Restoration of antique temples: Experimental investigations on the pull-out behaviour of anchors in marble;Restaurierung Antiker Tempel: Experimentelle Untersuchungen zum Ausziehverhalten von Verankerungen im Marmor

Bautechnik

Volumn 85, Issue 2, 2008, Pages 109-119

  Kourkoulis, Stavros ^a   Papanicolopulos, Stefanos Aldo ^a   Marinelli, Aikaterini ^b   Vayas, Loannis ^b  

^a Laboratory of Strength of Materials

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 42649086143     PISSN: 09328351     EISSN: 14370999     Source Type: Trade Journal    
DOI: 10.1002/bate.200810010     Document Type: Article

References (31)

1. [1] International Council on Monuments and Sites (ICOMOS), The International Charter of Venice, 1964.
2. [2] Zambas, C., Ioannidou, M., Papanikolaou, A.: The use of Titanium reinforcements for the restoration of marble architectural members of Acropolis Monuments, IIC Congress on Case Studies in the Conservation of Stone and Wall Paintings, The International Institute for Conservation of Historic and Artisttic Works, Bologna, Italy, pp. 138–143, 1986.
3. [3] Zambas, C.: Structural problems for the restoration of the Parthenon, Study for the Restoration of the Parthenon, Ministry of Culture, Committee for the Preservation of the Acropolis Monuments, vol. 2a, Athens, 1989, pp. 153–180 (in Greek with summary in English).
4. [4] Ioannidou, M.: Structural problems of the Propylaea, Study for the Restoration of the Propylaea, Ministry of Culture, Committee for the Preservation of the Acropolis Monuments, vol. 1, Athens, 1994, pp. 339–448 (in Greek with summary in English).
5. [5] Zambas, C.: Structural repairs to the monuments of the Acropolis–the Parthenon, Proceedings of the Institution of Civil Engineers, V. 92, November 1992, pp. 166–176.
6. [6] Ioannidou, M., Pashalides, B.: Joining the beams of the Propylaia with titanium reinforcements, Proceedings of the 5 th International Meeting for the Restoration of the Acropolis Monuments, 4–6 October 2002, pp. 291–300, Committee for the Preservation of the Acropolis Monuments Publications, Athens, Greece. 2002.
7. [7] Mentzini, M.: Joining epistyles and drums of Parthenon using titanium reinforcement: A new approach, Proceedings of the 5 th International Meeting for the Restoration of the Acro‐polis Monuments, 4–6 October 2002, pp. 233–242, Committee for the Preservation of the Acropolis Monuments Publications, Athens, Greece. 2002.
8. [8] Atkinson, C., Avila, J., Betz, E., Smelser, R. E.: The rod pull‐out problem, theory and experiment, J. Mech. Phys. Solids, 30(3), pp. 97–120, 1982.
9. [9] Murakami, H., Hegemier, G. A.: On simulating steel‐concrete interaction in reinforced concrete. Part I: theoretical development, Mechanics of Materials, 5, pp. 171–185, 1986.
10. [10] Colak, A.: Parametric study of factors affecting the pull‐out strength of steel rods bonded into precast concrete panels, Int. J. of Adhesion & Adhesives, 21, pp. 487–493, 2001.
11. [11] Obata, M., Inoue, M., Goto, Y.: The failure mechanism and the pull‐out strength of a bond‐type anchor near a free edge, Mechanics of Materials, 28, pp. 113–122, 1998.
12. [12] Banholzer, B., Brameshuber, W., Jung, W.: Analytical evaluation of pull‐out tests–the direct problem, Cement & Concrete Composites, 27, pp. 93–101, 2005.
13. [13] Banholzer, B., Brameshuber, W., Jung, W.: Analytical evaluation of pull‐out tests–the inverse problem, Cement & Concrete Composites, 28, pp. 564–571, 2006.
14. [14] RILEM/CEB/FIP RECOMMENDATION.–Bond test for reinforcing steel, Materials and Structures, 6 (32), 1973.
