메뉴 건너뛰기




Volumn 203-204, Issue , 1997, Pages 11-21

Sliding wear and friction characteristics of six Zn-based die-casting alloys

Author keywords

ACuZinc alloy; Friction; Sliding wear; Zn alloys

Indexed keywords

CARBON STEEL; COMPOSITION EFFECTS; CRACKS; DIE CASTINGS; FRICTION; HARDNESS; INTERFACES (MATERIALS); METALLOGRAPHIC MICROSTRUCTURE; VISCOUS FLOW; WEAR OF MATERIALS; WEAR RESISTANCE; ZINC CASTINGS;

EID: 4243981355     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07367-X     Document Type: Article
Times cited : (45)

References (28)
  • 2
    • 0043256729 scopus 로고
    • ACuZinc: Improved zinc alloys for die casting applications
    • Society of Automotive Engineers, Detroit, MI
    • M.D. Hanna and M.S. Rashid, ACuZinc: improved zinc alloys for die casting applications, Society of Automotive Engineers, Technical Paper 930788, Detroit, MI, 1993.
    • (1993) Technical Paper 930788
    • Hanna, M.D.1    Rashid, M.S.2
  • 4
    • 0043256730 scopus 로고    scopus 로고
    • The influence of composition and microstructure on the strength of zinc alloys, recent advances in science, technology and applications of Zn-Al alloys
    • M.D. Hanna and M.S. Rashid, The influence of composition and microstructure on the strength of zinc alloys, recent advances in science, technology and applications of Zn-Al alloys, Proceedings of the 3rd Int. Conf. on Zn-Al Alloys, Mexico City, Mexico, March 29-30, 1994, pp. 95-100.
    • Proceedings of the 3rd Int. Conf. on Zn-Al Alloys, Mexico City, Mexico, March 29-30, 1994 , pp. 95-100
    • Hanna, M.D.1    Rashid, M.S.2
  • 7
    • 84950461015 scopus 로고
    • The Influence of the Atomic Nature of Crystalline Materials on Friction
    • Donald H. Buckley, The Influence of the Atomic Nature of Crystalline Materials on Friction, ASLE Trans., 11 (1968) 89-100.
    • (1968) ASLE Trans. , vol.11 , pp. 89-100
    • Buckley, D.H.1
  • 9
    • 0042755611 scopus 로고
    • Formation of wear debris due to adhesion
    • K.C. Ludema (ed.), ASME, New York
    • Zum Gahr, Formation of wear debris due to adhesion, in K.C. Ludema (ed.), Wear of Materials 1981, ASME, New York, 1981, pp. 396-405.
    • (1981) Wear of Materials 1981 , pp. 396-405
    • Gahr, Z.1
  • 10
    • 0019438040 scopus 로고
    • Freezing point depression within a shear field, with a special reference to metallurgical transformation occurring during wear
    • K.C. Ludema (ed.), ASME, New York
    • T. Sasada and H. Mishina, Freezing point depression within a shear field, with a special reference to metallurgical transformation occurring during wear, in K.C. Ludema (ed.), Wear of Materials 1981, ASME, New York, 1981, pp. 82-87.
    • (1981) Wear of Materials 1981 , pp. 82-87
    • Sasada, T.1    Mishina, H.2
  • 12
    • 0020588182 scopus 로고
    • Observation of zinc diffusion and phase transformation on the surface of abraded β-brass
    • K.C. Ludema (ed.), ASME, New York
    • M. Uemura, K. Okada, A. Okitsu and N. Takahashi, Observation of zinc diffusion and phase transformation on the surface of abraded β-brass, in K.C. Ludema (ed.), Wear of Materials 1983, ASME, New York, 1983, pp. 107-111.
    • (1983) Wear of Materials 1983 , pp. 107-111
    • Uemura, M.1    Okada, K.2    Okitsu, A.3    Takahashi, N.4
  • 13
    • 0002827550 scopus 로고
    • Zinc alloys compete with bronze in bearings and bushings
    • November
    • Kenneth J. Altorfer, Zinc alloys compete with bronze in bearings and bushings, Metal Progr., (November 1982) 29-31.
    • (1982) Metal Progr. , pp. 29-31
    • Altorfer, K.J.1
  • 14
    • 0043256728 scopus 로고
    • Comparative wear rate evaluation of zinc aluminum (ZA) and bronze alloys through block on ring testing and field applications
    • Society of Automotive Engineers, Detroit, MI, February
    • T.J. Risdon, R.J. Barnhurst and W.M. Mihaichuk, Comparative wear rate evaluation of zinc aluminum (ZA) and bronze alloys through block on ring testing and field applications, Society of Automotive Engineers, Technical Paper 860064, Detroit, MI, February 1986.
