A three-dimensional microfabrication system for biodegradable polymers with high resolution and biocompatibility

Journal of Micromechanics and Microengineering

Volumn 18, Issue 2, 2008, Pages

  Yamada, Akira ^a   Niikura, Fuminori ^a   Ikuta, Koji ^a  

^a NAGOYA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCOMPATIBILITY; BIODEGRADABLE POLYMERS; MELTING; MICROSTRUCTURE;

MICRO-COIL SPRINGS; MICRO-LEVEL FORMS; TOXIC SOLVENTS;

MICROFABRICATION;

EID: 42549099322     PISSN: 09601317     EISSN: 13616439     Source Type: Journal    
DOI: 10.1088/0960-1317/18/2/025035     Document Type: Article

References (39)

1. Kulkarni R K, Pani K C, Neuman C and Leonard F 1966 Polylactic acid for surgical implants Arch. Surg. 93 839-43
2. Reed A M and Gilding D K 1981 Biodegradable polymers for use in surgery-poly(glycolic)/poly(lactic acid) homo and copolymers: 2. In vitro degradation Polymer 22 494-8
3. Holland S J, Tighe B J and Gould P L 1986 Polymers for biodegradable medical devices: 1. The potential of polyesters as controlled macromolecular release systems J. Control. Release 4 155-80
4. Langer R and Vacanti J P 1993 Tissue engineering Science 260 920-6
5. Peter S J, Miller M J, Yasko A W, Yaszemski M J and Mikos A G 1998 Polymer concepts in tissue engineering J. Biomed. Mater. Res. 43 422-7
6. Bonassar L J and Vacanti C A 2002 Tissue engineering: the first decade and beyond J. Cell. Biochem. Suppl. 30-31 297-303
7. Hutmacher D W, Kirsch A, Ackermann K L and Hurzeler M B 2001 A tissue engineering cell-occlusive device for hard tissue regeneration-A preliminary report Int. J. Periodontics Restorative Dent. 21 49-59
8. Kai C C and Fai L K 1998 Rapid Prototyping: Principles and Applications in Manufacturing (Singapore: World Scientific)
9. Mikos A G, Sarakinos G, Leite S M, Vacanti J P and Langer R 1993 Laminated three-dimensional biodegradable foams for use in tissue engineering Biomaterials 14 323-30
10. Giordana R A, Wu B M, Borland S W, Cima L G, Sachs E M and Cima M J 1996 Mechanical properties of dense polylactic acid structures fabricated by three-dimensional printing J. Biomater. Sci. Polym. Ed. 8 63-75
11. Hutmacher D W 2000 Scaffolds in tissue engineering bone and cartilage Biomaterials 21 2529-43
12. Hutmacher D W, Schantz T, Zein I, Ng K W, Teoh S H and Tan K C 2001 Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling J. Biomed. Mater. Res. 55 203-16
13. Sodian R, Fu P, Lueders C, Szymanski D, Fritsche C, Gutberlet M, Hoerstrup S P, Hausmann H, Lueth T and Hetzer R 2005 Tissue engineering of vascular conduits: fabrication of custom-made scaffolds using rapid prototyping techniques Thorac. Cardiovasc. Surg 55 144-9
14. Swieszkowski W, Tuan B H, Kurzydlowski K J and Hutmacher D W 2007 Repair and regeneration of osteochondral defects in the articular joints Biomol. Eng. 24 489-95
15. Weigel T, Schinkel G and Lendlein A 2006 Design and preparation of polymeric scaffolds for tissue engineering Expert Rev. Med. Dev. 3 835-51
16. Cooke M N, Fisher J P, Dean D, Rimnac C and Mikos A G 2003 Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth J. Biomed. Mater. Res. 64B 65-9
17. Matsuda T and Mizutani M 2002 Liquid acrylate-endcapped biodegradable poly(e-caprolactone-co-trimethylene carbonate): II. Computer-aided stereolithographic microarchitectural surface photoconstructs J. Biomed. Mater. Res. 62 395-403
18. Schuster M, Turecek C, Kaiser B, Stampfl J, Liska R and Varga F 2007 Evaluation of biocompatible photopolymers: I. Photoreactivity and mechanical properties of reactive diluents J. Macromol. Sci. A: Pure Appl. Chem. 44 547-57
19. Landers R, Pfister A, Hübner U, John H, Schmelzeisen R and Mülhaupt R 2002 Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques J. Mater. Sci. 37 3107-16
