In Vitro Measurements of Implant Stability

Mechanical Testing of Bone and the Bone-Implant Interface

Volumn , Issue , 1999, Pages 515-526

  Berzins, Aivars ^a   Sumner, Dale R ^a,b  

^a RUSH MEDICAL COLLEGE   (United States)

^b Department of Anatomy ^*  (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 4243755830     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (71)

1. Charnley, J. and Kettlewell, J., The elimination of slip between prosthesis and femur, J. Bone Joint Surg., 47B, 56, 1965.
2. Nilsson, K.G. and Karrholm, J., RSA in the assessment of aseptic loosening, J. Bone Joint Surg., 78B, 1, 1997.
3. Berzins, A., Sumner, D.R., Andriacchi, T.P., and Galante, J.O., Stem curvature and load angle influence the initial relative bone-implant motion of cementless femoral stems, J. Orthop. Res., 11, 758, 1993.
4. Sumner, D.R., Berzins, A., Turner, T.M., et al., Initial in vitro stability of the tibial component in a canine model of cementless total knee replacement, J. Biomech., 27, 929, 1994.
5. Keaveny, T.M. and Bartel, D.L., Effects of porous coating, with and without collar support, on early relative motion for a cementless hip prosthesis, J. Biomech., 26, 1355, 1993.
6. Weinans, H., Huiskes, R., and Grootenboer, H.J., Quantitative analysis of bone reactions to relative motions at implant-bone interfaces, J. Biomech., 26, 1271, 1993.
7. Buhler, D.W., Oxland, T.R., and Nolte, L.P., Design and evaluation of a device for measuring threedimensional micromotions of press-fit femoral stem prostheses, Med. Eng. Phys., 19, 187, 1997.
8. Schneider, E., Schonenberger, U., Giraud, P., and Burgi, M., [Initial stability and pelvic deformation in cemented and non-cemented acetabular components], Orthopade, 21, 57, 1992 [in German].
9. Schneider, E., Eulenberger, J., Steiner, W., et al., Experimental method for the in vitro testing of the initial stability of cementless hip prostheses, J. Biomech., 22, 735, 1989.
10. Stern, S. H., Wills, R. D., and Gilbert, J. L., The effect of tibial stem design on component micromotion in knee arthroplasty, Clin. Orthop., 345, 44, 1997.
11. Ohlin, A. and Balkfors, B., Stability of cemented sockets after 3-14 years, J. Arthroplasty, 7, 87, 1992.
12. Jansson, V., Zimmer, M., Kuhne, J.H., and Sailer, F.P. [Initial stability of an implanted cement-canal prosthesis. Results in experimental studies on human cadaver femurs], Z Orthop., 131, 377, 1993 [in German].
13. Curtis, M.J., Jinnah, R.H., Wilson, V.D., and Hungerford, D.S., The initial stability of uncemented acetabular components, J. Bone Joint Surg., 74B, 372, 1992.
14. Whiteside, L.A., Amador, D., and Russell, K., The effects of the collar on total hip femoral component subsidence, Clin. Orthop., 231, 120, 1988.
15. Kendrick, J.B., Noble, P.C., and Tullos, H.S., Distal stem design and the torsional stability of cementless femoral stems, J. Arthroplasty, 10, 463, 1995.
16. Walker, P.S., Hsu, H.P., and Zimmerman, R.A., A comparative study of uncemented tibial components, J. Arthroplasty, 5, 245, 1990.
17. Schreurs, B.W., Huiskes, R., Buma, P., and Sloof, T. J., Biomechanical and histological evaluation of a hydroxyapatite-coated titanium femoral stem fixed with an intramedullary morselized bone grafting technique: an animal experiment on goats, Biomaterials, 17, 1177, 1996.
18. Schreurs, B.W., Buma, P., Huiskes, R., et al., Morselized allografts for fixation of the hip prosthesis femoral component, Acta Orthop. Scand., 65, 267, 1994.
19. Schimmel, J.W., Buma, P., Versleyen, D., et al., Acetabular reconstruction with impacted morselized cancellous allografts in cemented hip arthroplasty, J. Arthroplasty, 13, 438, 1998.
20. Stulberg, B.N., Watson, J.T., Stulberg, S.D., et al., A new model to assess tibial fixation. II. Concurrent histologic and biomechanical observations, Clin. Orthop., 263, 303, 1991.
21. Lee, T.Q., Lewis, D.A., Barnett, S.L., et al., Structural integrity of implanted WMT infinity hip and osteonics omnifit hip in fresh cadaveric femurs, J. Biomed. Mater. Res., 39, 516, 1998.
22. Miura, H., Whiteside, L.A., Easley, J.C., and Amador, D.D., Effects of screws and a sleeve on initial fixation in uncemented total knee tibial components, Clin. Orthop., 259, 160, 1990.
