Three-dimensional hydrodynamic focusing in polydimethylsiloxane (PDMS) microchannels

Journal of Microelectromechanical Systems

Volumn 13, Issue 4, 2004, Pages 559-567

  Sundararajan, Narayan ^a   Pio, Michael S ^b   Lee, Luke P ^b   Berlin, Andrew A ^a  

^a INTEL CORPORATION   (United States)

^b University of California at Berkeley   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; HYDRODYNAMICS; LASER APPLICATIONS; MICROELECTRONIC PROCESSING; MICROSCOPIC EXAMINATION; MICROSTRUCTURE; MOLECULES; ORGANIC POLYMERS; PIECEWISE LINEAR TECHNIQUES; PLASTICS MOLDING;

LASER SCANNING CONFOCAL MICROSCOPY; MICROCHANNELS; MICROFLUIDICS; POLYDIMETYLSILOXANE; SINGLE MOLECULE DETECTION; THREE DIMENSIONAL FABRICATION; THREE DIMENSIONAL HYDRODYNAMIC FOCUSING CHIPS;

MICROPROCESSOR CHIPS;

EID: 4344660693     PISSN: 10577157     EISSN: None     Source Type: Journal    
DOI: 10.1109/JMEMS.2004.832196     Document Type: Article

References (31)

