Experimental study of the effect of additive on the tribological properties journal bearing under running-in and start-up or shut-down stages

Industrial Lubrication and Tribology

Volumn 60, Issue 3, 2008, Pages 138-146

  Durak, Ertuǧrul ^a   Adatepe, Hakan ^b   Biyiklioǧlu, Aydin ^b  

^a SULEYMAN DEMIREL UNIVERSITY   (Turkey)

^b KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Additives; Bearings; Friction; Lubrication; Oils; Wear

Indexed keywords

FRICTION; JOURNAL BEARINGS; TRIBOLOGY; WEAR OF MATERIALS;

PROTECTIVE LAYER; SLIDING BEARING'S SURFACES; TRIBOLOGICAL PROPERTIES;

ADDITIVES;

EID: 42549088078     PISSN: 00368792     EISSN: None     Source Type: Journal    
DOI: 10.1108/00368790810871066     Document Type: Article

References (19)

1. Andersson, P., Juhanko, J., Nikkilä, A.P. and Lintula, P. (1996), "Influence of topography on the running-in of water-lubricated silicon carbide journal bearings", Wear, Vol. 201, pp. 1-9.
2. Chou, C.C. and Lin, J.F. (1997), "Tribological effects of roughness and running-in on oil-lubricated line contacts", Proc. Instn. Mech. Engrs., Part J, Vol. 211, pp. 209-22.
3. Durak, E. (2004), "A study on friction behavior of rapeseed oil as an environmentally friendly additive in lubricating oil", Industrial Lubrication and Tribology, Vol. 56 No. 1, pp. 23-37.
4. Durak, E., Kurbanolu, C., Biyikliolu, A. and Kaleli, H. (2003), "Measurement of friction force and effects of oil fortifier in engine journal bearings under dynamic loading conditions", Tribology International, Vol. 36 No. 8, pp. 599-607.
5. Henry, S.D. (Ed.) (1998), ASM Handbook: Friction, Lubrication, and Wear Technology, Vol. 18, ASM International, Cleveland, OH, pp. 519-20.
6. Horng, J.H., Len, M.L. and Lee, J.S. (2002), "The contact characteristics of rough surfaces in line contact during running-in process", Wear, Vol. 253, pp. 899-913.
7. Hwang, D.H. and Zum Gahr, K.H. (2003), "Transition from static to kinetic friction of unlubricated or oil lubricated steel/steel, steel/ceramic and ceramic/ceramic pairs", Wear, Vol. 255, pp. 365-75.
8. Ikeuchi, K., Fujita, S. and Ohashi, M. (1998), "Analysis of fluid film formation between contacting compliant solids", Tribology International, Vol. 31 No. 10, pp. 613-8.
9. Industrial Lubrication and Tribology (1997), "Product review, lubricant additives", Industrial Lubrication and Tribology, Vol. 49 No. 1, pp. 15-30.
10. Kaleli, H. and Berthier, Y. (2001), "The mechanism of layer formation and the function of additives used in fully formulated engine crankcase oils, boundary and mixed lubrication: science and applications", Proceedings of the 28th Leeds-Lyon Symposium on Tribology as a Part World Tribology Congress, WTC Tribology Series 40, Vienna, Austria, 4-7 September, pp. 189-97.
11. Kaleli, H. and Durak, E. (2003), "Effects of boron oil fortifier on friction and pressure distribution in engine journal bearings", Industrial Lubrication and Tribology, Vol. 55 No. 3, pp. 121-7.
12. Lubrication Solution and Product Catalogue (1990), Technical Bulletin No. 1 and 2, Power Up Inc., Calgary.
13. Ludema, K.C. (2001), "Friction", in Bhushan, B. (Ed.), Modern Tribology Handbook, Vol. I, CRC Press, Boca Raton, FL, pp. 205-33.
14. Lugt, P.M., Severt, R.W.M., Fogelström, J. and Tripp, J.H. (2001), "Influence of surface topography on friction, film breakdown and running-in in the mixed lubrication regime", Proc. Instn. Mech. Engrs., Part J, Vol. 215, pp. 519-33.
15. Monmousseau, P. and Filon, M. (2000), "Transient thermoelastohydrodynamic analysis for safe operating conditions of a tilting-pad journal bearing during start-up", Tribology International, Vol. 33, pp. 225-31.
16. Nogueria, I., Dias, A.M., Gras, R. and Progri, R. (2002), "An experiment model for mixed friction during running-in", Wear, Vol. 253, pp. 541-9.
17. Pathak, J.P., Torabian, H. and Tiwari, S.N. (1997), "Antiseizure and antifriction characteristics of A1-Si-Pb alloys", Wear, Vol. 202, pp. 134-41.
18. Shell Mineral Oil and Greases Catalogue (1994), available at: www.shell.com.tr (in Turkish).
19. So, H. and Hu, C.C. (2005), "Determination of load carrying ability of chemical films developed in sliding point contact", Tribology International, Vol. 38, pp. 435-41.