    • (1986) Technical Paper 860064
    • Risdon, T.J.1    Barnhurst, R.J.2    Mihaichuk, W.M.3
  • 15
    • 0022135269 scopus 로고
    • Tribological behaviour of ZnAl alloys (ZA27) compared with bronze when used as a bearing material with high load and at very low speed
    • Ph. Delneuville, Tribological behaviour of ZnAl alloys (ZA27) compared with bronze when used as a bearing material with high load and at very low speed, Wear, 105 (1985) 283-292.
    • (1985) Wear , vol.105 , pp. 283-292
    • Delneuville, Ph.1
  • 16
    • 0019113017 scopus 로고
    • The development of a family of zinc-base foundry alloys
    • E. Gervais, H. Levert and M. Bess, The development of a family of zinc-base foundry alloys, AFS Trans., (1980) 183-194.
    • (1980) AFS Trans. , pp. 183-194
    • Gervais, E.1    Levert, H.2    Bess, M.3
  • 18
    • 0041753671 scopus 로고
    • unpublished research
    • Richard C. Rosenberg, unpublished research, 1987.
    • (1987)
    • Rosenberg, R.C.1
  • 19
    • 0023360140 scopus 로고
    • Wear resistance and microstructure of Zn-Al-Si and Zn-Al-Cu alloys
    • Pekwah Pearl Lee, Temel Savaskan and Emmanuel Laufer, Wear resistance and microstructure of Zn-Al-Si and Zn-Al-Cu alloys, Wear, 177 (1987) 79-89.
    • (1987) Wear , vol.177 , pp. 79-89
    • Lee, P.P.1    Savaskan, T.2    Laufer, E.3
  • 21
    • 0024866448 scopus 로고
    • Effect of Mn on lubricated friction and wear properties of Zn-Al alloy
    • K.C. Ludema (ed.), ASME, New York
    • T. Ma, Q.-D. Chen, S.-C. Li and H.-M. Wang, Effect of Mn on lubricated friction and wear properties of Zn-Al alloy, in K.C. Ludema (ed.), Wear of Materials 1989, ASME, New York, 1989, pp. 297-304.
    • (1989) Wear of Materials 1989 , pp. 297-304
    • Ma, T.1    Chen, Q.-D.2    Li, S.-C.3    Wang, H.-M.4
  • 22
    • 0042254324 scopus 로고
    • Tribological studies on cast zinc-aluminum alloys
    • V.G.S. Mani, P. Sriram, N. Raman and S. Seshan, Tribological studies on cast zinc-aluminum alloys, AFS Trans., 88-100 (1988) 525-532.
    • (1988) AFS Trans. , vol.88-100 , pp. 525-532
    • Mani, V.G.S.1    Sriram, P.2    Raman, N.3    Seshan, S.4
  • 23
    • 0023341659 scopus 로고
    • Mechanical properties and lubricated wear of Zn-25Al-based alloys
    • T. Savaskan and S. Murphy, Mechanical properties and lubricated wear of Zn-25Al-based alloys, Wear, 116 (1987) 211-224.
    • (1987) Wear , vol.116 , pp. 211-224
    • Savaskan, T.1    Murphy, S.2
  • 24
    • 0021758162 scopus 로고
    • Comparative wear behaviour of Zn-Al-based alloys in an automotive engine application
    • Samuel Murphy and Temel Savaskan, Comparative wear behaviour of Zn-Al-based alloys in an automotive engine application, Wear, 98 (1984) 151-161.
    • (1984) Wear , vol.98 , pp. 151-161
    • Murphy, S.1    Savaskan, T.2
  • 25
    • 0043256691 scopus 로고
    • Standard test method for calibration and operation of the Falex block-on-ring friction and wear testing machine, ASTM D 2714-88
    • ASTM, Philadelphia, PA
    • Standard test method for calibration and operation of the Falex block-on-ring friction and wear testing machine, ASTM D 2714-88, 1988 Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1988, pp. 386-389.
    • (1988) 1988 Annual Book of ASTM Standards , pp. 386-389
  • 26
    • 0043256692 scopus 로고
    • Standard practice for ranking resistance of materials to sliding wear using block-on-ring wear test, ASTM G 77-83
    • ASTM, Philadelphia, PA
    • Standard practice for ranking resistance of materials to sliding wear using block-on-ring wear test, ASTM G 77-83, 1990 Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1990, pp. 310-321.
    • (1990) 1990 Annual Book of ASTM Standards , pp. 310-321
  • 28
    • 0042755604 scopus 로고
    • unpublished research
    • M.D. Hanna, unpublished research, 1989.
    • (1989)
    • Hanna, M.D.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.