Design and manufacturing of personalized implants and standardized templates for cranioplasty applications

Proceedings of the IEEE International Conference on Industrial Technology

Volumn 2, Issue , 2002, Pages 1025-1030

  Hieu, L C ^a   Bohez, E ^a   Vander Sloten, J ^a,b   Phien, H N ^a   Vatcharaporn, E ^a   Binh, P H ^c   An, P V ^d   To, N C ^e   Oris, P ^a  

^a ASIAN INSTITUTE OF TECHNOLOGY   (Thailand)

^b UNIVERSITY OF LEUVEN   (Belgium)

^c Tran Hung Dao Hospital   (Viet Nam)

^d MINISTRY OF SCIENCE AND TECHNOLOGY   (Viet Nam)

^e Department of Neurosurgery   (Viet Nam)

Author keywords

CAD CAM CNC; Cranioplasty; Implant; Rapid Prototyping (RP); Rapid tooling

Indexed keywords

DESIGN; IMAGE PROCESSING; IMPLANTS (SURGICAL); MANUFACTURE; MEDICAL IMAGE PROCESSING; MEDICAL IMAGING; REVERSE ENGINEERING; ROBOTICS;

CAD/CAM/CNC; COMPUTER AIDED DESIGN SYSTEMS; CRANIOPLASTY; DESIGN SUPPORT; MASS PRODUCTION; MATERIAL TECHNOLOGIES; RAPID TOOLING; TECHNICAL SOLUTIONS;

COMPUTER AIDED DESIGN;

EID: 4344681106     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICIT.2002.1189312     Document Type: Conference Paper

References (22)

1. Kenneth, L. M, David, V F. Ernest, E. M., "Trauma", McGraw-Hill, New York, USA, 1996.
2. Cuong, L. D., "Traffic accidents, where and when? (in Vietnamese) ". Nguoi Lao Dong Newspaper, 21 September 2002, Vietnam.
3. D'Urso, P S. Earwaker, W. J., Barker, T. M., Redmond, M. J., Thompson, R. G., Effeney, D. J., and Tomlinson, F. H., "Custom cranioplasty using stereolithography and acrylic", British Journal of Plastic Surgery, Vol. 53, 2000, pp. 200-204.
4. Bruant A T. Don S. E. and Wiliam B. S., "Computer-Designed Prostheses for Orbitocranial Reconstruction", Journal of Plastic and Reconstructive Surgery, Vo.81, No. 3, 1988, pp. 315-322.
5. Connell, H M. Statbam, P. F., Collie, D. A., Walker F. S. and Moos, K. F., "Use of a template for custom cranioplasty". Phidias - EC funded Network Project on Rapid Prototyping in Medicine, Vol. 2, 1999, pp. 7-8.
6. Tata, K. Fadel, G., Bagchi, A. and Aziz, N., "Efficient slicing for layering manufacturing", Rapid Prototyping Journal, Vol. 4, No. 4, 1998, pp151-167.
7. An, P V. Khe, B. C. and Hanh, T., "Development and application of carbon fiber (cloth) reinforced plastics for replacement of the cranial vault defects (in Vietnamese), Nacentech, National Center of Technical Progress, Ministry of Science, Technology and Environment, Hanoi, Vietnam, 2000.
8. Long, N Q. Tuan, T. Q., Hung, D. P. and Le, T. X., "The use of carbon composite plates for fixation of human fractures. Results of preliminary trials", Proceeding of the 9 th International Conference on Biomedical Engineering, 3-6 December 1997, Singapore, pp. 326-328.
9. An, P V. Khe, B. C. and Kosticov, V. I.", Preparation of carbon materials for medicine", Proceeding of the 9 the International Conference on Biomedical Engineering, 3-6 December 1997, Singapore, pp. 323-325.
10. To, N. C. "The cranioplasty by carbon fiber reinforced plastics (lntost-2) for calvarial defects" (in Vietnamese), Vietnamese Journal of Plastic Surgery, Vol. 7, No. 1, 2001, pp33-37.
11. Tomancok, B B. Wurm, G., Trenkler, J. and Manfred, "Extended cranioplasty with prefabricated carbon fiber reinforced plastic implant", Phidias - EC funded Network Project on Rapid Prototyping in Medicine, Vol. 3, 1999, pp. 7-9.
12. Pompili, A. Caroli, F., Carpanese, L., Caterino, M, Raus, L., Sestili G. and Occhipinti, E., "Cranioplasty performed with a new osteoconductive, osteoinducing hydroxyapatite - drived material", Journal of Neurosurgery, Vol. 89, 1998, pp. 236-242.
13. Perry, M, Banks, P. Richards, R., Rriedman, E. P., and Haw, P., "The use of computer-generated three-dimensional models in orbital reconstruction", British journal of Oral and Maxillofacial Surgery, Vol. 36. 1998, pp. 275-284.
14. Eufinger, H. Wehmoller, M., Machtens, E., Heuser, L., Harders, A., and Kruse, D., "Reconstruction of craniofacial bone defects with individual alloplastics implants based on CAD/CAM-manipulated CT-data", J. Cranio Maxillo-facial Surgery, Vol. 23, 1995, pp. 175-181.
15. Yau, Y Y. Arvier, J. F., Barker, T. M., "Technical note: Maxillofacial biomodeling - preliminary result", The British Journal of Radiology, Vol. 68, 1995, pp. 519-523.
16. Hieu, L C. Bohez, E., Vander Sloten, J., Phien, H. N., Vatcharaporn, E., Binh, P. H., and Oris, P. "Design and manufacturing of cranioplasty implants by 3-axis CNC milling", Technology and Health Care, Vol. 8, 2002, pp. 8-11.
17. Santler, G. Karcher, H., and Ruda, C, "Indications and limitations of three-dimensional models in cranioraaxillofacial surgery", Journal of Cranio-Maxillofacial Surgery, Vol. 26, 1998, pp. 11-16.
18. Jamieson, R. and Hacker, H., "Direct slicing of CAD models for rapid prototyping", Rapid Prototyping Journal, Vol. 1, No. 2, 1995, pp. 4-12.
19. Lao Dong Newspaper, 28 September 2002. "Traffic accidents, the view from the use of motorbikes" (in Vietnamese). Vietnam.
20. Alciatore, D. G. and Wholers, T. T., "Importing and reshaping digitized data for use in rapid prototyping: a system for sculpting polygonal mesh surfaces", Rapid Prototyping Journal, Vol. 2, No. 1, 1996, pp. 13-23.
21. Arvier, J F. Barker, T. M., Yau, Y. Y., D'Urso, PS., Atkinson, R. L. and McDermant, G. R., "Maxillofacial Biomodeling", British Journal of Oral and Maxillofacial Surgery, Vol. 32, 1994, pp. 276-283.
22. Nishiyama, T. Nakajima, T., Yoshimura, Y. and Nakanishi, Y., "Utilising solid models for preoperative shaping of HAP-TCP ceramic bone substitute: application for craniomaxillofacial surgery", International Journal of Plastic Surgery, Vo.17, 1997, pp. 173-177.