Representative results for condensation measurements at hydraulic diameters 100 microns

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

Volumn 8, Issue , 2007, Pages 1667-1681

  Agarwal, Akhil ^b   Garimella, Srinivas ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^b SHELL GLOBAL SOLUTIONS INTERNATIONAL B V   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONDENSATION; COPPER; DROPS; FLOW OF FLUIDS; HEAT TRANSFER COEFFICIENTS; PRESSURE DROP; REFRIGERANTS; X RAY LITHOGRAPHY; HEAT TRANSFER; MEASUREMENT THEORY;

CONDENSATION PRESSURE; CONJUGATE HEAT TRANSFER ANALYSIS; COPPER SUBSTRATES; HYDRAULIC DIAMETER; LOCAL PRESSURE DROP; SATURATION TEMPERATURE; SUPERHEATED STATE; TEMPERATURE DIFFERENCES; CONDENSATION PRESSURE DROPS;

HEAT TRANSFER; HYDRAULICS;

EID: 44249096348     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2007-43749     Document Type: Conference Paper

References (51)

1. Coleman, J. W., and Garimella, S., 1999, "Characterization of Two-Phase Flow Patterns in Small Diameter Round and Rectangular Tubes, " International Journal of Heat and Mass Transfer, 42(15): Pp. 2869- 2881.
2. Coleman, J. W., and Garimella, S., 2000, "Two-Phase Flow Regime Transitions in Microchannel Tubes: The Effect of Hydraulic Diameter, " American Society of Mechanical Engineers, Heat Transfer Division, Vol. HTD-366, American Society of Mechanical Engineers, pp. 71-83.
3. Coleman, J. W., and Garimella, S., 2003, "Two-Phase Flow Regimes in Round, Square and Rectangular Tubes During Condensation of Refrigerant R134a, " International Journal of Refrigeration, 26(1): Pp. 117- 128.
4. Garimella, S., Agarwal, A., and Killion, J. D., 2005, "Condensation Pressure Drop in Circular Microchannels, " Heat Transfer Engineering, 26(3): Pp. 1-8.
5. Garimella, S., Killion, J. D., and Coleman, J. W., 2002, "An Experimentally Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Circular Microchannels, " Journal of Fluids Engineering, 124(1): Pp. 205-214.
6. Garimella, S., Killion, J. D., and Coleman, J. W., 2003, "An Experimentally Validated Model for Two-Phase Pressure Drop in the Intermittent Flow Regime for Noncircular Microchannels, " Journal of Fluids Engineering, 125(5): Pp. 887-894.
7. Garimella, S., Agarwal, A., and Coleman, J. W., 2003, "Two-Phase Pressure Drops in the Annular Flow Regime in Circular Microchannels, " 21st IIR International Congress of Refrigeration, Vol. ICR0360, International Institute of Refrigeration.
8. Agarwal, A., and Garimella, S., 2006, "Modeling of Pressure Drop During Condensation in Circular and Non- Circular Microchannels, " Proceedings of the IMECE 2006: International Mechanical Engineering Congress and Exposition, IMECE2006-14672, ASME.
9. Garimella, S., and Bandhauer, T. M., 2001, "Measurement of condensation heat transfer coefficients in microchannel tubes, " 2001 ASME International Mechanical Engineering Congress and Exposition, Vol. 369, American Society of Mechanical Engineers, pp. 243-249.
10. Bandhauer, T. M., Agarwal, A., and Garimella, S., 2006, "Measurement and Modeling of Condensation Heat Transfer Coefficients in Circular Microchannels, " Journal of Heat Transfer, 128(10): Pp. 1050-1059.
11. Agarwal, A., Bandhauer, T. M., and Garimella, S., 2007, "Heat Transfer Model for Condensation in Non-Circular Microchannels, " Proceedings of ASME ICNMM2007, 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007-30223.
12. Kandlikar, S., Garimella, S., Li, D., Colin, S., and King, M. R., 2005, Heat Transfer and Fluid Flow in Minichannels and Microchannels, Elsevier Science, p. 450.
13. Carpenter, F. G., and Colburn, A. P., 1951, "The Effect of Vapor Velocity on Condensation inside Tubes, " General Discussion of Heat Transfer, The Institute of Mechanical Engineers and ASME: Pp. 20-26.