15. [15] Eligehausen, R., Appl, J., Lehr, B., Meszaros, J., Fuchs, W.: Tragverhalten und Bemessung von Befestigungen mit Verbunddübeln unter Zugbeanspruchung, Beton‐ und Stahlbetonbau 99 (2004), H. 7, 561–570.
16. [16] Pinchin, D. J., Tabor, D.: Inelastic behaviour on steel wire pull‐out from Portland cement mortar, J. of Materials Science, 13, pp. 1261–1266, 1978.
17. [17] Bartos, P.: Analysis of pull‐out tests on fibres embedded in brittle matrices, J. of Materials Science, 15, pp. 3122–3128, 1980.
18. [18] de Lorenzis, L., Rizzo, A., La Te‐gola, A.: A modified pull‐out test for bond of near‐surface mounted FRP rods in concrete, Composites: part B, 33, pp. 589–603, 2002.
19. [19] Al‐Mahmoud, F., Castel, A., Francois, R., Tourner, C.: Effect of surface pre‐conditioning on bond of carbon fibre reinforced polymer rods to concrete, Cement & Concrete Composites, to appear, 2007.
20. [20] Shelton, J. C., Loukota, R. A.: Pull‐out strength of screws from cortical bone in the maxillo‐facial region, J. of Materials Science: Materials in Medicine, 7, pp. 231–235, 1996.
21. [21] Chazistergos, P., Ferentinos, G., Magnissalis, E. A., Kourkoulis, S. K.: The pull‐out strength of transpedicular screws in posterior spinal fusions, 16 th European Conference on Fracture, Alexandroupoli, Hellas, Abstracts of the ECF16, E. E. Gdoutos (Ed.), Springer, Dordrecht, pp. 417–418, 2006.
22. [22] Zhang, Q. H., Tan, S. H., Chou, S. M.: Effects of bone materials on the pull‐out strength in human spine, Medical Engineering and Physics, 28, pp. 795–801, 2006.
23. [23] Paschalides, V., Mentzini, M., Kourkoulis, S. K., Vardoulakis, I.: Experimental evaluation of a new method for the calculation of the put‐together‐reinforcement of fractured structural members (in Greek), 1 st Nat. Conf. Greek Association of Mechanical Engineers, Athens, Greece, March 28–30, 2005, p. B56/72‐83, 2005.
24. [24] Kourkoulis, S. K., Ganniari‐Papageorgiou, E., Mentzini, M.: Experimental and numerical evaluation of a new method for joining together fragmented structural members, Heritage, Weathering and Conservation (HWC‐2006) Conference, Madrid, Spain, June 2006. Published in: “Heritage, Weathering and Conservation”, R. Fort et al. (Eds.), Balkema, The Netherlands, pp. 657–665, 2006.
25. [25] Tassogiannopoulos, A. G.: A Contribution to the Study of the Properties of Structural Natural Stones of Greece, Phd Dissertation, Nat. Techn. Univ. of Athens, Greece, 1986.
26. [26] Vardoulakis, I., Kourkoulis, S. K., Exadaktylos, G. E., Rosakis, A.: Mechanical properties and compatibility of natural building stones of ancient monuments: Dionysos marble, Proceedings of the Interdisciplinary Workshop “The building stone in monuments”, Athens, November 2001, IGME Publishing, Eds. M. Varti‐Mataranga and Y. Katsikis, pp. 187–210, 2002.
27. [27] Vardoulakis, I., Kourkoulis, S. K.: Mechanical properties of Dionysos marble: Final report of the Environment Project EV5V‐CT93‐0300: “Monuments under seismic action”. Nat. Techn. Univ. of Athens, Athens, Greece, 1997.
28. [28] Yue, C. Y., Loi, H. C.: Factors which influence the reliability of the assessment of interfacial bonding in fibrous composites using the pull‐out test, Int. J. of Adhesion and Adhesives, 21, pp. 309–323, 2001.
29. [29] Yue, C. Y., Loi, H. C.: Effect of the loading system on the stress distribution in the fully embedded fibre pull‐out test, J. Mat. Sci., 29, pp. 1901–1909, 1994.
30. [30] Tsai, K. H., Kim, K. Y.: The micromechanics of fiber pull‐out, J. Mech. Phys. Solids, 44 (7), pp. 1147–1177, 1996.
31. [31] Alwan, J. M., Naaman, A. E., Hansen, W.: Pull‐out work of steel fibers from cementitious composites: Analytic investigation, Cement & Concrete Composites, 13, pp. 247–255, 1991.