy S, Wright P K and Rabaey J 2003 A study of low level vibrations as a power source for wireless sensor nodes Computer Communications 26 1131-44
27. Roundy S, 2005, "On the effectiveness of vibration-based energy harvesting," Journal of Intelligent Material Systems and Structures 16 809-23
28. Sodano, H.A., Park, G. and Inman, D.J., 2004a, "A Review of Power Harvesting Using Piezoelectric Materials," Shock and Vibration Digest, Vol. 36, No. 3, pp. 197-206.
29. Sodano, H.A, Park, G and Inman, D.J., 2004b, "Estimation of Electric Charge Output for Piezoelectric Energy Harvesting," Journal of Strain, Vol. 40, pp. 49-58.
30. Sodano, H.A., Park, G. and Inman, D.J., 2005a, "Generation and Storage of Electricity from Power Harvesting Devices," Journal of Intelligent Material Systems and Structures, Vol. 16, No. l, pp. 67-75.
31. Sodano, H.A., Park, G., and Inman, D.J., 2005b, "Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries," Journal of Intelligent Material Systems and Structures, Vol. 16, No. 10, pp. 799-807.
32. Sodano, H.A., Lloyd, J. and Inman, D.J., 2006, "An Experimental Comparison between Several Active Composite Actuators for Power Generation," Smart Materials and Structures, Vol. 15, pp. 1211-1216.
33. Sterken T, Baert K, Van Hoof C, Puers R, Borghs G and Fiorini P 2004 Comparative modelling for vibration scavengers Proc. of IEEE's Sensors Conf. (Vienna, Austria, October 24-27) 1249-52
34. Taylor G W, Burns J R, Kammann S M, Powers W B and Welsh T R 2001 The energy harvesting eel: a small subsurface ocean/river power generator IEEE Journal of Oceanic Engineering 26 539-47
35. White J R, De Poumeyrol B, Hale J M, Stephenson R., 2004a, "Piezoelectric paint: Ceramic-polymer composites for vibration sensors," Journal of Materials Science, Vol. 39, pp. 3105-3114.
36. th SPIE International Symposium on Smart Structures and Materials, Newport Beach, CA, March 5-9.
37. th annual conference on Smart Structures and Materials, San Diego, CA, Vol. 5765, pp. 1095-1103.
38. Zhang, Y, 2006, "In Situ Fatigue Crack Detection using Piezoelectric Paint Sensor," Journal of Intelligent Material Systems and Structures, Vol. 17, pp. 843-851.