14. Soliman, H. M., Schuster, J. R., and Berenson, P. J., 1968, "A General Heat Transfer Correlation for Annular Flow Condensation, " Journal of Heat Transfer, 90: Pp. 267- 276.
15. Traviss, D. P., Rohsenow, W. M., and Baron, A. B., 1973, "Forced-Convection Condensation Inside Tubes: A Heat Transfer Equation For Condenser Design, " ASHRAE Transactions, 79(1): Pp. 157-165.
16. Chen, S. L., Gerner, F. M., and Tien, C. L., 1987, "General Film Condensation Correlations, " Experimental Heat Transfer, 1(2): Pp. 93-107.
17. Lockhart, R. W., and Martinelli, R. C., 1949, "Proposed correlation of data for isothermal two-phase, twocomponent flow in pipes, " Chemical Engineering Progress, 45(1): Pp. 39-45.
18. Friedel, L., 1979, "Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two Phase Pipe Flow, " European Two Phase Flow Group Meeting, Ispra, Italy, paper E2.
19. Shah, M. M., 1979, "A general correlation for heat transfer during film condensation inside pipes, " International Journal of Heat and Mass Transfer, 22(4): Pp. 547-556.
20. Dobson, M. K., and Chato, J. C., 1998, "Condensation in smooth horizontal tubes, " Journal of Heat Transfer, Transactions ASME, 120(1): Pp. 193-213.
21. Cavallini, A., Censi, G., Del Col, D., Doretti, L., Longo, G. A., and Rossetto, L., 2002, "Condensation of halogenated refrigerants inside smooth tubes, " HVAC and R Research, 8(4): Pp. 429-451.
22. Thome, J. R., El Hajal, J., and Cavallini, A., 2003, "Condensation in horizontal tubes, part 2: New heat transfer model based on flow regimes, " International Journal of Heat and Mass Transfer, 46(18): Pp. 3365- 3387.
23. Soliman, H. M., 1986, "Mist-Annular Transition During Condensation And its Influence on the Heat Transfer Mechanism, " International Journal of Multiphase Flow, 12(2): Pp. 277-288.
24. Webb, R. L., and Ermis, K., 2001, "Effect of hydraulic diameter on condensation of R-134A in flat, extruded aluminum tubes, " Journal of Enhanced Heat Transfer, 8(2): Pp. 77-90.
25. Yang, C.-Y., and Webb, R. L., 1996, "Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins, " International Journal of Heat and Mass Transfer, 39(4): Pp. 801-809.
26. Yang, C.-Y., and Webb, R. L., 1996, "Condensation of R- 12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins, " International Journal of Heat and Mass Transfer, 39(4): Pp. 791-800.
27. Yang, C.-Y., and Webb, R. L., 1997, "Predictive model for condensation in small hydraulic diameter tubes having axial micro-fins, " Journal of Heat Transfer, Transactions ASME, 119(4): Pp. 776-782.
28. Zhang, M., and Webb, R. L., 2001, "Correlation of twophase friction for refrigerants in small-diameter tubes, " Experimental Thermal and Fluid Science, 25(3-4): Pp. 131-139.
29. Wang, H. S., and Rose, J. W., 2004, "Film condensation in horizontal triangular section microchannels: A theoretical model, " Proceedings of the Second International Conference on Microchannels and Minichannels (ICMM2004), Jun 17-19 2004, American Society of Mechanical Engineers, New York, NY 10016-5990, United States, pp. 661-666.
30. Wang, H. S., Rose, J. W., and Honda, H., 2004, "A theoretical model of film condensation in square section horizontal microchannels, " Chemical Engineering Research and Design, 82(4): Pp. 430-434.
31. Cavallini, A., Del Col, D., Doretti, L., Matkovic, M., Rossetto, L., and Zilio, C., 2005, "Condensation heat transfer and pressure gradient inside multiport minichannels, " Heat Transfer Engineering, 26(3): Pp. 45- 55.
32. Moser, K. W., Webb, R. L., and Na, B., 1998, "A new equivalent Reynolds number model for condensation in smooth tubes, " Transactions of ASME, Journal of Heat Transfer, 120(2): Pp. 410-417.
