메뉴 건너뛰기




Volumn 40, Issue 8, 2008, Pages 629-635

Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys

Author keywords

Adiabatic shear band; Hopkinson bar; IR detectors; Mg AM50; Ti6Al4V

Indexed keywords

FAILURE (MECHANICAL); SHEAR BANDS; STRAIN RATE; THERMAL EFFECTS;

EID: 42749084637     PISSN: 01676636     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechmat.2008.03.002     Document Type: Article
Times cited : (164)

References (27)
  • 3
    • 42749094428 scopus 로고    scopus 로고
    • Dorogoy, A., 2005. Personal communication.
    • Dorogoy, A., 2005. Personal communication.
  • 4
    • 24144445101 scopus 로고    scopus 로고
    • Numerical validation of the shear compression specimen (SCS). Part I: Quasi-static large strain testing
    • Dorogoy A., and Rittel D. Numerical validation of the shear compression specimen (SCS). Part I: Quasi-static large strain testing. Exp. Mech. 45 2 (2005) 167-177
    • (2005) Exp. Mech. , vol.45 , Issue.2 , pp. 167-177
    • Dorogoy, A.1    Rittel, D.2
  • 5
    • 0026940954 scopus 로고
    • On the measurement of local strain and temperature during the formation of adiabatic shear bands
    • Duffy J., and Chi Y. On the measurement of local strain and temperature during the formation of adiabatic shear bands. Mater. Sci. Eng. A 157 2 (1992) 195-210
    • (1992) Mater. Sci. Eng. A , vol.157 , Issue.2 , pp. 195-210
    • Duffy, J.1    Chi, Y.2
  • 6
    • 0000549335 scopus 로고
    • The heat developed during plastic extension of metals
    • Farren W.S., and Taylor G.I. The heat developed during plastic extension of metals. Proc. Roy. Soc. CVII (1925) 422-451
    • (1925) Proc. Roy. Soc. , vol.CVII , pp. 422-451
    • Farren, W.S.1    Taylor, G.I.2
  • 7
    • 0023271430 scopus 로고
    • Measurement of the temperature profile during shear band formation in mild steels deforming at high-strain rates
    • Hartley K.A., Duffy J., and Hawley R.H. Measurement of the temperature profile during shear band formation in mild steels deforming at high-strain rates. J. Mech. Phys. Solids 35 3 (1987) 283-301
    • (1987) J. Mech. Phys. Solids , vol.35 , Issue.3 , pp. 283-301
    • Hartley, K.A.1    Duffy, J.2    Hawley, R.H.3
  • 8
    • 0031076621 scopus 로고    scopus 로고
    • Recrystallization kinetics within adiabatic shear bands
    • Hines J.A., and Vecchio K.S. Recrystallization kinetics within adiabatic shear bands. Acta Mater. 45 2 (1997) 635-649
    • (1997) Acta Mater. , vol.45 , Issue.2 , pp. 635-649
    • Hines, J.A.1    Vecchio, K.S.2
  • 9
    • 0034053701 scopus 로고    scopus 로고
    • Partition of plastic work into heat and stored energy in metals
    • Hodowany J., Ravichandran G., Rosakis A.J., and Rosakis P. Partition of plastic work into heat and stored energy in metals. Exp. Mech. 40 2 (2000) 113-123
    • (2000) Exp. Mech. , vol.40 , Issue.2 , pp. 113-123
    • Hodowany, J.1    Ravichandran, G.2    Rosakis, A.J.3    Rosakis, P.4
  • 10
    • 0031673831 scopus 로고    scopus 로고
    • Determination of temperature rise during high strain rate deformation
    • Kapoor R., and Nemat-Nasser S. Determination of temperature rise during high strain rate deformation. Mech. Mater. 27 (1998) 1-12
    • (1998) Mech. Mater. , vol.27 , pp. 1-12
    • Kapoor, R.1    Nemat-Nasser, S.2
