-
1
-
-
0029178487
-
Development of a strength model for the cocured stepped lap joints under tensile loading
-
Kim H.S., Lee S.J., and Lee D.G. Development of a strength model for the cocured stepped lap joints under tensile loading. Compos Struct 32 (1995) 593-600
-
(1995)
Compos Struct
, vol.32
, pp. 593-600
-
-
Kim, H.S.1
Lee, S.J.2
Lee, D.G.3
-
2
-
-
0037544303
-
Study on co-cured composite panels with blade-shaped stiffeners
-
Huang C.K. Study on co-cured composite panels with blade-shaped stiffeners. Composites: Part A 34 (2003) 403-410
-
(2003)
Composites: Part A
, vol.34
, pp. 403-410
-
-
Huang, C.K.1
-
3
-
-
0038819127
-
The manufacturing process of co-cured single and doublelap joints and evaluation of the load-bearing capacities of co-cured joints
-
Shin K.C., Lim J.O., and Lee J.J. The manufacturing process of co-cured single and doublelap joints and evaluation of the load-bearing capacities of co-cured joints. J Mater Process Technol 138 (2003) 89-96
-
(2003)
J Mater Process Technol
, vol.138
, pp. 89-96
-
-
Shin, K.C.1
Lim, J.O.2
Lee, J.J.3
-
4
-
-
33748905108
-
Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress
-
Kim H.S., Park S.W., and Lee D.G. Smart cure cycle with cooling and reheating for co-cure bonded steel/carbon epoxy composite hybrid structures for reducing thermal residual stress. Composites: Part A 37 (2006) 1708-1721
-
(2006)
Composites: Part A
, vol.37
, pp. 1708-1721
-
-
Kim, H.S.1
Park, S.W.2
Lee, D.G.3
-
5
-
-
0032056412
-
Optimization of the co-curing of two different composites with the aim of minimising residual curing stress levels
-
Olivier P., and Cottu J.P. Optimization of the co-curing of two different composites with the aim of minimising residual curing stress levels. Compos Sci Technol 58 (1998) 645-651
-
(1998)
Compos Sci Technol
, vol.58
, pp. 645-651
-
-
Olivier, P.1
Cottu, J.P.2
-
6
-
-
33745917132
-
Optimum design of the co-cured double lap joint composed of aluminum and carbon epoxy composite
-
Park S.W., Kim H.S., and Lee D.G. Optimum design of the co-cured double lap joint composed of aluminum and carbon epoxy composite. Compos Struct 75 (2006) 289-297
-
(2006)
Compos Struct
, vol.75
, pp. 289-297
-
-
Park, S.W.1
Kim, H.S.2
Lee, D.G.3
-
7
-
-
32644436070
-
Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads
-
Shin K.C., and Lee J.J. Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads. Composites: Part A 37 (2006) 476-487
-
(2006)
Composites: Part A
, vol.37
, pp. 476-487
-
-
Shin, K.C.1
Lee, J.J.2
-
8
-
-
0031193744
-
Mode II delamination toughness of stitched graphite/epoxy textile composites
-
Sankar B.V., and Sharma S.K. Mode II delamination toughness of stitched graphite/epoxy textile composites. Compos Sci Technol 57 (1997) 729-737
-
(1997)
Compos Sci Technol
, vol.57
, pp. 729-737
-
-
Sankar, B.V.1
Sharma, S.K.2
-
9
-
-
0032100179
-
On the effects of stitching in CFRPs - II. Mode II delamination toughness
-
Jain L.K., Dransfield K.A., and Mai Y.-W. On the effects of stitching in CFRPs - II. Mode II delamination toughness. Compos Sci Technol 58 (1997) 829-837
-
(1997)
Compos Sci Technol
, vol.58
, pp. 829-837
-
-
Jain, L.K.1
Dransfield, K.A.2
Mai, Y.-W.3
-
10
-
-
0032096528
-
On the effects of stitching in CFRPs - I. Mode I delamination toughness
-
Dransfield K.A., Jain L.K., and Mai Y.-W. On the effects of stitching in CFRPs - I. Mode I delamination toughness. Compos Sci Technol 58 (1997) 815-827
-
(1997)
Compos Sci Technol
, vol.58
, pp. 815-827
-
-
Dransfield, K.A.1
Jain, L.K.2
Mai, Y.-W.3
-
11
-
-
4143060199
-
Thickness effects on the compressive stiffness and strength of stitched composite laminates
-
Gunnion A.J., Scott M.L., Thomson R.S., and Hachenberg D. Thickness effects on the compressive stiffness and strength of stitched composite laminates. Compos Struct 66 (2004) 479-486
-
(2004)
Compos Struct
, vol.66
, pp. 479-486
-
-
Gunnion, A.J.1
Scott, M.L.2
Thomson, R.S.3
Hachenberg, D.4
-
12
-
-
3042652828
-
Finite element analysis of low-velocity impact damage of stitched laminates
-
Chen G., Li Z., Kou C., and Gui L. Finite element analysis of low-velocity impact damage of stitched laminates. J Reinf Plast Compos 23 9 (2004) 987-995
-
(2004)
J Reinf Plast Compos
, vol.23
, Issue.9
, pp. 987-995
-
-
Chen, G.1
Li, Z.2
Kou, C.3
Gui, L.4
-
13
-
-
33747586774
-
Impact properties of laminated composites with stitching fibers
-
Byun J.-H., Song S.-W., Lee C.-H., Um M.-K., and Hwang B.-S. Impact properties of laminated composites with stitching fibers. Compos Struct 76 (2006) 21-27
-
(2006)
Compos Struct
, vol.76