33. Akers, W. W., Deans, H. A., and Crosser, O. K., 1959, "Condensation Heat Transfer within Horizontal Tubes, " Chemical Engineering Progress Symposium Series, 55(29): Pp. 171-176.
34. Koyama, S., Kuwahara, K., and Nakashita, K., 2003, "Condensation of refrigerant in a multi-port channel, " First International Conference on Microchannels and Minichannels, Apr 24-25 2003, Vol. 1, American Society of Mechanical Engineers, pp. 193-205.
35. Wang, W. W.-W., Radcliff, T. D., and Christensen, R. N., 2002, "A condensation heat transfer correlation for millimeter-scale tubing with flow regime transition, " Experimental Thermal and Fluid Science, 26(5): Pp. 473- 485.
36. Agarwal, A., 2006, Heat Transfer and Pressure Drop During Condensation of Refrigerants in Microchannels, Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
37. Hewitt, G. F., Shires, G. L., and Bott, T. R., 1994, Process heat transfer, CRC Press; Begell House, Boca Raton, p. 1042.
38. Hewitt, G. F., 1984, "Two-phase Flow Through Orifices, Valves, Bends and Other Singularities, " Proceedings of the 9th Lecture Series on Two-Phase Flow, p. 163.
39. Carey, V. P., 1992, Liquid-vapor phase-change phenomena : An introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment, in Series in chemical and mechanical engineering, G.F. Hewitt and C.L. Tien, Editors, Taylor & Francis Series, Hemisphere Pub. Corp., Washington, D.C., p. xvii, 645.
40. Taylor, B. N., and Kuyatt, C. E., 1994, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, National Institute of Standards and Technology.
41. Chisholm, D., 1973, "Pressure gradients due to friction during the flow of evaporating two-phase mixtures in smooth tubes and channels, " International Journal of Heat and Mass Transfer, 16(2): Pp. 347-358.
42. Mishima, K., and Hibiki, T., 1996, "Some characteristics of air-water two-phase flow in small diameter vertical tubes, " International Journal of Multiphase Flow, 22(4): Pp. 703-712.
43. Chisholm, D., 1967, "A theoretical basis for the Lockhart- Martinelli correlation for two-phase flow, " International Journal of Heat and Mass Transfer, 10(12): Pp. 1767- 1778.
44. Lee, H. J., and Lee, S. Y., 2001, "Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights, " International Journal of Multiphase Flow, 27(5): Pp. 783-796.
45. Chen, I. Y., Yang, K.-S., Chang, Y.-J., and Wang, C.-C., 2001, "Two-phase pressure drop of air-water and R-410A in small horizontal tubes, " International Journal of Multiphase Flow, 27(7): Pp. 1293-1299.
46. Wilson, M. J., Newell, T. A., Chato, J. C., and Infante Ferreira, C. A., 2003, "Refrigerant charge, pressure drop, and condensation heat transfer in flattened tubes, " International Journal of Refrigeration, 26(4): Pp. 442- 451.
47. Jung, D. S., and Radermacher, R., 1989, "Prediction of pressure drop during horizontal annular flow boiling of pure and mixed refrigerants, " International Journal of Heat and Mass Transfer, 32(12): Pp. 2435-2446.
48. Soliman, H. M., Schuster, J. R., and Berenson, P. J., 1968, "A General Heat Transfer Correlation for Annular Flow Condensation, " Transactions of ASME, Journal of Heat Transfer, 90(2): Pp. 267-276.
49. Breber, G., Palen, J. W., and Taborek, J., 1980, "Prediction of Horizontal Tubeside Condensation of Pure Components Using Flow Regime Criteria, " Journal of Heat Transfer, Transactions ASME, 102(3): Pp. 471-476.
50. Kosky, P. G., and Staub, F. W., 1971, "Local Condensing Heat Transfer Coefficients in the Annular Flow Regime, " AIChe Journal, 17(5): Pp. 1037-1043.
51. El-Hajal, J., Thome, J. R., and Cavallini, A., 2003, "Condensation in horizontal tubes, part 1: Two-phase flow pattern map, " International Journal of Heat and Mass Transfer, 46(18): Pp. 3349-3363.