The high-speed deformation behavior of TRIP steels

Metals and Materials International

Volumn 14, Issue 2, 2008, Pages 139-146

  Choi, Ildong ^a   Bruce, Denise M ^b   Matlock, David K ^c   Speer, John G ^c  

^a Korea Maritime University   (South Korea)

^b Air Force Materiel Command   (United States)

^c Department of Metallurgical and Materials Engineering   (United States)

Author keywords

Absorbed energy; High speed deformation; Strain rate sensitivity; TRIP steel; Uniform elongation

Indexed keywords

DEFORMATION; GAGES; HIGH STRENGTH STEEL; HIGH-STRENGTH LOW-ALLOY STEEL; PLASTICITY; ROLLING; STRAIN HARDENING; TENSILE STRENGTH; TRANSFORMATION INDUCED PLASTICITY STEEL;

ABSORBED ENERGY; HIGH STRAIN RATES; HIGH-SPEED DEFORMATION; RETAINED AUSTENITE; STRAIN RATE SENSITIVITY; STRAIN-HARDENING EXPONENT; ULTIMATE TENSILE STRENGTH; UNIFORM ELONGATION;

STRAIN RATE;

EID: 43349102605     PISSN: 15989623     EISSN: None     Source Type: Journal    
DOI: 10.3365/met.mat.2008.04.139     Document Type: Article

References (17)

1. 1. ULSAB-AVC, Technical Transfer Dispatch #6, Appendix III, p. 3 (2001).
2. 2. W. Bleck I. Schael 2000 Steel Research 71 173 173 1:CAS:528:DC%2BD3cXntFSmtLc%3D W. Bleck and I. Schael, Steel Research 71, 173 (2000).
3. 3. O. Moriau, L. Tosal-Martinez, P. Verleysen, and J. Degrieck, Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, p. 247, Ghent, Belgium (2002).
4. 4. R. Y. Fu, X. C. Wei, W. Shi, L. Li, B. C. De Cooman, P. Wollants, X. D. Zhu, and L. Wang, Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, p. 287, Ghent, Belgium (2002).
5. 5. M. Milititsky D. K. Matlock J. G. Speer C. M. Cady M. C. Mataya 2001 SAE Technical Paper No. 2001-01-0082 SAE Warrendale, PA M. Milititsky, D. K. Matlock, J. G. Speer, C. M. Cady, and M. C. Mataya, SAE Technical Paper No. 2001-01-0082, SAE, Warrendale, PA (2001).
6. 6. K. Miura S. Takagi T. Hira O. Furukimi S. Tanimura 1998 SAE Technical Paper No. 980952 SAE Warrendale, PA K. Miura, S. Takagi, T. Hira, O. Furukimi, and S. Tanimura, SAE Technical Paper No. 980952, SAE, Warrendale, PA (1998).
7. 7. I. D. Choi D. M. Bruce S. J. Kim C. G. Lee S. H. Park D. K. Matlock J. G. Speer 2002 ISIJ Int. 42 1483 1483 10.2355/isijinternational.42.1483 1:CAS:528:DC%2BD3sXpvFajtg%3D%3D I. D. Choi, D. M. Bruce, S. J. Kim, C. G. Lee, S. H. Park, D. K. Matlock, and J. G. Speer, ISIJ Int. 42, 1483 (2002).
8. 8. M. A. Meyers 1999 M. A. Meyers R. W. Armstrong H. O. Kirchner Experimental Techniques: Methods to Produce Dynamic Deformation, in Mechanics and Materials John Wiley & Sons, Inc. New York 296 322 M. A. Meyers, Experimental Techniques: Methods to Produce Dynamic Deformation, in Mechanics and Materials (eds., M. A. Meyers, R. W. Armstrong, and H. O. Kirchner), p. 296–322, John Wiley & Sons, Inc., New York (1999).
9. 9. D. M. Bruce, Ph. D. Thesis, p. 87–119, Colorado School of Mines, Golden, CO, USA (2003).
10. 10. I. D. Choi D. M. Kim S. J. Kim D. M. Bruce D. K. Matlock J. G. Speer 2006 Met. Mater.-Int. 12 13 13 10.1007/BF03027517 1:CAS:528:DC%2BD28XksFChsbw%3D I. D. Choi, D. M. Kim, S. J. Kim, D. M. Bruce, D. K. Matlock, and J. G. Speer, Met. Mater.-Int. 12, 13 (2006).
11. 11. I. D. Choi D. M. Son S. J. Kim D. K. Matlock J. G. Speer 2006 SAE Technical Paper No. 2006-01-1434 SAE Warrendale, PA I. D. Choi, D. M. Son, S. J. Kim, D. K. Matlock, and J. G. Speer, SAE Technical Paper No. 2006-01-1434, SAE, Warrendale, PA (2006).
12. 12. J. Harding 1987 T. Z. Blazynski Materials at High Strain Rates Elsevier Applied Science New York 133 146 J. Harding, Materials at High Strain Rates (ed., T. Z. Blazynski), p. 133–146. Elsevier Applied Science, New York (1987).
13. 13. G. E. Dieter 1986 Mechanical Metallurgy 3rd ed. McGraw Hill New York 307 309 G. E. Dieter, Mechanical Metallurgy, 3rd ed., p. 307–309, McGraw Hill, New York (1986).
14. 14. D. S. Clark D. S. Wood 1950 Proc. Amer. Soc. Test. Mater. 50 577 577 D. S. Clark and D. S. Wood, Proc. Amer. Soc. Test. Mater. 50, 577 (1950).
15. 15. G. E. Dieter 1986 Mechanical Metallurgy 3rd ed. McGraw Hill New York 280 280 G. E. Dieter, Mechanical Metallurgy, 3rd ed., p. 280, McGraw Hill, New York (1986).
16. 16. D. M. Bruce, D. K. Matlock, and J. G. Speer, CSM Internal Report (2002).
17. 17. I. D. Choi D. M. Son S. J. Kim D. K. Matlock J. G. Speer 2006 The 3 rd Int. Conf. on Adv. Structural Steels Springer-Verlag Gyeongju, Korea 816 816 I. D. Choi, D. M. Son, S. J. Kim, D. K. Matlock, J. G. Speer The 3 rd Int. Conf. on Adv. Structural Steels, p. 816, The Korean Institute of Metals and Materials, Gyeongju, Korea (2006).