20. Dhariwala B, Hunt E and Boland T 2004 Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography Tissue Eng. 10 1316-22
21. Arcaute K, Ochoa L, Medina F, Elkins C, Mann B and Wicker R 2005 Three-dimensional PEG hydrogel construct fabrication using streolithography Mater. Res. Soc. Symp. Proc. 874 191-7
22. Campagnola P J, Delguidice D M, Epling G A, Hoffacker K D, Howell A R, Pitts D J and Goodman S L 2000 3-Dimensional submicron polymerization of acrylamide by multiphoton excitation of xanthene dyes Macromolecules 33 1511-3
23. Pitts D J, Campagnola P J, Epling G A and Goodman S L 2000 Submicron multiphoton free-form fabrication of proteins and polymers: studies of reaction efficiencies and applications in sustained release Macromolecules 33 1514-23
24. Arcaute K, Mann B K and Wicker R B 2006 Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells Ann. Biomed. Eng. 34 1429-41
25. Greene L A and Tischler A S 1976 Establishment of a noradrenergic clonal line of rat adrenal pheochromocytoma cells which respond to nerve growth factor Proc. Natl. Acad. Sci. USA 73 2424-8
26. Matsuda T, Kwon I I and Kidoaki S 2004 Photocurable biodegradable liquid copolymers: synthesis of acrylate-end- capped trimethylene carbonate-based prepolymers, photocuring, and hydrolysis Biomacromolecules 5 295-305
27. Fedorovich N E, Alblas J, de Wijn J R, Hennink W E, Verbout A J and Dhert W J 2007 Hydrogels as extracellular matrices fir sjeketak tussye engineering: state-of-the-art and novel application in organ printing Tissue Eng. 13 1905-25
28. Ikuta K and Hirowatari K 1993 Real three dimensional micro fabrication using stereo lithography and metal molding Proc. IEEE Int. Workshop on Micro Electro Mechanical System (MEMS-93) pp 42-7
29. Maruo S, Ikuta K and Korogi H 2003 Submicron manipulation tools driven by light in a liquid Appl. Phys. Lett. 82 133-5
30. Maruo S, Ikuta K and Korogi H 2003 Force-controllable, optically driven micromachines fabricated by single-step two-photon microstereolithography J. Microelectromech. Syst. 12 533-9
31. Maruo S, Nakamura O and Kawata S 1997 Three-dimensional microfabrication with two-photon-absorbed photopolymerization Opt. Lett. 22 132-4
32. Maruo S and Kawata S 1998 Two-photon-absorbed near-infrared photopolymerization for three-dimensional microfabrication J. Microelectromech. Syst. 7 411-5
33. Maruo S and Ikuta K 2000 Three-dimensional microfabrication by use of single-photon-absorbed polymerization Appl. Phys. Lett. 76 2656-8
34. Maruo S and Ikuta K 2002 Submicron stereolithography for the production of freely movable mechanisms by using single-photon polymerization Sensors Actuators A-Phys. 100 70-6
35. Gupta M C and Deshmukh V G 1982 Thermal oxidative degradation of poly-lactic acid: I.: Activation energy of thermal degradation in air Colloid Polym. Sci. 260 308-11
36. Gupta M C and Deshmukh V G 1982 Thermal oxidative degradation of poly-lactic acid: II. Molecular weight and electronic spectra during isothermal heating Colloid Polym. Sci. 260 514-7
37. Zhang X, Wyss U P, Pichora D and Goosen M F A 1992 An investigation of the synthesis and thermal stability of poly(DL-lactide) Polym. Bull. 27 623-9
38. Törmälä P, Vasenius J, Vainionpää S, Laiho J, Pohjonen T and Rokkanen P 1991 Ultra-high-strength absorbable self-reinforced polyglycolide (SR-PGA) composite rods for internal fixation of bone fractures: in vitro and in vivo study J. Biomed. Mater. Res. 25 1-22
39. Ikuta K, Maruo S, Fujisawa T and Yamada A 1999 Micro concentrator with opto-sense micro reactor for biochemical IC chip family-3D composite structure and experimental verification Proc. IEEE Int. Workshop on Micro Electro Mechanical System (MEMS-99) pp 376-81