  • 11
    • 0032204847 scopus 로고    scopus 로고
    • Adiabatic shear band in a Ti-6Al-4V titanium alloy
    • Liao S.C., and Duffy J. Adiabatic shear band in a Ti-6Al-4V titanium alloy. J. Mech. Phys. Solids 46 11 (1998) 2201-2231
    • (1998) J. Mech. Phys. Solids , vol.46 , Issue.11 , pp. 2201-2231
    • Liao, S.C.1    Duffy, J.2
  • 12
    • 0032658990 scopus 로고    scopus 로고
    • A constitutive relation and failure criterion for Ti6A14V alloy at impact rates of strain
    • Macdougall D.A.S., and Harding J. A constitutive relation and failure criterion for Ti6A14V alloy at impact rates of strain. J. Mech. Phys. Solids 47 5 (1999) 1157-1185
    • (1999) J. Mech. Phys. Solids , vol.47 , Issue.5 , pp. 1157-1185
    • Macdougall, D.A.S.1    Harding, J.2
  • 13
    • 0023846975 scopus 로고
    • An experimental study of the formation process of adiabatic shear bands in a structural steel
    • Marchand A., and Duffy J. An experimental study of the formation process of adiabatic shear bands in a structural steel. J. Mech. Phys. Solids 36 3 (1988) 251-283
    • (1988) J. Mech. Phys. Solids , vol.36 , Issue.3 , pp. 251-283
    • Marchand, A.1    Duffy, J.2
  • 14
    • 0028549591 scopus 로고
    • Field measurement of the dynamic deformation field around a growing adiabatic shear band at the tip of a dynamically loaded crack or notch
    • Mason J.J., Rosakis A.J., and Ravichandran G. Field measurement of the dynamic deformation field around a growing adiabatic shear band at the tip of a dynamically loaded crack or notch. J. Mech. Phys. Solids 42 11 (1994) 1679-1697
    • (1994) J. Mech. Phys. Solids , vol.42 , Issue.11 , pp. 1679-1697
    • Mason, J.J.1    Rosakis, A.J.2    Ravichandran, G.3
  • 15
    • 0023541928 scopus 로고
    • Analytical characterization of the shear localization in thermoviscoplastic materials
    • Molinari A., and Clifton R.J. Analytical characterization of the shear localization in thermoviscoplastic materials. J. Appl. Mech. 54 4 (1987) 806-812
    • (1987) J. Appl. Mech. , vol.54 , Issue.4 , pp. 806-812
    • Molinari, A.1    Clifton, R.J.2
  • 16
    • 0035801941 scopus 로고    scopus 로고
    • Microstructural evolution in adiabatic shear bands in Ta and Ta-W alloys
    • Perez-Prado M.T., Hines J.A., and Vecchio K.S. Microstructural evolution in adiabatic shear bands in Ta and Ta-W alloys. Acta Mater. 49 (2001) 2905-2917
    • (2001) Acta Mater. , vol.49 , pp. 2905-2917
    • Perez-Prado, M.T.1    Hines, J.A.2    Vecchio, K.S.3
  • 17
    • 0034047034 scopus 로고    scopus 로고
    • Infrared temperature sensing of mechanically loaded specimens: thermal analysis
    • Rabin Y., and Rittel D. Infrared temperature sensing of mechanically loaded specimens: thermal analysis. Exp. Mech. 40 2 (2000) 197-202
    • (2000) Exp. Mech. , vol.40 , Issue.2 , pp. 197-202
    • Rabin, Y.1    Rittel, D.2
  • 18
    • 0033078697 scopus 로고    scopus 로고
    • The conversion of plastic work to heat during high strain rate deformation of glassy polymers
    • Rittel D. The conversion of plastic work to heat during high strain rate deformation of glassy polymers. Mech. Mater. 31 2 (1999) 131-139
    • (1999) Mech. Mater. , vol.31 , Issue.2 , pp. 131-139
    • Rittel, D.1
  • 19
    • 0036494729 scopus 로고    scopus 로고