23. Yoshii, I., Whiteside, L.A., Milliano, M.T., and White, S.E., The effect of central stem and stem length on micromovement of the tibial tray, J. Arthroplasty, 7, 433, 1992.
24. Phillips, T.W., Nguyen, L.T., and Munro, S.D., Loosening of cementless femoral stems: a biomechanical analysis of immediate fixation with loading vertical, femur horizontal, J. Biomech., 24, 37, 1991.
25. Bergmann, G., Graichen, F., Rohlmann, A., and Linke, H., Hip joint forces during load carrying, Clin. Orthop., 335, 190, 1997.
26. Bergmann, G., Siraky, J., Rohlmann, A., and Koelbel, R., A comparison of hip joint forces in sheep, dog and man, J. Biomech., 17, 907, 1984.
27. Bergmann, G., Graichen, F., and Rohlmann, A., Hip joint loading during walking and running, measured in two patients, J. Biomech., 26, 969, 1993.
28. Bergmann, G., Graichen, F. and Rohlmann, A., Is staircase walking a risk for the fixation of hip implants? J. Biomech., 28, 535, 1995.
29. Davy, D.T., Kotzar, G.M., Brown, R.H., et al., Telemetric force measurements across the hip after total arthroplasty, J. Bone Joint Surg., 70A, 45, 1988.
30. Kotzar, G.M., Davy, D.T., Berilla, J., and Goldberg, V.M., Torsional loads in the early postoperative period following total hip replacement, J. Orthop. Res., 13, 945, 1995.
31. Kotzar, G.M., Davy, D.T., Goldberg, V.M., et al., Telemeterized in vivo hip joint force data: a report on two patients after total hip surgery, J. Orthop. Res., 9, 621, 1991.
32. Page, A.E., Allan, C., Jasty, M., et al., Determination of loading parameters in the canine hip in vivo, J. Biomech., 26, 571, 1993.
33. Gilbert, J.L., Bloomfeld, R.S., Lautenschlager, E.P., and Wixson, R. L., A computer-based biomechanical analysis of the three-dimensional motion of cementless hip prostheses, J. Biomech., 25, 329, 1992.
34. McKellop, H., Ebramzadeh, E., Niederer, P.G., and Sarmiento, A., Comparison of the stability of press-fit hip prosthesis femoral stems using a synthetic model femur, J. Orthop. Res., 9, 297, 1991.
35. Burke, D.W., O’Connor, D.O., Zalenski, E.B., et al., Micromotion of cemented and uncemented femoral components, J. Bone Joint Surg., 73B, 33, 1991.
36. Callaghan, J.J., Fulghum, C.S., Glisson, R.R., and Stranne, S.K., The effect of femoral stem geometry on interface motion in uncemented porous-coated total hip prostheses: comparison of straight-stem and curved-stem designs, J. Bone Joint Surg., 74-A, 839, 1992.
37. Maloney, W.J., Jasty, M., Burke, D.W., et al., Biomechanical and histologic investigation of cemented total hip arthroplasties, Clin. Orthop., 249, 129, 1989.
38. Finkelstein, J.A., Anderson, G.I., Waddell, J.P., et al., A study of micromotion and appositional bone growth to a canine madreporic-surfaced femoral component, J. Arthroplasty, 9, 317, 1994.
39. Munting, E. and Verhelpen, M., Fixation and effect on bone strain pattern of a stemless hip prosthesis, J. Biomech., 28, 949, 1995.
40. Berzins, A., Sumner, D.R., Wasielewski, R.C., and Galante, J.O., Impacted particulate allograft for femoral revision total hip arthroplasty: in vitro mechanical stability and effects of cement pressurization, J. Arthroplasty, 11, 500, 1996.
41. Jasty, M., Krushell, R.J., Zalenski, E., et al., The contribution of the nonporous distal stem to the stability of proximally porous-coated canine femoral components, J. Arthroplasty, 8, 33, 1993.
42. Walker, P.S., Schneeweis, D., Murphy, S., and Nelson, P., Strains and micromotion of press-fit femoral stem prostheses, J. Biomech., 20, 693, 1987.
43. Doehring, T.C., Rubash, H.E., Shelley, F.J., et al., Effect of superior and superolateral relocations of the hip center on hip joint forces. An experimental and analytical analysis, J. Arthroplasty, 11, 693, 1996.
44. Volz, R.G. and Wilson, R.J., Factors affecting the mechanical stability of the cemented acetabular component in total hip replacement, J. Bone Joint Surg., 59, 501, 1977.
45. Kraemer, W.J., Harrington, I.J., and Hearn, T.C., Micromotion secondary to axial, torsional, and shear loads in two models of cementless tibial components, J. Arthroplasty, 10, 227, 1995.
46. Markolf, K.L., Amstutz, H.C., and Hirschowitz, D.L., The effect of calcar contact on femoral component micromovement, J. Bone Joint Surg., 62A, 1315, 1980.
47. Lee, R.W., Volz, R.G., and Sheridan, D.C., The role of fixation and bone quality on the mechanical stability of tibial knee components, Clin. Orthop., 273, 177, 1991.