, pp. 21-27
-
-
Byun, J.-H.1
Song, S.-W.2
Lee, C.-H.3
Um, M.-K.4
Hwang, B.-S.5
-
14
-
-
0037402615
-
Static and fatigue behaviour of stitched graphite/epoxy composite laminates
-
Aymerich F., Priolo P., and Sun C.T. Static and fatigue behaviour of stitched graphite/epoxy composite laminates. Compos Sci Technol 63 (2003) 907-917
-
(2003)
Compos Sci Technol
, vol.63
, pp. 907-917
-
-
Aymerich, F.1
Priolo, P.2
Sun, C.T.3
-
15
-
-
0034971234
-
Ballistic impact and explosive blast resistance of stitched composites
-
Mouritz A.P. Ballistic impact and explosive blast resistance of stitched composites. Composites: Part B 32 (2004) 431-439
-
(2004)
Composites: Part B
, vol.32
, pp. 431-439
-
-
Mouritz, A.P.1
-
16
-
-
0030230623
-
A numerical study on stresses in resin transfer moulding lap joints reinforced with transverse stitching
-
Tong L., and Steven G.P. A numerical study on stresses in resin transfer moulding lap joints reinforced with transverse stitching. Compos Struct 36 (1996) 91-100
-
(1996)
Compos Struct
, vol.36
, pp. 91-100
-
-
Tong, L.1
Steven, G.P.2
-
17
-
-
0032004678
-
Failure of transversely stitched RTM lap joints
-
Tong L., Jain L.K., Leong K.H., Kelly D., and Herszberg I. Failure of transversely stitched RTM lap joints. Compos Sci Technol 58 (1997) 221-227
-
(1997)
Compos Sci Technol
, vol.58
, pp. 221-227
-
-
Tong, L.1
Jain, L.K.2
Leong, K.H.3
Kelly, D.4
Herszberg, I.5
-
18
-
-
13844271451
-
Analysis of the fracture behaviour of a stitched single-lap joint
-
Aymerich F., Onnis R., and Priolo P. Analysis of the fracture behaviour of a stitched single-lap joint. Composites: Part A 36 (2005) 603-614
-
(2005)
Composites: Part A
, vol.36
, pp. 603-614
-
-
Aymerich, F.1
Onnis, R.2
Priolo, P.3
-
19
-
-
29244481675
-
Analysis of the effect of stitching on the fatigue strength of single-lap composite joints
-
Aymerich F., Onnis R., and Priolo P. Analysis of the effect of stitching on the fatigue strength of single-lap composite joints. Compos Sci Technol 66 (2006) 166-175
-
(2006)
Compos Sci Technol
, vol.66
, pp. 166-175
-
-
Aymerich, F.1
Onnis, R.2
Priolo, P.3
-
20
-
-
33644872387
-
Effectiveness of z-pins in preventing delamination of co-cured composite joints on the example of a double cantilever test
-
Byrd L.W., and Birman V. Effectiveness of z-pins in preventing delamination of co-cured composite joints on the example of a double cantilever test. Composites: Part B 37 (2006) 365-378
-
(2006)
Composites: Part B
, vol.37
, pp. 365-378
-
-
Byrd, L.W.1
Birman, V.2
-
21
-
-
33845886954
-
Cohesive modeling of delamination in Z-pin reinforced composite laminates
-
Dantuluri V., Maiti S., Geubelle P.H., Patel R., and Kilic H. Cohesive modeling of delamination in Z-pin reinforced composite laminates. Compos Sci Technol 67 (2007) 616-631
-
(2007)
Compos Sci Technol
, vol.67
, pp. 616-631
-
-
Dantuluri, V.1
Maiti, S.2
Geubelle, P.H.3
Patel, R.4
Kilic, H.5
-
22
-
-
33746102545
-
Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension
-
Chang P., Mourtiz A.P., and Cox B.N. Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension. Compos Sci Technol 66 (2006) 2163-2176
-
(2006)
Compos Sci Technol
, vol.66
, pp. 2163-2176
-
-
Chang, P.1
Mourtiz, A.P.2
Cox, B.N.3
-
24
-
-
0036752104
-
Improving joints between composites and steel using perforations
-
Melograna J.D., and Grenestedt J.L. Improving joints between composites and steel using perforations. Composites: Part A 33 (2002) 1253-1261
-
(2002)
Composites: Part A
, vol.33
, pp. 1253-1261
-
-
Melograna, J.D.1
Grenestedt, J.L.2
-
25
-
-
0037326011
-
Adhesive tongue-and-groove joints between thin carbon fiber laminates and steel
-
Melograna J.D., Grenestedt J.L., and Maroun W.J. Adhesive tongue-and-groove joints between thin carbon fiber laminates and steel. Composites: Part A 34 (2003) 119-124
-
(2003)
Composites: Part A
, vol.34
, pp. 119-124
-
-
Melograna, J.D.1
Grenestedt, J.L.2
Maroun, W.J.3
-
26
-
-
33751534902
-
Evaluation of dimple treatment for GFRP/metal co-cured joint
-
Matsuzaki R., Shibata M., and Todoroki A. Evaluation of dimple treatment for GFRP/metal co-cured joint. Key Eng Mater 324-325 (2006) 1729-1732
-
(2006)
Key Eng Mater
, vol.324-325
, pp. 1729-1732
-
-
Matsuzaki, R.1
Shibata, M.2
Todoroki, A.3
-
27
-
-
38749132959
-
Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method
-
Matsuzaki R., Shibata M., and Todoroki A. Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method. Composites: Part A 39 (2008) 154-163
-
(2008)
Composites: Part A
, vol.39
, pp. 154-163
-
-
Matsuzaki, R.1
Shibata, M.2
Todoroki, A.3
|