1. A. vandenBerg, "Microsystems and microfabricated components for (Bio)Chemical analysis," in Biological Molecules in Nanotechnology: The Convergence of Biotechnology, Polymer Chemistry, and Materials Science, ser. IBC Library Series, 1998, pp. 123-132.
2. P. Crosland-Taylor, "A device for counting small particles suspended in fluid through a tube," Nature, vol. 17, pp. 37-38, 1953.
3. J. V. Watson, "The early fluidic and optical physics of cytometry," Cytometry, vol. 38, pp. 2-14, 1999.
4. J. B. Knight, A. Vishwanath, J. P. Brody, and R. H. Austin, "Hydrodynamic focusing on a silicon chip: Mixing nanoliters in microseconds," Phys. Rev. Lett., vol. 80, pp. 3863-3863, 1998.
5. S. Takayama, J. C. McDonald, E. Ostuni, M. Liang, P. J. A. Kenis, R. F. Ismagilov, and G. M. Whitesides, "Patterning cells and their environments using multiple laminar fluid flows in capillary networks," Proc. Nat. Acad. Sci., vol .96, pp. 5545-5548, 1999.
6. D. T. Chiu, N. L. Jeon, S. Huang, R. S. Kane, C. J. Wargo, I. S. Choi, D. E. Ingber, and G. M. Whitesides, "Patterned deposition of cells and proteins onto surfaces by using three-dimensional microfluidic systems," Proc. Nat. Acad. Sci., vol. 97, pp. 2408-2413, 2000.
7. B. Zhao, J. S. Moore, and D. J. Beebe, "Surface-directed liquid flow inside microchannels," Science, vol. 291, pp. 1023-1023, 2001.
8. P. J. A. Kenis, R. F. Ismagilov, S. Takayama, G. M. Whitesides, S. Li, and H. S. White, "Fabrication inside microchannels using fluid flow," Accounts Chem. Res., vol. 33, pp. 841-847, 2000.
9. G. Goranovic, I. R. Perch-Nielsen, U. D. Larsen, A. Wolff, J. P. Kutter, and P. Telleman, "Three-dimensional single step flow sheathing in micro cell sorters," Model. Simul. Microsyst., 2001, to be published.
10. B.-H. Jo, L. M. V. Lerberghe, K. M. Motsegood, and D. J. Beebe, "Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer," J. Microelectromech. Syst., vol. 9, pp. 76-76, 2000.
11. J. C. McDonald, M. L. Chabinyc, S. J. Metallo, J. R. Anderson, A. D. Stroock, and G. M. Whitesides, "Prototyping of microfluidic devices in poly(dimethylsiloxane) using solid-object printing," Anal. Chem., vol. 74, pp. 1537-1545, 2002.
12. H. K. Wu, V. R. Thalladi, S. Whitesides, and G. M. Whitesides, "Using hierarchical self-assembly to form three-dimensional lattices of spheres," J. Amer. Chem. Soc., vol. 124, pp. 14 495-14 502, 2002.
13. N. L. Jeon, D. T. Chiu, C. J. Wargo, H. K. Wu, I. S. Choi, J. R. Anderson, and G. M. Whitesides, "Design and fabrication of integrated passive valves and pumps for flexible polymer 3-dimensional microfluidic systems," Biomed. Microdevices, vol. 4, pp. 117-121, 2002.
14. M. A. Unger, H.-P. Chou, T. Thorsen, A. Scherer, and S. R. Quake, "Monolithic microfabricated valves and pumps by multilayer soft lithography," Science, vol. 288, pp. 113-113, 2000.
15. W. Zhou, S. M. Kuebler, K. L. Braun, T. Yu, J. K. Cammack, C. K. Ober, J. W. Perry, and S. R. Marder, "An efficient two-photon-generated photoacid applied to positive-tone 3D microfabrication," Science, vol. 296, pp. 1106-1106, 2002.
16. H. Becker and U. Heim, Sens. Actuators A, Phys., vol. 83, pp. 130-135, 2000.
17. E. L'Hostis, Sens. Actuators B, Chem., vol. 64, pp. 156-162, 2000.
18. L. P. Lee, Sens. Actuators A, Phys., vol. 71, pp. 144-149, 1998.
19. X. Zhang, X. N. Jiang, and C. Sun, "Micro-stereolithography of polymeric and ceramic microstructures," Sens. Actuators A, Phys., vol. 77, pp. 149-156, 1999.
20. J. R. Anderson, D. T. Chiu, R. J. Jackman, O. Cherniavskaya, J. C. McDonald, H. Wu, S. H. Whitesides, and G. M. Whitesides, "Fabrication of topologically complex three-dimensional microfluidic systems in PDMS by rapid prototyping," Anal. Chem., vol. 72, pp. 3158-3164, 2000.
21. X. Chen, H. Wu, C. Mao, and G. M. Whitesides, "A prototype two-dimensional capillary electrophoresis system fabricated in poly(dimethylsiloxane)," Anal. Chem., vol. 74, pp. 1772-1778, 2002.
22. O. Hofmann, G. Voirin, P. Niedermann, and A. Manz, "Three-dimensional microfluidic confinement for efficient sample delivery to biosensor surfaces. Application to immunoassays on planar optical waveguides," Anal. Chem., vol. 74, pp. 5243-5250, 2002.
23. O. Hofmann, P. Niedermann, and A. Manz, "Modular approach to fabrication of three-dimensional microchannel systems in PDMS - application to sheath flow microchips," Lab Chip, vol. 1, pp. 108-114, 2001.
24. S. Shoji, K. Akahori, K. Tashiro, H. Sato, and N. Honda, "Design and fabrication of micromachined chemical/biochemical systems," RIKEN Rev., vol. 36, pp. 8-11, 2001.
25. J. M. K. Ng, I. Gitlin, A. D. Stroock, and G. M. Whitesides, "Components for integrated poly(dimethylsiloxane) microfluidic systems," Electrophoresis, vol. 23, pp. 3461-3473, 2002.
26. J. C. McDonald and G. M. Whitesides, "Poly(dimethylsiloxane) as a material for fabricating microfluidic devices," Accounts Chem. Res., vol. 35, pp. 491-499, 2002.
27. J. Stephan, K. Dorre, S. Brakmann, T. Winkler, T. Wetzel, M. Lapczyna, M. Stuke, B. Angerer, W. Ankenbauer, Z. Foldes-Papp, R. Rigler, and M. Eigen, "Toward a general procedure for sequencing single DNA molecules," J. Biotechnol., vol. 86, pp. 255-267, 2001.
28. J. N. Demas, M. Wu, P. M. Goodwin, R. L. Affleck, and R. A. Keller, "Fluorescence detection in hydrodynamically focused sample streams: Reduction of diffusional defocusing by association of analyte with high-molecular-weight species," Appl. Spectroscopy, vol. 52, pp. 755-762, 1998.
29. P. M. Goodwin, H. Cai, J. H. Jett, S. L. IshaugRiley, N. P. Machara, D. J. Semin, A. VanOrden, and R. A. Keller, "Application of single molecule detection to DNA sequencing," Nucleosides & Nucleotides, vol. 16, pp. 543-550, 1997.
30. P. M. Goodwin, H. Cai, J. H. Jett, R. A. Keller, and D. J. Semin, "DNA sequencing by single molecule detection," Progress in Biophysics & Molecular Biology, vol. 65, p. 25, 1996.
31. W. P. Ambrose, P. M. Goodwin, J. H. Jett, A. V. Orden, J. H. Werner, and R. A. Keller, "Single molecule fluorescence spectroscopy at ambient temperature," Chem. Rev., vol. 99, pp. 2929-2956, 1999.