48. Sugiyama, H., Whiteside, L.A., Engh, C.A., and Otani, T., Late mechanical stability of the proximal coated AML prosthesis, Orthopedics, 17, 583, 1994.
49. Sugiyama, H., Whiteside, L.A., and Kaiser, A.D., Examination of rotational fixation of the femoral component in total hip arthroplasty. A mechanical study of micromovement and acoustic emission, Clin. Orthop., 249, 122, 1989.
50. Sugiyama, H., Whiteside, L.A., and Engh, C.A., Torsional fixation of the femoral component in total hip arthroplasty, Clin. Orthop., 275, 187, 1992.
51. Ohl, M.D., Whiteside, L.A., McCarthy, D.S., and White, S.E., Torsional fixation of a modular femoral hip component, Clin. Orthop., 287, 135, 1993.
52. Otani, T., Whiteside, L.A., White, S.E., and McCarthy, D.S., Reaming technique of the femoral diaphysis in cementless total hip arthroplasty, Clin. Orthop., 311, 210, 1995.
53. Channer, M.A., Glisson, R.R., Seaber, A.V., and Vail, T.P., Use of bone compaction in total knee arthroplasty, J. Arthroplasty, 11, 743, 1996.
54. Mahomed, N., Schatzker, J., and Hearn, T., Biomechanical analysis of a distally interlocked press-fit femoral total hip prosthesis, J. Arthroplasty, 8, 129, 1993.
55. Manley, P.A., Vanderby, R., Kohles, S., et al., Alterations in femoral strain, micromotion, cortical geometry, cortical porosity, and bony ingrowth in uncemented collared and collarless prostheses in the dog, J. Arthroplasty, 10, 63, 1995.
56. Fischer, K.J., Carter, D.R., and Maloney, W.J., In vitro study of initial stability of a conical collared femoral component, J. Arthroplasty, 7 (Suppl.), 389, 1992.
57. Maloney, W.J., Jasty, M., Burke, D.W., et al., Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling, Clin. Orthop., 249, 129, 1989.
58. Hua, J. and Walker, P.S., Relative motion of hip stems under load. An in vitro study of symmetrical, asymmetrical, and custom asymmetrical designs, J. Bone Joint Surg., 76A, 95, 1994.
59. Whiteside, L.A. and Easley, J.C., The effect of collar and distal stem fixation on micromotion of the femoral stem in uncemented total hip arthroplasty, Clin. Orthop., 145, 1989.
60. Otani, T., Whiteside, L.A., White, S.E., and McCarthy, D.S., Effects of femoral component material properties on cementless fixation in total hip arthroplasty, J. Arthroplasty, 8, 67, 1993.
61. Whiteside, L.A., White, S.E., Engh, C.A., and Head, W., Mechanical evaluation of cadaver retrieval specimens of cementless bone-ingrown total hip arthroplasty femoral components, J. Arthroplasty, 8, 147, 1993.
62. Kaiser, A.D. and Whiteside, L.A., The effect of screws and pegs on the initial fixation stability of an uncemented unicondylar knee replacement, Clin. Orthop., 259, 169, 1990.
63. Branson, P.J., Steege, J.W., Wixson, R.L., et al., Rigidity of initial fixation with uncemented tibial knee implants, J. Arthroplasty, 4, 21, 1989.
64. Wyatt, R.W., Alpert, J.P., Daniels, A.U., et al., The effect of screw fixation on initial rigidity of tibial knee components, J. Appl. Biomater., 2, 109, 1991.
65. Shimagaki, H., Bechtold, J.E., Sherman, R.E., and Gustilo, R.B., Stability of initial fixation of the tibial component in cementless total knee arthroplasty, J. Orthop. Res., 8, 64, 1990.
66. Volz, R.G., Nisbet, J.K., Russel, W.L., and McMurtry, M.G., The mechanical stability of various noncemented tibial components, Clin. Orthop., 226, 38, 1988.
67. Kwong, L.M., O’Connor, D.O., Sedlacek, R.C., et al., A quantitative in vitro assessment of fit and screw fixation on the stability of a cementless hemispherical acetabular component, J. Arthroplasty, 9, 163, 1994.
68. Lachiewicz, P.F., Suh, P.B., and Gilbert, J.A., In vitro initial fixation of porous-coated acetabular total hip components. A biomechanical comparative study, J. Arthroplasty, 4, 201, 1989.
69. Won, C.H., Hearn, T.C., and Tile, M., Micromotion of cementless hemispherical acetabular components. Does press-fit need adjunctive screw fixation? J. Bone Joint Surg., 77B, 484, 1995.
70. Perona, P.G., Lawrence, J., Paprosky, W.G., et al., Acetabular micromotion as a measure of initial implant stability in primary hip arthroplasty, J. Arthroplasty, 7, 537, 1992.
71. Stiehl, J.B., MacMillan, E., and Skrade, D.A., Mechanical stability of porous-coated acetabular components in total hip arthroplasty, J. Arthroplasty, 6, 295, 1991.