    • A shear compression specimen for large strain testing
    • Rittel D., Lee S., and Ravichandran G. A shear compression specimen for large strain testing. Exp. Mech. 42 1 (2002) 58-64
    • (2002) Exp. Mech. , vol.42 , Issue.1 , pp. 58-64
    • Rittel, D.1    Lee, S.2    Ravichandran, G.3
  • 20
    • 33344470120 scopus 로고    scopus 로고
    • Adiabatic shear failure and dynamic stored energy of cold work
    • Rittel D., Wang Z.G., and Merzer M. Adiabatic shear failure and dynamic stored energy of cold work. Phys. Rev. Lett. 96 (2006) 075502
    • (2006) Phys. Rev. Lett. , vol.96 , pp. 075502
    • Rittel, D.1    Wang, Z.G.2    Merzer, M.3
  • 21
    • 0000575531 scopus 로고
    • The latent energy remaining in a metal after cold working
    • Taylor G.I., and Quinney H. The latent energy remaining in a metal after cold working. Proc. Roy. Soc. London 143 (1934) 307-326
    • (1934) Proc. Roy. Soc. London , vol.143 , pp. 307-326
    • Taylor, G.I.1    Quinney, H.2
  • 22
    • 0242500199 scopus 로고    scopus 로고
    • Comparison of two methods of measuring the rapid temperature rises in split Hopkinson bar specimens
    • Walley S.M., Proud W.G., Rae P.J., and Field J.E. Comparison of two methods of measuring the rapid temperature rises in split Hopkinson bar specimens. Rev. Sci. Instrum. 71 4 (2000) 1766-1771
    • (2000) Rev. Sci. Instrum. , vol.71 , Issue.4 , pp. 1766-1771
    • Walley, S.M.1    Proud, W.G.2    Rae, P.J.3    Field, J.E.4
  • 23
    • 44949280417 scopus 로고
    • On the tenperature distribution at the vicinity of dynamically propagating cracks in 4340 steel
    • Zehnder A.T., and Rosakis A.J. On the tenperature distribution at the vicinity of dynamically propagating cracks in 4340 steel. J. Mech. Phys. Solids 39 3 (1991) 385-415
    • (1991) J. Mech. Phys. Solids , vol.39 , Issue.3 , pp. 385-415
    • Zehnder, A.T.1    Rosakis, A.J.2
  • 25
    • 33746947833 scopus 로고
    • Effect of strain rate upon plastic flow of steel
    • Zener C., and Hollomon J.H. Effect of strain rate upon plastic flow of steel. J. Appl. Phys. 15 1 (1944) 22-32
    • (1944) J. Appl. Phys. , vol.15 , Issue.1 , pp. 22-32
    • Zener, C.1    Hollomon, J.H.2
  • 26
    • 0030168899 scopus 로고    scopus 로고
    • Dynamically propagating shear bands in impact-loaded prenotched plates. II - Numerical Simulations
    • Zhou M., Rosakis A.J., and Ravichandran G. Dynamically propagating shear bands in impact-loaded prenotched plates. II - Numerical Simulations. J. Mech. Phys. Solids 44 6 (1996) 1007-1032
    • (1996) J. Mech. Phys. Solids , vol.44 , Issue.6 , pp. 1007-1032
    • Zhou, M.1    Rosakis, A.J.2    Ravichandran, G.3
  • 27
    • 0030164062 scopus 로고    scopus 로고
    • Dynamically propagating shear bands in impact-loaded prenotched plates. I - Experimental investigations of temperature signatures and propagation speed
    • Zhou M., Rosakis A.J., and Ravichandran G. Dynamically propagating shear bands in impact-loaded prenotched plates. I - Experimental investigations of temperature signatures and propagation speed. J. Mech. Phys. Solids 44 6 (1996) 981-1006
    • (1996) J. Mech. Phys. Solids , vol.44 , Issue.6 , pp. 981-1006
    • Zhou, M.1    Rosakis, A.J.2    Ravichandran, G.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.